Reducing transit fleet emissions through vehicle retrofits,replacements, and usage changes over multiple time periods

Bus transit is often promoted as a green form of transportation, but surprisingly little research has been done on how to run transit systems in a green manner. Both vehicle task assignment and purchase models are generally constructed to minimize financial costs. Integrating vehicle task assignment with purchase decisions is made challenging by the different time scales involved. An integer programming approach is used to combine vehicle purchase, retrofit and aggregated task assignment decisions. The formulation is designed to operate in sequence with traditional vehicle task assignment models, to add emissions and long term financial cost elements to the objective, while maintaining computational tractability and feasible input data requirements. In a case study, a transit agency saves money in the long term by using stimulus money to buy CNG infrastructure instead of purchasing only new buses. Carbon prices up to $400/(ton CO₂ equivalent) do not change vehicle purchase decisions, but higher carbon prices can cause more diesel hybrid purchases, at a high marginal cost. Although the motivation and numerical case study are from the US transit industry, the model is formulated to be widely applicable to green fleet management in multiple contexts.     

Design process to minimize roof surface defects using a flexural function and Finite Element analysis

The appearance and exterior precision of passenger cars aesthetics has become an important factor in the automotive industry. During vehicle assembly, the curvature of the roof can change slightly and create cosmetic defects that affect the exterior appearance. The critical factor causing curvature change on the roof is the thermally driven expansion of an elastomer-based mastic sealer which is applied between the exterior roof panel and support rail during the frame assembly process. Therefore the expansion of the mastic sealer was modeled to predict the curvature change in the roof panel. In order to evaluate the causes and predict the curvature change quantitatively, a Finite Element (FE) simulation of the oven heating and mastic curing was performed. Validation of the simulation model was performed by comparing the local deformation and amount of the curvature change on the roof obtained from the actual process. In order to minimize the curvature change, the Taguchi method was used in conjunction with the FE model where a total of eight factors were chosen to perform a sensitivity analysis. In order to exclude the deformation due to residual stress resulting from the oven process, it was selected as a noise factor. Response was taken as the maximum curvature change calculated by a flexural function which was used to distinguish absolute curvature that is not affected by the horizontal or vertical movement of roof panel. A total of 18 cases were analyzed with length of each sealer, pitch of sealer, and rail location being identified as the most influential factors affecting the curvature change. Using the optimum values, the amount of curvature change in the roof panel was reduced by 12 percent.     

刺桐基督教与摩尼教遗迹概述

刺桐(泉州)是中世纪各大宗教之家,有着丰富的宗教遗存,其中以石刻为多,引起中外学者的浓厚兴趣。澳大利亚研究团多次造访泉州,对泉州的宗教石刻(主要是基督教石刻)进行详尽的考证。研究团成员刘南强教授首先对泉州宗教石刻存在的历史背景和收藏保护情况做了简要概述,重点介绍访问的成果主要是碑文的解读与译释情况。     

Real-time implementation of a traction control algorithm on a scaled roller rig

Traction control is a very important aspect in railway vehicle dynamics. Its optimisation allows improvement of the performance of a locomotive by working close to the limit of adhesion. On the other hand, in case the adhesion limit is surpassed, the wheels are subjected to heavy wear and there is also a big risk that vibrations in the traction occur. Similar considerations can be made in the case of braking. The development and optimisation of a traction/braking control algorithm is a complex activity, because it is usually performed on a real vehicle on the track, where many uncertainties are present due to environmental conditions and vehicle characteristics. This work shows the use of a scaled roller rig to develop and optimise a traction control algorithm on a single wheelset. Measurements performed on the wheelset are used to estimate the optimal adhesion forces by means of a wheel/rail contact algorithm executed in real time. This allows application of the optimal adhesion force.     

具有惯性表面的两层流体的柯西-泊松问题(英文)

This paper is concerned with the generation of waves due to initial disturbances at the upper surface of a two-layer fluid, as the upper layer is covered by an inertial surface and the lower layer extends infinitely downwards. The inertial surface is composed of thin but uniform distribution of non-interacting material. In the mathematical analysis, the Fourier and Laplace transform techniques have been utilized to obtain the depressions of the inertial surface and the interface in the form of infinite integrals. For initial disturbances concentrated at a point, the inertial surface depression and the interface depression are evaluated asymptotically for large time and distance by using the method of stationary phase. They are also depicted graphically for two types of initial disturbances and appropriate conclusions are made.     

Collaborative Management of Natural Resources in San Diego Bay

This article presents the results of a three-year effort at applying information technology to the problem of collaborative natural resource management in San Diego Bay. As such, it represents an approach to integrated coastal zone management (ICZM). This effort resulted from a collaboration between the San Diego Supercomputer Center at the University of California, San Diego and the San Diego Bay Interagency Water Quality Panel for the purpose of (1) developing an environmental data repository to facilitate the acquisition and sharing of data and (2) the development of a visual model of the bay in support of the development of a comprehensive, coordinated management plan for San Diego Bay. It was determined from this study that information technology is an important and key component to ICZM but that sociopolitical factors may override the benefits of decision-support systems and should be considered at the outset of any project of this kind.     

Examining the Political and Practical Reality of Bus-based Real Time Passenger Information

Abstract

Enhancing the bus experience through improved information provision is a key element of UK Government transport policy. Real time passenger information (RTPI) is perceived to reassure waiting passengers, to benefit the bus operator through increased revenue and the local authority, by promoting social inclusion and achieving a modal shift. RTPI also provides an important tool for operators by allowing them to monitor services and refine their schedules.

The aim of this paper is to understand the reasons for implementing RTPI in the bus sector, and to determine the key issues impacting on the likely success of such a policy. A case study approach investigates the experiences of two provincial towns in the UK. The paper suggests that, whilst it is unclear whether RTPI has resulted in an increase in bus patronage, it is considered to be most effective when combined as part of a package of measures. It is intended that the findings from the two case studies will reveal lessons of relevance to authorities contemplating the introduction of RTPI.     

Simulation of flow in diesel particulate filter system using metal fiber filter media

Metal fiber is introduced as a new filter media in wall-flow Diesel Particulate Filter (DPF) system. This technology has high temperature durability which is required for filter regeneration, and can maintain the mechanical strength even in the extreme exhaust-related vibrations of vehicles. However, the regeneration near the wall (outer layer) is more difficult because of the heat loss and reduced gas flow near the wall. In this study, a flow is simulated to determine the flow control method for the more uniform flow in all filter layer. By using Star CCM+ commercial software, we obtain local velocity, streamline, and pressure distributions in the filter, which are typically difficult to obtain from measurements. The major control factors are the filter porosity, size and location of the distribution plate, and the number of blades of the swirler. By placing the distribution plate in front of the filter, the flow velocity near the wall was increased. The optimum location and size of the flat plate were chosen. By attaching the blade on the plate the flow velocity near the wall was increased more. Therefore, the regeneration efficiency is increased by using the swirler-type metal fiber DPF system.     

Finite element analysis of overlay incorporating stress absorbing membrane interlayers against reflective cracking

A wheel tracking test was modelled to gain better understanding of the deflection and stress-strain distribution in an overlaid cracked pavements with and without membrane interlayer （SAMI）. For this purpose, commercial finite element software Abaqus 6.7-1 was used. Two different models were considered, one incorporating stress absorbing membrane interlayers （SAMIs） and the other without SAMI. In the study, full bond condition was assumed for the boundaries between the layers, and a linear elastic model was used for the analysis. The results show that introduction of SAMI caused greater deflection of the pavement. It is found that although with SAMIs, low stiffness is required, a very low stiffness may yield undesirable results. The results show that the introduction of SAMIs results in high strain concentration around the crack region, whilst the strain in the overlay is smaller than the values predicted in the models without SAMIs.     

A study of jack-up leg drag coefficients

The accurate prediction of drag coefficients for truss-type jack-up legs is an important part of a unit's design. Over the past 14 years, a series of windtunnel tests have been conducted on both square and triangular cross-section leg configurations. A calculation method which closely fits the model test data has also been adopted. A previous paper described the early testing and the MMEC calculation method for square legs. Since then, testing and research have continued on both square and triangular leg designs. This paper describes the more recent testing performed on square legs, and it details the testing and the MMEC method for triangular legs. In addition, the effects of cornerpost design and surface roughness are discussed. Several example calculations are provided in Appendices.