Experimental investigation and comparison of nanoparticle emission characteristics in light-duty vehicles for two different fuels

In recent years, particle number emissions rather than particulate mass emissions in automotive engines have become the subject with controversial discussions. Recent results from studies of health effects imply that it is possible that particulate mass does not properly correlate with the variety of health effects attributed to engine exhaust. The concern is now focusing on nano-sized particles emitted from I. C. engines. In this study, particulate mass and particle number concentration emitted from light-duty vehicles were investigated for a better understanding of the characteristics of the engine PM from different types of fuels, such as gasoline and diesel fuel. Engine nano-particle mass and size distributions of four test vehicles were measured by a condensation particle counter system, which is recommended by the particle measurement program in Europe (PMP), at the end of a dilution tunnel along a NEDC test mode on a chassis dynamometer. We found that particle number concentrations of diesel passenger vehicles with DPF system are lower than gasoline passenger vehicles, but PM mass has some similar values. However, in diesel vehicles with DPF system, PM mass and particle number concentrations were greatly influenced by PM regeneration. Particle emissions in light-duty vehicles emitted about 90% at the ECE15 cycle in NEDC test mode, regardless of vehicle fuel type. Particle emissions at the early cold condition of engine were highly emitted in the test mode.     

Effect of WO<Subscript>3</Subscript> nanoparticle loading on the microstructural,mechanical and corrosion resistance of Zn matrix/TiO<Subscript>2</Subscript>-WO<Subscript>3</Subscript> nanocomposite coatings for marine application

In this study, for marine application purposes, we evaluated the effect of process parameter and particle loading on the microstructure, mechanical reinforcement and corrosion resistance properties of a Zn-TiO₂-WO₃ nanocomposite produced via electrodeposition. We characterized the morphological properties of the composite coatings with a Scanning Electron Microscope (SEM) equipped with an Energy Dispersive Spectrometer (EDS). We carried out mechanical examination using a Dura Scan hardness tester and a CERT UMT-2 multi-functional tribological tester. We evaluated the corrosion properties by linear polarization in 3.5% NaCl. The results show that the coatings exhibited good stability and the quantitative particle loading greatly enhanced the structural and morphological properties, hardness behavior and corrosion resistance of the coatings. We observed the precipitation of this alloy on steel is greatly influenced by the composite characteristics.     

Transportation mode detection – an in-depth review of applicability and reliability

The wide adoption of location-enabled devices, together with the acceptance of services that leverage (personal) data as payment, allows scientists to push through some of the previous barriers imposed by data insufficiency, ethics and privacy skepticism. The research problems whose study require hard-to-obtain data (e.g. transportation mode detection, service contextualisation, etc.) have now become more accessible to scientists because of the availability of data collecting outlets. One such problem is the detection of a user's transportation mode. Different fields have approached the problem of transportation mode detection with different aims: Location-Based Services (LBS) is a field that focuses on understanding the transportation mode in real-time, Transportation Science is a field that focuses on measuring the daily travel patterns of individuals or groups of individuals, and Human Geography is a field that focuses on enriching a trajectory by adding domain-specific semantics. While different fields providing solutions to the same problem could be viewed as a positive outcome, it is difficult to compare these solutions because the reported performance indicators depend on the type of approach and its aim (e.g. the real-time availability of LBS requires the performance to be computed on each classified location). The contributions of this paper are three fold. First, the paper reviews the critical aspects desired by each research field when providing solutions to the transportation mode detection problem. Second, it proposes three dimensions that separate three branches of science based on their main interest. Finally, it identifies important gaps in research and future directions, that is, proposing: widely accepted error measures meaningful for all disciplines, methods robust to new data sets and a benchmark data set for performance validation.     

Weather variability and travel behaviour – what we know and what we do not know

Given that severe weather conditions are becoming more frequent, it is important to understand the influence of weather on an individual’s daily activity-travel pattern. While some previously rare events are becoming more common, such as heavy rain, unpredicted snow, higher temperatures, it is still largely unknown how individuals will change and adapt their travel patterns in future climate conditions. Because of this concern, the number of research studies on weather and travel behaviour has increased in recent decades. Most of these empirical studies, however, have not used a cost–benefit analysis (CBA) framework, which serves as the the main tool for policy evaluation and project selection by stakeholders. This study summarises the existing findings regarding relationships between weather variability and travel behaviour, and critically assesses the methodological issues in these studies. Several further research directions are suggested to bridge the gap between empirical evidence and current practices in CBA.     

An integrated water/sediment approach to study plankton (a case study in the southern Adriatic Sea)

In marine coastal areas many planktonic species produce resting stages (cysts) that sink to the bottom. Integrated sampling from both the water column (to collect active stages), and sediments (to collect cysts), could be useful to achieve more complete information about plankton composition.In the framework of the “INTERREG II Albania-Italy Project” an oceanographic survey was carried out aboard the r/v “Italica” from 20 to 31 October 2000. The survey interested the northern Albanian coast (Gulf of Drin) and the northern Apulian coast (Gulf of Manfredonia) on the opposite sides of the South Adriatic Sea. The plankton was collected from 14 stations. A total of 188 categories were recognized in plankton samples. Among those categories, 130 species were recognized (87 of phytoplankton, 43 of microzooplankton), and only 53 (40.8%) resulted common to both the Adriatic sides. A total of 69 cyst morphotypes were recognized in sediment samples; 38 of them were classified at the level of species. A statistical analysis of the micro-zooplankton species abundance showed a segregation of the two areas better than that obtained with the phytoplankton. Cyst distribution in the sediments showed a good gulf-segregation too. In addition, they allowed us to find complementary information, particularly for dinoflagellates. The most abundant species in the water column were not equally dominant as resting stages in the sediments. Sediment sampling allowed further information about the composition of the plankton communities, and suggested us to search for a new method to enhance the yield of less abundant cysts.     

电动车组车体弯曲振动标准频率的保证

采用有限元法对电动车组车体的固有振动频率进行了计算.根据计算结果提出了改进电动车组车体结构的建议.     

Consumers’ attitudes towards electric cars: A case study of Hong Kong

The paper presents the results of a survey carried out in Hong Kong to gauge people’s attitudes towards the environmental aspects of electric cars. The survey shows that people in general recognise the positive environmental benefits of electric cars, but express concerns over their environmental costs, in particular those of battery waste and increased airborne pollutants emitted by power plants when the electricity is produced.     

市郊列车永磁同步牵引电动机成组驱动的可行性

无齿轮传动的永磁同步牵引电动机(PMSM)的寿命周期费用低于有齿轮传动装置的感应电动机.然而,通常一台PMSM电机需要一台逆变器.而在市郊列车上,一台逆变器最多可向4台感应电动机供电--这是感应电动机驱动的一个费用低的优势.作为减少逆变器数量的研究,文章探讨了一台逆变器供电给两台PMSM成组传动来减少逆变器数量的可行性.     

交通方式可达性差距——衡量交通可持续发展的指数

交通因其消耗大量能源而在可持续发展中扮演着重要角色,为了规划交通可持续发展,有必要提出能够评估和衡量交通可持续发展的指数。利用可达性概念和地理信息系统提出交通方式可达性差距指数。该指数由人口数量、就业岗位数、商店数以及学校数等决定,根据公共交通方式和私人交通方式间可达性指数差异计算。就能源效率而言,公共交通方式比私人交通方式更能实现可持续。可达性差距指数越高意味着可持续能力越强。通过比较香港1991年和1996年的可达性差距指数,来检验交通发展的可持续性是否有所提升。最后,讨论了如何运用可达性差距指数来检验土地利用以及交通发展政策和方案,以便确定更可持续的政策和方案。