Automatic calibration of fundamental diagram for first‐order macroscopic freeway traffic models

Despite its importance in macroscopic traffic flow modeling, comprehensive method for the calibration of fundamental diagram is very limited. Conventional empirical methods adopt a steady state analysis of the aggregate traffic data collected from measurement devices installed on a particular site without considering the traffic dynamics, which renders the simulation may not be adaptive to the variability of data. Nonetheless, determining the fundamental diagram for each detection site is often infeasible. To remedy these, this study presents an automatic calibration method to estimate the parameters of a fundamental diagram through a dynamic approach. Simulated flow from the cell transmission model is compared against the measured flow wherein an optimization merit is conducted to minimize the discrepancy between model‐generated data and real data. The empirical results prove that the proposed automatic calibration algorithm can significantly improve the accuracy of traffic state estimation by adapting to the variability of traffic data when compared with several existing methods under both recurrent and abnormal traffic conditions. Results also highlight the robustness of the proposed algorithm. The automatic calibration algorithm provides a powerful tool for model calibration when freeways are equipped with sparse detectors, new traffic surveillance systems lack of comprehensive traffic data, or the case that lots of detectors lose their effectiveness for aging systems. Furthermore, the proposed method is useful for off‐line model calibration under abnormal traffic conditions, for example, incident scenarios. Copyright © 2015 John Wiley & Sons, Ltd.     

Empirical assessment of urban traffic congestion

This paper presents an empirical assessment of urban traffic congestion in Central London, UK. Compared with freeways or motorways, urban networks are relatively less studied because of its complexity and availability of required traffic data. This paper introduces the use of automatic number plate recognition technology to analyze the characteristic of urban traffic congestion in Central London. We also present the use of linear regression to diagnose the observed congestion and attribute them to different causes. In particular, we distinguish the observed congestion into two main components: one due to recurrent factors and the other due to nonrecurrent factors. The methodologies are illustrated through a case study of Central London Area. It is found that about 15% of the observed congestion in the region is due to nonrecurrent factors such as accidents, roadwork, special events, and strikes. Given the significance of London, the study will be valuable for transport policy evaluation and appraisal in other global cities. Copyright © 2013 John Wiley & Sons, Ltd.     

Public responses to policies designed to internalise environmental and social externalities from road transport in New Zealand

Based on a public survey of registered voters, we explore four options for internalising the social and environmental costs of road transport. The options were presented together with generalised factual information about their benefits and costs. Respondents are highly supportive of fuel use efficiency standards and exhaust gas quality standards, with lesser support for proposed initiatives of road user charges and speed reduction. Demographic analysis of responses enables identification of those who might favour or oppose particular options. In this case women are identified as being strongly supportive of the speed reduction option.     

Panama Canal expansion: alleviating global climate change

This paper quantifies likely changes in greenhouse gas emissions which contribute to anthropogenic climate change, resulting from the expansion of the Panama Canal and the consequent increase in ship-borne commercial transportation from east Asia to the US east coast. Ocean transportation offers higher fuel economy and lower pollutant emissions compared with land transport. Additionally, truck and train transportation of cargo along the US land bridge threatens to overwhelm existing highway and rail systems and limit economic growth. The alternate transportation route for easterly transit of the Panama Canal will reduce overland traffic congestion and enhance economic development by maintaining freight flow efficiency.     

Application of the Latching Control System on the Power Performance of a Wave Energy Converter Characterized by Gearbox,Flywheel, and Electrical Generator

The latching control represents an attractive alternative to increase the power absorption of wave energy converters (WECs) by tuning the phase of oscillator ve...     

Influence of external restraint distribution on welding buckling of thin plate butt joint北大核心CSCD

［Objectives］It is easy to produce buckling distortion when welding thin plate butt joints, which affects the construction period, cost and performance, but this can be controlled by applying external restraints. ［Methods ］ First, a butt welding test of a thin plate under external restraints is carried out, and the out-of-plane deformation is measured by the optical surface scanning method. At the same time, finite element (FE) models in a free state and external restraint state are established, and the thermal mechanical phenomena of the two models are subjected to thermal-elastic-plastic FE analysis (TEP FE). The influence of different external restraint distributions on the welding buckling distortion of the joints is then studied, and reasons for controlling welding buckling distortion are analyzed from the perspective of longitudinal plastic strain and longitudinal contraction force.［Results ］ The out-of-plane deformation of the corresponding model is in good agreement with the measured results, and milder than the out-of-plane deformation of the model in a free state. When external restraints are applied, the longitudinal plastic strain of the weld and its adjacent metal decreases, and the longitudinal contraction force of the thin plate also decreases.［Conclusions ］ The results verify that external restraints can effectively control welding buckling distortion, and the control effects are different depending on the external restraint distribution. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Analysis on maneuvering motion characteristics of submarine under static moment in vertical plane北大核心CSCD

[Objectives]Aiming at the problem of poor depth-changing ability of the stern rudder of submarine at low speed, and the problem of reversing the movement trend is difficult when the stern rudder is stuck and encountering abrupt changes of seawater density in the vertical steering maneuver. This paper conducts the mechanism research of static moment maneuver. [Methods]First, it is proved through theoretical analysis that the static moment maneuver can eliminate the reversed velocity phenomenon of the stern rudder. Then, the surfacing process under the static moment maneuver and the rudder hydrodynamic control is numerically simulated. [Results]The simulation results show that the static moment maneuver can make the submarine maintain good vertical plane maneuverability at low speed, eliminate the reversed velocity phenomenon of the stern rudder, and avoid excessive trim angle of the submarine at high speed. At the same time, the recovery effect of the two emergency situations of rudder jamming and falling deep has been improved. [Conclusions]The static moment maneuver is beneficial to the maneuverability and safety of the submarine. The research in this article can provide a reference for the maneuverability design of submarine. © 2023 The Author(s).     

Numerical method of electromagnetic pulse response of conductor with complex load北大核心CSCD

[Objectives]Electromagnetic pulse can seriously affect and even destroy naval shipborne electronic information systems, weapons, equipment and so on. Due to the complexity of the antenna port load circuit, it is necessary to formulate a numerical method which can easily obtain the antenna load current. [Methods]The induced current of the terminal is obtained on the basis of the finite-difference time-domain (FDTD) and Holland model. According to the Thévenin equivalent circuit, the conductor is equivalent to the voltage source to realize decoupling between the conductor and load end, and the load circuit is solved using Simulink software.[Results]Compared with the traditional terminal model, this method is simple and feasible for high-order circuit processing. The effectiveness of the model is verified using non-linear elements and parallel capacitors and resistors as the load respectively. The results show that the calculation results of this method are consistent with those of the traditional methods. Finally, the antenna of the end-connected protect- or is calculated. The results show that the lead inductance caused by the installation of the protector is an important factor affecting the protection performance.[Conclusions]The method proposed in this paper can greatly reduce the simulation complexity of the coupling current of an antenna with a complex load, giving it useful reference value for the field of ship electromagnetic pulse protection design. © 2023 Editorial Department of Chinese Journal of Ship Research. All Rights Reserved.