潜艇操纵性多目标优化及灵敏度分析

以潜艇操纵面的几何尺度和纵向位置为设计变量,估算归一化后的无因次水动力系数,建立潜艇操纵性指标预报数学模型.基于iSIGHT优化平台,采取NCGA遗传算法开展潜艇操纵性指标的多目标优化设计,给出改进的优选方案,并进行灵敏度分析,评估操纵面参数对操纵性指标的影响.     

双通线加热的热力学及实验分析(英文)

The present investigation deals with process analysis of oxy-acetylene flame assisted double pass line heating for varying plate thickness. oxy-acetylene flame as the heat source for multi pass line heating to achieve 3-D bending of plates with varying thicknesses was studied. The oxy-acetylene flame was modeled as the moving heat source in the FEM analysis. The transient thermal histories were predicted taking into account the temperature dependent thermo-mechanical properties. A comparative study between single pass and double pass line heating residual deformation was also carried out. The temperature distribution and residual deformations predicted by the numerical model developed in the present work compared fairly well with those of the experimental ones.     

Minimum Efficient Scale (MES) and preferred scale of container terminals

The decision on the scale of a port terminal affects the terminal’s managerial, operational and competitive position in all the phases of its life. It also affects competition structures in the port in which the terminal is operating, and has a potential impact on other terminals. Port authorities and terminal operators need to know the scale of the terminal when engaging in concession agreements. In economic theory the scale of a plant/firm is typically defined in relation to the Minimum Efficient Scale (MES), the long-run output where the internal economies of scale are fully exploited. However, there are a number of theoretical and empirical indications that in ports the scale of a terminal is commonly guided by a combination of the MES and other determining factors. The “preferred” scale is the result of a complex interaction between the MES, the port governance framework and objectives, the market size and structure, technological change and operational considerations, physical and geographical limitations, and the business patterns of shipping lines. This study analyses the factors resulting in a preferred container terminal scale that in most of the times is different from the MES. The analysis of the technical, market-related and governance-related factors is supported by theoretical and empirical insights that illustrate the presence of a range of actual ”preferred” scales of terminal concessions that usually are different, below or above, MES.     

Estimation of road profile variability from measured vehicle responses

When assessing the statistical variability of fatigue loads acting throughout the life of a vehicle, the question of the variability of road roughness naturally arises, as both quantities are strongly related. For car manufacturers, gathering information on the environment in which vehicles evolve is a long and costly but necessary process to adapt their products to durability requirements. In the present paper, a data processing algorithm is proposed in order to estimate the road profiles covered by a given vehicle, from the dynamic responses measured on this vehicle. The algorithm based on Kalman filtering theory aims at solving a so-called inverse problem, in a stochastic framework. It is validated using experimental data obtained from simulations and real measurements. The proposed method is subsequently applied to extract valuable statistical information on road roughness from an existing load characterisation campaign carried out by Renault within one of its markets.     

The impact of job assignment rules for straddle carriers on the throughput of container terminals

Straddle carriers represent a critical resource in the handling of containers within a container terminal. It is essential that they are deployed in an as efficient manner as possible. The research presented in this paper is motivated by the need to critically evaluate job assignment rules for straddle carriers that operate in a multiple straddle environment. This is achieved by developing a discrete event simulation model using industrial simulation software to model a container terminal located in Melbourne, Australia. The model accounts for variables such as the number of straddle carriers needed, the speed of straddle carriers, the arrival rate of trucks, and the job assignment rule. A principal finding of the study is that increasing the number of straddles in the present set‐up from 6 to 7 has a negligible effect on daily throughput. However, an increase in the number of straddles to 7 is expected to have a profound effect on reducing the average waiting time of trucks within the terminal from over 16 minutes to under 9 minutes, a decrease of 46.5%. However, a further increase in the number of straddles results in no further increase in daily throughput. It was observed that the throughput of the terminal is very sensitive to the speeds at which straddles travel. The management of the terminal has proposed a new heuristic job assignment rule for straddles, because the present rule does not assign the jobs to straddles closest to the truck requesting to load or unload a container. As a result a new heuristic job assignment rule was tested. The simulation results revealed that both the old and new rules performed equally well using performance indicators such as average container flow time, daily throughput, average waiting time of jobs, number of jobs in the queue, and straddle utilisation. Therefore, the new rule will not improve these performance measures if implemented     

软开关变流器的稳态分析(一)

讨论软开关变流器的稳态分析.由于分别由软开关变流器的Lr-Cr单元和大的L-C滤波器单元决定的快、慢固有频率的共存,通过启动瞬态仿真程序寻找软开关变流器的稳态解可能会造成繁琐的计算和收敛失败.由于采用了基于暂态分析的换相检测技术和基于补偿原理的换相分析技术,文章所提出的数值法显示了高可靠性和快速收敛性.对两个直流变换器、一台逆变器和一台功率因数补偿装置作的稳态分析,突出显示了仿真算法的良好性能.     

生物法处理生活污水脱氮除磷效果分析

通过对铁道部无锡干部培训基地（以下简称培训基地）的生活污水的生物法处理效果观察，探析兼氧／好氧生物处理系统的脱氮除磷原理并对影响处理效果因素进行分析。     

Ports as elements in value-driven chain systems: the new paradigm

This paper argues that, with the rapid and pervasive restructuring of supply chains and of the logistics pathways in which ports are embedded, existing paradigms no longer offer adequate insights into the functions of ports or port authorities. Rather, ports must now be seen as elements in value-driven chain systems or in value chain constellations. They deliver value to shippers and to third party service providers; customer segmentation and targeting is on the basis of a clearly specified value proposition; and the port captures value for itself and for the chain in which it is embedded. The role of ports and port authorities, and the way in which they position themselves in the new business environments beyond 2001 must be defined within a paradigm of ports as elements in value-driven chain systems, not simply as places with particular, if complex, functions.     

Simulated responses of the Gulf of Mexico hypoxia to variations in climate and anthropogenic nutrient loading

A mathematical model was used to simulate monthly responses of the Gulf of Mexico hypoxia to variations in climate and anthropogenic nutrient loading over a 45-year period. We examined six hypothetical future scenarios that are based on observed and projected changes in the Mississippi River discharge, Mississippi River nitrate concentrations, and ambient water temperatures. In particular, we investigated the implications of a 30% decrease in the Mississippi River nitrogen flux, which was recently proposed by the Mississippi River Watershed/Gulf of Mexico Hypoxia Task Force as a measure to reduce the size of the hypoxic zone. Model simulations suggest that the frequency of hypoxia in the northern Gulf of Mexico is highly sensitive to variations in riverine nitrate flux, but also to variations in freshwater discharge and ambient water temperatures. A 30% decrease in the Mississippi River nitrate flux, for example, would reduce the frequency of hypoxia by 37%. Nevertheless, a 20% increase the Mississippi River discharge, which may occur under some climate change scenarios, would produce an increase in the frequency of hypoxia of the same magnitude. Thus, if the potential climatic variations are taken into account, a 30% decrease in the nitrogen flux of the Mississippi River may not be sufficient to accomplish the proposed hypoxia management goal.     

Fleet deployment optimization for liner shipping Part 1. Background, problem formulation and solution approaches

The background and the literature in liner fleet scheduling is reviewed and the objectives and assumptions of our approach are explained. We develop a detailed and realistic model for the estimation of the operating costs of liner ships on various routes, and present a linear programming formulation for the liner fleet deployment problem. Independent approaches for fixing both the service frequencies in the different routes and the speeds of the ships, are presented.