Investigation of pitch motion portion in vertical response at sides of a Tension-Leg Platform

Tendons vertically moor Tension-Leg Platforms (TLPs), thus, a deep understanding of physical tendon stresses requires the determination of the total axial deformation of the tendons, which is a combination of the heave, pitch, and surging responses. The vertical motion of the lateral sides of the TLP is coupled with surge and constitutes a portion of the pitch motion. Tendons are connected to the sides of the TLP; hence, the total displacement of the lateral sides is related to the total deformation of the tendons and the total axial stress. Therefore, investigating the total vertical response at the sides of the TLP is essential. The coupling between various degrees of freedom is not considered in the Response Amplitude Operator (RAO). Therefore, in frequency domain analysis, the estimated vertical RAO is incomplete. Also, in the time domain, only the heave motion at the center of TLP is typically studied; this problem needs to be addressed. In this paper, we investigate the portion of the pitch motion in the vertical response at the sides of the TLP in both the frequency and time domains. Numerical results demonstrate a significant effect of the pitch motion in the vertical motion of the edges of the TLP in some period ranges.     

KG<Subscript>max</Subscript> curves associated with second generation intact stability criteria for different types of ships

Currently, second generation intact stability criteria are being developed and evaluated by the International Maritime Organization (IMO). In this paper, we briefly present levels 1 and 2 assessment methods for the criteria of pure loss of stability and parametric roll failure modes. Subsequently, we show the KG_max curves associated with these criteria. We compute these curves for five different types of ships and compare them with the curves embodied in the current regulations. The results show that the safety margin ensured by the first level-1 method of calculation for both pure loss of stability and parametric roll seems to be excessive in many cases. They also show that the KG_max given by the second level-1 method and by the level-2 method may be very similar. In some cases, the level-2 method can be more conservative than the second level-1 method, which is unanticipated by the future regulation. The KG_max curves associated with parametric roll confirm that the C11 container ship is vulnerable to this failure mode. The computation of the second check coefficient of parametric roll level 2 (C2) for all possible values of KG reveals the existence of both authorized and restricted areas on the surface formed by both the draft and KG, which may replace the classical KG_max curves. In consequence, it is not sufficient to check that C2 is lower than the maximum authorized value (R _PR0) for a fixed ship’s loading condition.     

Effects of a classroom-based bridge resource management training on knowledge,attitudes, behaviour and performance of junior naval officers

This study asses the effectiveness of classroom-based bridge resource management (BRM) training for junior naval officers, in which general principles of human behaviour and performance in teams and under stress were conveyed. Although BRM training is recommended by the International Maritime Organization and is increasingly common in seafaring, very little is known about whether the adaptation of crew resource management (CRM) training from aviation to the maritime domain has been successful and what type of training is effective. A study with a quasi-experimental, two-factorial mixed design was conducted with BRM training as the between factor and time as the within factor. For 117 study participants, evaluation criteria were assessed on all levels as defined by Kirkpatrick (Train Dev J, 178–192 1979): subjective training evaluation, knowledge, attitudes and behaviour as well as performance while commanding a vessel during a real-world exercise. BRM participants showed better subjective training evaluations and more BRM-related knowledge than controls. Training did not produce differences between groups regarding BRM-related attitudes, the demonstration of non-technical skills or the overall success in the real-world exercise. Overall, BRM training effectiveness was rather low, which can most probably be attributed to the focus of training on generalizable knowledge, skills and attitudes at the expense of their specific application to the context of the real-world exercise. In the design of BRM and CRM training courses alike, the effective application of general principles to a given context must be defined, and the application must be emphasised during training delivery.     

Propeller torque load and propeller shaft torque response correlation during ice-propeller interaction

Ships use propulsion machinery systems to create directional thrust. Sailing in ice-covered waters involves the breaking of ice pieces and their submergence as the ship hull advances. Sometimes, submerged ice pieces interact with the propeller and cause irregular fluctuations of the torque load. As a result, the propeller and engine dynamics become imbalanced, and energy propagates through the propulsion machinery system until equilibrium is reached. In such imbalanced situations, the measured propeller shaft torque response is not equal to the propeller torque. Therefore, in this work, the overall system response is simulated under the ice-related torque load using the Bond graph model. The energy difference between the propeller and propeller shaft is estimated and related to their corresponding mechanical energy. Additionally, the mechanical energy is distributed among modes. Based on the distribution, kinetic and potential energy are important for the correlation between propeller torque and propeller shaft response.     

Characteristic analysis of underwater acoustic scattering echoes in the wavelet transform domain

Underwater acoustic scattering echoes have time–space structures and are aliasing in time and frequency domains. Different series of echoes properties are not identified when incident angle is unknown. This article investigates variations in target echoes of monostatic sonar to address this problem. The mother wavelet with similar structures has been proposed on the basis of preprocessing signal waveform using matched filter, and the theoretical expressions between delay factor and incident angle are derived in the wavelet domain. Analysis of simulation data and experimental results in free-field pool show that this method can effectively separate geometrical scattering components of target echoes. The time delay estimation obtained from geometrical echoes at a single angle is consistent with target geometrical features, which provides a basis for object recognition without angle information. The findings provide valuable insights for analyzing elastic scattering echoes in actual ocean environment.     

Resistance analysis of a semi-SWATH design concept in shallow water

Resistance analysis is an important analytical method used to evaluate the hydrodynamic performance of High Speed Craft (HSC). Analysis of multihull resistance in shallow water is essential to the performance evaluation of any type of HSC. Ships operating in shallow water experience increases in resistance because of changes in pressure distribution and wave pattern. In this paper, the shallow water performance of an HSC design concept, the semi-Small Waterplane Area Twin Hull (semi-SWATH) form, is studied. The hull is installed with fin stabilizers to reduce dynamic motion effects, and the resistance components of the hull, hull trim condition, and maximum wave amplitude around the hull are determined via calm water resistance tests in shallow water. These criteria are important in analyzing semi-SWATH resistance in shallow water and its relation to flow around hull. The fore fin angle is fixed to zero degrees, while the aft fin angle is varied to 0°, 5°, 10°, and 15°. For each configuration, investigations are conducted with depth Froude numbers (Fr _H ) ranging from 0.65 to 1.2, and the resistance tests are performed in shallow water at the towing tank of UTM. Analysis results indicate that the resistance, wave pattern, and trim of the semi-SWATH hull form are affected by the fin angle. The resistance is amplified whereas the trim and sinkage are reduced as the fin angle increases. Increases in fin angle contribute to seakeeping and stability but affect the hull resistance of HSCs.     

Simulators in bridge operations training and assessment: a systematic review and qualitative synthesis

This article presents a systematic review and qualitative synthesis of the use of simulators in maritime education and training (MET), with a focus on bridge operations during navigation training and assessment. The review found 34 articles published in a wide range of academic journals, displaying a global field of research consisting of three main disciplines: Maritime professionals (n = 15), Human factors (n = 13) and Education (n = 6). An important conclusion made after synthesising the results of the studies is that while the potential of using simulators in training and assessment are clear, little is known about which instructional practices would ensure valid and reliable results of simulator-based education. Since MET institutions train their students for one of the most safety-critical industries in the world, there is a need for empirical studies that explore the use of simulator-based training and assessment further to lay the foundation for an evidence-based educational practice.     

Developing a marine engineering centre of excellence for competency-based training

Institutes imparting training in marine engineering require replication of shipboard ambience for strengthening the competencies. For building an engineering centre for training, five options at different physical levels were considered based on a model of a new liquefied natural gas tanker ship build. A mock-up facility, simulator, full-scale engine room, scaled down version and a combination arrangement with live and dummy equipment were the options. Analytic hierarchy process was applied for selecting a suitable option based on criteria of cost, effectiveness in attaining competencies, practicability and environmental conduciveness. Analyses were carried out on the eigenvalues based on eight subselection criteria. The combination of live equipment (boilers and turbo alternator) and non-live shipboard equipment (auxiliaries) was chosen based on the global weightages obtained from the pairwise comparison matrix computations. The reliability was ascertained from the consistency index which was less than 0.1. For selection of the learning modes and the equipment, a constructivist approach of learners reflecting and choosing the learning mode was adopted. Industry practitioners were made into learner groups composed of trainers, shipboard personnel and company personnel. Established competencies were assigned as scores to the different learning modes. ANOVA application and statistical methods were used to analyse the scores to verify if there were too much variation in the choices. The calculated F ratio values were low (0.14 to 0.40) compared to the reference values indicating that the choices were even. The chi-squared test indicated that the group composition did have an influence on choosing the learning mode and equipment for training. The objective of identifying the learning mode and equipment for the training centre was achieved.     

Research on techniques to improve accuracy in SBL locating systems

Short baseline system （SBL）, which is a kind of underwater acoustic locating technology, has widely applicable value. In order to examine the capability of ship model design, the ship model experimentation should have high accuracy. This paper focuses on the key techniques of high accuracy locating system, including high accuracy sub-array position emendation, divisional locating, anti multi-path interference measure, etc. Experiments show that the SBL locating systems has received the satisfying effect owing to these key techniques proposed in this paper.     

Analyzing the dispersion of cargo vapors around a ship’s superstructure by means of wind tunnel experiments

In a previous study, it was found that cargo tank operations like cleaning and venting, lead to higher cargo vapor concentrations around the ship’s superstructure. Can wind tunnel experiments confirm these findings? Is there an improvement when using higher outlets at high velocities compared to lower outlets with a low outlet velocity? Is there a relation between relative wind speed and measured concentration? These questions were investigated in the Peutz wind tunnel. By using a tracer gas for the wind tunnel experiments, concentration coefficients have been calculated for various settings. The study shows that using high-velocity outlets is an efficient way to keep concentrations as low as possible. The only exception is for relative wind directions from the bow. In this last case using a manhole as ventilation outlet leads to lower concentrations. With increasing wind speeds the building downwash effect resulted in higher concentration coefficients near the main deck. This study confirms our on-board measurements and suggests the lowering of the ventilation inlet of the accommodation, so that the high-velocity outlet can be used safely at all times.