构建西江现代物流体系 打造世界加工制造次中心

文章基于当前产业结构大调整背景,提出广西要在迎接产业转移的竞争中胜出,必须着力构建以西江水运为龙头的现代物流体系,从而把西江经济带打造成为与＂珠三角＂这一世界加工制造中心紧密联动的加工制造次中心。     

Numerical Simulation of Advanced Geological Forecasting Based on Multi- Source Seismic Interferometry北大核心CSCD

For existing advanced geological forecasting, the forecast distance is short and the test frequency is high, increasing test and construction risks. Since various methods have different requirements for the test environ-ment, preparation work can be tedious and result in a long construction time thereby affecting normal construction.A new advanced geological forecast technique based on multi-source seismic interferometry for tunnels is proposed.This technique uses the blast at one end of tunnel as a centrum and receives the signal at the other end of the tun-nel, therefore allowing advanced geological forecasting of the unexcavated tunnel part by relative processing and im-aging. A numerical simulation of this kind of geological forecasting using the finite difference method to simulate two kinds of unfavorable geological bodies (karst and a fault) predicted them accurately and verified the effective-ness and accuracy of this geological forecasting method. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

公路料场开采与生态恢复的环保措施研究

公路料场在开采时会直接给生态环境造成影响。文章结合实际以公路料场开采与恢复为研究对象,阐述公路料场开采中环境因素受到的影响,而后对石料开采与环境保护内容进行解析,同时提出了采石场生态恢复方法,希望分析后能够给相关的同类工程提供一些参考。     

多模块连接半潜式平台稳性对比分析

为开发我国海洋丰富的渔业、油气和旅游资源,可以在指定海域布设超大型浮式结构物,作为综合保障基地,提供船舶停靠、人员居住、渔业加工、油气开发、环境监测、飞机起降等多种功能.考虑到建造、运输等因素,超大型浮式结构物一般由多个相同或相似模块连接组成.本文基于一型半潜式平台模块,分别开展单、双、三模块的稳性分析,并对其稳性分析结果进行对比分析,探讨模块数量对平台稳性的影响,为超大型浮式结构物的后续设计与运营提供参考.     

船舶电网谐波分析

本文介绍了电力推进船舶谐波,阐明了谐波产生的原因和谐波的危害,分析总结了抑制船舶谐波的方法和措施。     

Buck斩波电路电流连续与电流断续的比较研究

对降压斩波电路负载加反电动势其电流在不同情况下发生的连续和断续现象进行了研究。根据分段线性化思想,推断出降压斩波电路输出电流在断续情况下的条件,给出了其在电流断续的计算公式,为其实际应用提供了方便。     

不同加筋形式对结构声辐射性能的影响

本文基于统计能量法分析了横向加筋板,纵向加筋板,斜加筋板,圆心在板角的圆弧形加筋板,圆心在板中轴的圆弧形加筋板,正交加筋板等六种不同加筋形式板在100Hz至1000Hz内的声辐射特性,研究表明正交加筋板的平均辐射声压级要低于另外五种形式的加筋板.研究了两类改变加强筋间距的横向加筋板的声辐射性能,研究表明对于固定左侧的一根加强筋改变加强筋间距,随着加强筋间距的增大,辐射声压级先增大后减小,而对于板中线为基准改变加强筋间距,对辐射声压级影响不大.最后,本文研究加筋板在主机舱中的实际应用,建立了三种主机舱模型,分析模型的声辐射特性,研究表明复合加筋形式的主机舱辐射声压级最小,相对于无加筋形式,要低4~5dB左右.     

玻璃钢防腐蚀材料检测方法

针对海洋环境下混凝土结构易遭受海水侵蚀导致结构破坏、而高性能混凝土等技术措施不能满足高耐久技术要求的现状,采用玻璃钢包覆防腐蚀技术以提高海工混凝土结构耐久性。对玻璃钢包覆防腐蚀材料的原材料和耐久性检测方法进行分析,提出原材料和耐久性检测方法,以利于玻璃钢防腐材料施工质量的控制。