The influence of variable message signs on en-route diversion between a toll highway and a free competing alternative

Transportation - In the field of road transport, Advanced Traveller Information Systems represent a relevant tool to manage road traffic, improve drivers’ utility and make a more efficient...     

���߽�ͨ���ź��Ż�����:�ع���ǰհ

概括地回顾了一些关于离线(或脱机)交通信号灯优化设计的方法.其中包括用于在孤立交叉口的单点和区域性的联动控制系统.离线方法在设计时一般利用已有调查出来的交通数据作为固定的输入资料，这个跟实时设计方法所要求的从感应器即时检浏出来的情况作为设计依据是有本质上的区别.但一般沿用的信号配时设计方法都需要依靠已刻在行车线道上(允许通行)的方向指示标志为设计基础，但这个方向指示在确定后在整个优化过程中是维持不变的，这就限制了交通流量在线道上的分布，从而大大减低配时的灵活性，在这样情况下优化出来的结果肯定不会是最好的.直至近期，以行车线道为基本单位的配时设计方法(英文名称为Lane-based method;中文可称为线道法)发展起来.这个方法是由传统的Phase-based method(相位法)所演变出来的.线道法不但包含所有相位法的特点，而且更能为原本受约束的线道和配时设计进行全面优化.线道法可在单点交叉口和区域性的联动控制系统上应用.文末提出一些未来研究发展的新方向.     

The influence of parents’ travel patterns,perceptions and residential self-selectivity to their children travel mode shares

Using the UK National Travel Survey from 2002 to 2006, this paper investigates the influence of households’ residential self-selectivity, parents’ perceptions on accessibilities and their travel patterns on their children daily travel mode share. In doing this, this study introduces a model structure that represents the complex interactions between the parents’ travel patterns, their perceptions on public transport services and their reported residential self-selectivity reasons and the children travel mode shares. This structure is analysed with structural equation modelling. The model estimation results show that parents’ residential self-selectivity, parents’ perceptions and satisfactions on accessibilities and their daily travel patterns significantly influence the children’s daily travel mode shares. However, the effects are not uniform across household members. This study has revealed that households’ residential self-selectivity behaviours have more correlations with the children’s non-motorised mode shares, whilst the parents’ perceptions and satisfactions on transport infrastructure and public transport service qualities have more correlations with parents’ mode shares. The results also confirm that parents’ non-motorised modes use in travelling is highly correlated with the children’s physically active travel mode shares. However, at the same time, the results also show that the effects of mothers’ car use to the children travel mode shares is more apparent than fathers’.     

Creating bus timetables with maximal synchronization

This paper addresses the problem of generating a timetable for a given network of buses so as to maximize their synchronization. It attempts to maximize the number of simultaneous bus arrivals at the connection (transfer) nodes of the network. Transit schedulers, taking into account the satisfaction and convenience of the system's users, appreciate the importance of creating a timetable with maximal synchronization, which enables the transfer of passengers from one route to another with minimum waiting time at the transfer nodes. In this paper, the problem is formulated as a mixed integer linear programming problem, and a heuristic algorithm is developed to solve the problem in polynomial time. The efficiency of this algorithm, compared to optimal solutions, is illustrated through a series of examples.     

Fault detection method for electric parking brake (EPB) systems with sensorless estimation using current ripples

A fault detection method with parity equations is proposed in this paper. Due to its low cost implementation, the velocity of the motor is not measurable in electric parking brake (EPB) systems. Therefore, residuals are not reliable when estimating the motor velocity with a low-resolution encoder. In this paper, we propose a fault detection method with sensorless estimation using current ripples that estimates the position and velocity of the motor by detecting periodical oscillations of the armature current caused by rotor slots. In addition, this method can estimate the position and velocity of the motor with less computational effort than a state observer. Moreover, the method is less sensitive to motor parameters than model-based estimation methods. The effectiveness of this method is validated with experimental data, and the simulation results show that various faults have their own residual patterns. Therefore, we can detect the presence of faults by monitoring the residual signals.     

Experimental study on the impact characteristics of a sandwich composite with an aluminum foam core

The need for composites has been increasing in various industries because composites have good mechanical properties for their weight and superior stiffness and strength. The composites addressed in this study were multi-pore aluminum foam with a specific gravity of 1/10 composed of solid aluminum metal. This composite has excellent impact energy-absorption capability. In this study, impact tests on an aluminum foam core sandwich composite with a porous core were conducted to examine its mechanical properties. The specimen was a sandwich structure with an aluminum foam core, and different impact energies, such as 50J, 70J, and 100J, were applied to the specimen. Consequently, a maximum load of 5.5 kN occurred when the striker penetrated the upper face sheet in all experiments. The maximum load occurred at 4.2 ms for 50J, 3.5 ms for 70J, and 3.0 ms for 100J, indicating that the greater the impact energy was, the shorter the time was until the maximum load. After the maximum load occurred, that is, after the penetration of the upper face sheet, the striker penetrated 10 mm further, causing the core to be damaged in the 50J test, while the lower face sheet remained intact. In the 70J test, the striker penetrated the core and caused damage to the upper face sheet at 10 ms. Finally, in the 100J test, the striker penetrated both the upper face sheet and core and even the lower face sheet at 10 ms. Given the result above, the maximum load occurred when the striker penetrated the upper face sheet and the sandwich composite with aluminum foam core; the load then gradually decreased and then rapidly increased when the striker reached the lower face sheet, and the maximum load lasted slightly longer than the time required for the upper face sheet to be penetrated.     

Use of GIS-Based Models for Integrating and Developing Marine Fish Cages within the Tourism Industry in Tenerife (Canary Islands)

Site selection is a key factor in any aquaculture operation, affecting both success and sustainability. Moreover, it can solve conflicts between different coastal activities, making a rational use of the coastal space. Geographical information systems (GIS) have become of increased significance for environmental planning and assessment mainly because of the need to compare a great number of spatially related data, and because it can be used to couple these spatial data with their attributes and overlay them. This study used GIS and related technology to build a spatial database using those criteria which were considered to have any influence in integrating marine fish-cage culture within the tourism industry in Tenerife. Criteria were grouped in three submodels (distance to beaches, nautical sports, and viewshed), which were combined to generate a final output showing the most suitable areas for cage culture development in coexistence with tourism. Most areas of the coastline of Tenerife were identified as being suitable (56%) or very suitable (46%), suggesting that marine cage aquaculture could be developed on the island in coexistence with the well-established tourism industry.     

A proposal for cost-related and market-oriented train running charges

This paper examines some key aspects of a charging system for promoting railway transport, including charges reflecting a clear relationship with costs (transparency) and charges reflecting the quality of the infrastructure manager's service. Train running charges recover track-related costs and can help to develop a charging system that meets these requirements. To orient train running charges to the market, a method for processing track maintenance and renewal costs is proposed whereby the quality of the service provided by an infrastructure is measured according to its utility to the railway undertaking. To achieve transparency, a single indicator is used for cost planning and the subsequent levying of costs on railway undertakings. The paper includes an example of how proposed train running charges would be calculated according to data from 14 European countries. The example shows that short-distance trains generate the lowest maintenance and renewal costs, followed by long-distance trains and freight trains.     

The impacts of household structure on the individual stochastic travel and out‐of‐home activity time budgets

The amount of time individuals and households spend in travelling and in out‐of‐door activities can be seen as a result of complex daily interactions between household members, influenced by opportunities and constraints, which vary from day to day. Extending the deterministic concept of travel time budget to a stochastic term and applying a stochastic frontier model to a dataset from the 2004 UK National Travel Survey, this study examines the hidden stochastic limit and the variations of the individual and household travel time and out‐of‐home activity duration—concepts associated with travel time budget. The results show that most individuals may not have reached the limit of their ability to travel and may still be able to spend further time in travel activities. The analysis of the model outcomes and distribution tests show that among a range of employment statuses, only full‐time workers' out‐of‐home time expenditure has reached its limit. Also observed is the effect of having children in the household: Children reduce the flexibility of hidden constraints of adult household members' out‐of‐home time, thus reducing their ability to be further engaged with out‐of‐home activities. Even when out‐of‐home trips are taken into account in the analysis, the model shows that the dependent children's in‐home responsibility reduces the ability of an individual to travel to and to be engaged with out‐of‐home activities. This study also suggests that, compared with the individual travel time spent, the individual out‐of‐home time expenditure may perform as a better budget indicator in drawing the constraints of individual space–time prisms. Copyright © 2013 John Wiley & Sons, Ltd.     

Repetitions in individual daily activity–travel–location patterns: a study using the Herfindahl–Hirschman Index

Using Herfindahl–Hirschman Index and the Mobidrive and Thurgau six-week travel diary datasets this paper examines the degree of repetition of individuals’ choices of their daily activity–travel–location combinations. The results show that the repetitiveness of individual activity–travel–mode–location combinations is highly influenced by the individuals’ out-of-home commitments, the intra-household conditions and the availability and the accessibility of the activity locations. Different types of activity have different pattern of repetition. The level of repetition of individual’s daily activity–travel pattern is less correlated to travel mode choice, but more to the individuals’ commitments and obligations. The repetitiveness of mode choices is more related to the conditions or the accessibilities of the activity location, but not directly to the activity itself.