On the estimation of trip matrices in the case of missing and uncertain data

The problem of missing data in the base (calibration) year is of major importance when applying the gravity model in transportation planning, because base year data are used for calibration of the model. In this article, this problem is tackled by solving an optimization problem for the prediction year for values of the entropy level and the proportions of trips in a given stratification of the cells of the trip matrix estimated in the base year. The problem of uncertain data in the prediction year is handled by replacing equality constraints for the marginal totals in the prediction year by interval constraints. Computational results are given for trip data from the Linköping area.     

Influence of nozzle hole diameter and orifice diameter on dme spray to get the similar heat value with diesel spray using the constant volume chamber

Low heating value (LHV) of di-methyl ether (DME) is lower than that of diesel. To get the similar heat value with diesel from the diesel engine operation, single injection quantity of DME should be increased. This investigation was tried to increase the injection quantity of DME by the modified diesel injector and investigated the penetration length and spray angle of DME spray. DME was injected by using three-type modified diesel injectors those nozzle-hole diameters (Injector 1: 1.66 mm, Injector 2 and 3: 0.25 mm) and orifice diameters were different (Injector 1 and 2: 0.6 mm, Injector 3: 1 mm). Spray characteristics of DME was investigated with a various ambient pressures (2.5, 5.0 MPa) in the constant volume chamber and a fuel was injected by varied injection pressure from 35 to 70 MPa by interval of 5 MPa using a DME common rail fuel injection system. The result shows that DME injection quantity by Injector 3 was 1.69 ~ 2.02 times larger than that of diesel injection quantity by Injector 1. In this case, DME spray got the similar heat value compared with diesel spray. The penetration speed of DME spray by Injector 3 was the fastest, thus when the spray development was end, the penetration length of DME spray by Injector 3 was the longest compared with the other cases. In case of the spray angle, Injector 2 and 3 had the similar spray angle and these were larger than that of diesel and DME sprays by Injector 1. As the result, Injector 3 was the solution for how to solve the low heating value of DME.     

Application of the Latching Control System on the Power Performance of a Wave Energy Converter Characterized by Gearbox,Flywheel, and Electrical Generator

The latching control represents an attractive alternative to increase the power absorption of wave energy converters (WECs) by tuning the phase of oscillator ve...     

Experimental study of drillship resistance performance in open and closed state of moonpool北大核心CSCD

[Objective] This paper carries out an experimental study of a multi-function dirllship model with moonpool structure in towing tank, aiming at analyzing the effects of the moonpool structure on the ship resistance in open and closure condition.[Methods]Taking a dirllship as the research object, the ship motion response in regular and irregular waves is investigated. The resistance of the ship in hydrostatic water and waves is measured with tension sensors, and the acceleration characteristics of the bow, midship and stern are analyzed by acceleration sensors.[Results]The results indicate that hull resistance under light load conditions is greater when open moonpool, while hydrostatic water resistance with closed moonpool is greater under design load conditions. The closed moonpool in regular waves reduces stern acceleration by 58.2%, bow resistance by 46.7% and heave response by 41.8%. The peak of resistance at the bow in irregular waves is about ten times higher than that at the stern, and the peak of resistance occurs more often when the moonpool is open at the same time.[Conclusions]The experimental study shows that the difference in load conditions changes the waterplane area and affects the hull resistance in hyrostatic water. In contrast, the closure of the moonpool not only reduces acceleration and resistance, but also improves surge and heave. As such, this paper can provide references for the structural design of drillships with moonpools. © 2023 Journal of Nanjing Agricultural University. All rights reserved.