A tool to aid redesign of flexible transport services to increase efficiency in rural transport service provision

Rural areas generally have lower and more dispersed demands for travel which cannot sustain conventional public transport services and consequently have a greater number of flexible and demand responsive transport services operating. These services usually operate on a stand-alone basis, are often subsidized and are typically only accessible by certain passenger types or for specific trip purposes. This generally results in uncoordinated and inefficient transport provision overall. The Flexible integrated transport services (FITS) system featured in this paper has been designed to address this problem. FITS can be used as a planning tool to assess potential benefits from relaxing operating constraints (e.g., a service's operating boundaries), which can potentially suggest service redesign. It also includes the capacity to assign subsidy payments on a trip by trip basis to increase cost efficiency whilst meeting a greater proportion of transport needs. The case study in the paper focusses on transport to health in the Aberdeenshire and Morayshire areas of Scotland in the UK. Despite flexible transport operators receiving public funds to meet passenger needs, this is currently being supplemented by public bodies paying large amounts in taxi fares in instances where there is a statutory obligation to provide travel but where no other suitable transport service exists. The results demonstrate the potential substantial savings which could be realized by allowing transport operators to redesign their services by relaxing constraints and by the reassignment of subsidies: resulting in more passenger demands being met and a reduction in public spending on taxi fares.     

Improvement of exhaust gas pressure’s utilization for compressing the intake air in diesel engine’s cylinders

In order to improve the economical and environmental performances of the Diesel engines, the present paper aims to bring to the forefront solutions to increase the efficiency of the supercharging process carried out by the aggregates with Comprex type pressure waves. One solution to this is to drive the Comprex, not by the supercharged engine as it currently happens, but by a DC motor. The speed of the electric motor is modified, by means of an electronic management system, depending on the speed and load of the Diesel engine. The paper presents the experimental results obtained during the investigation of a supercharged Diesel engine by the Comprex driven type according to the proposed solution.     

Perspectives on railway track geometry condition monitoring from in-service railway vehicles

This paper presents a view of the current state of monitoring track geometry condition from in-service vehicles. It considers technology used to provide condition monitoring; some issues of processing and the determination of location; how things have evolved over the past decade; and what is being, or could/should be done in future research. Monitoring railway track geometry from an in-service vehicle is an attractive proposition that has become a reality in the past decade. However, this is only the beginning. Seeing the same track over and over again provides an opportunity for observing track geometry degradation that can potentially be used to inform maintenance decisions. Furthermore, it is possible to extend the use of track condition information to identify if maintenance is effective, and to monitor the degradation of individual faults such as dipped joints. There are full unattended track geometry measurement systems running on in-service vehicles in the UK and elsewhere around the world, feeding their geometry measurements into large databases. These data can be retrieved, but little is currently done with the data other than the generation of reports of track geometry that exceeds predefined thresholds. There are examples of simpler systems that measure some track geometry parameters more or less directly and accurately, but forego parameters such as gauge. Additionally, there are experimental systems that use mathematics and models to infer track geometry using data from sensors placed on an in-service vehicle. Finally, there are systems that do not claim to measure track geometry, but monitor some other quantity such as ride quality or bogie acceleration to infer poor track geometry without explicitly measuring it.     

桥墩防落石碰撞柔性设计方法及分析

基于动力学基本原理,从非线性、接触以及本构关系计算理论建立落石-桥墩防撞物柔性碰撞精细化计算模型,并对关键计算参数给出建议取值.利用钢结构柔性变形吸收落石碰撞能量,提出一种桥墩防落石碰撞柔性设计方法,并详细给出该防落石碰撞构造措施的结构组成形式.利用ANSYS/LS-DYNA动力分析计算程序,考虑几何、材料双重非线性,精细化数值仿真计算落石撞击防撞物的动态全过程,以一个偏安全的极限碰撞状态,分别从运动行为(撞击力、位移、速度、加速度)以及能量转换(系统动能、系统变形能)角度进行计算结果与数据分析,证明所提出的柔性防撞设计思路以及防撞措施的合理性与优越性.     

USS Boone (FFG 28) Emergent Underwater Rudder Replacement

On November 30, 2006, USS Boone (FFG 28) lost all steering control in the Mediterranean Sea due to a lost rudder. Within hours of the casualty, numerous US Navy and contractor activities sprung into action to coordinate and complete an emergent voyage repair to return USS Boone to service to support the Global War on Terrorism. The Navy faced a large hurdle to identify and transport a replacement rudder to Rota, Spain, and prepare and carry out an extremely complex repair procedure. Pearl Harbor Naval Shipyard personnel removed the replacement rudder from USS Crommelin (FFG 37) in Pearl Harbor Naval Shipyard and transported the rudder to Rota, Spain. The Navy's Supervisor of Salvage and Diving developed the repair procedure and coordinated the repair operation, which involved over 30 US Navy and contractor divers. The repair team completed the rudder replacement on December 28, 2006 and returned USS Boone to underway operations.     

Error quantification of a high-resolution coupled hydrodynamic-ecosystem coastal-ocean model: Part 2. Chlorophyll-a, nutrients and SPM

Marine systems models are becoming increasingly complex and sophisticated, but far too little attention has been paid to model errors and the extent to which model outputs actually relate to ecosystem processes. Here we describe the application of summary error statistics to a complex 3D model (POLCOMS-ERSEM) run for the period 1988–1989 in the southern North Sea utilising information from the North Sea Project, which collected a wealth of observational data. We demonstrate that to understand model data misfit and the mechanisms creating errors, we need to use a hierarchy of techniques, including simple correlations, model bias, model efficiency, binary discriminator analysis and the distribution of model errors to assess model errors spatially and temporally. We also demonstrate that a linear cost function is an inappropriate measure of misfit. This analysis indicates that the model has some skill for all variables analysed. A summary plot of model performance indicates that model performance deteriorates as we move through the ecosystem from the physics, to the nutrients and plankton.     

160 km/h高速货车转向架的研制

根据高速货车转向架的运用要求和运用条件,确定了160km/h高速货车转向架的主要技术参数;提出了整体焊接构架式有摇枕转向架的结构形式,介绍了其主体结构情况;结合转向架静强度和疲劳试验、线路动力学试验结果,得出了转向架设计是较为成功的结论。     

Hybrid neural network model for history-dependent automotive shock absorbers

The method of numerical multi-body simulation is an often used and well-understood development tool in the automotive industry. In order to reproduce the ride comfort or handling behaviour of vehicles, mathematical models have to be built up. To achieve accurate simulation results, highly detailed component models are required. However, the formulation of appropriate physically-based model equations of complex automotive components (e.g. air springs, shock absorbers, rubber bearings, tyres, etc.) can be very difficult. To handle this, empirical modelling methods have been developed. Simple algebraic equations are used to describe complex system behaviour. This simplification is very effective, although it largely ignores the natural laws of mechanics and thermodynamics but is still capable to predict the component response. This article illustrates how to take advantage of this approach in numerical simulations. We describe the development of a hybrid automotive shock absorber model based on both spline and neural network (NN) approaches. By combining these different approaches, an accurate model is achieved without loss of variability. Non-isothermal laboratory force-displacement measurements of an automotive shock absorber are being used to estimate the parameters of the NN. As shown, the model replicates the measured data with sufficient accuracy, especially the hysteresis. Finally, we present a set of quarter-car simulations with a built-in hybrid NN shock absorber.     

Logistical restructuring and road freight traffic growth

The forecasting of road freight traffic has relied heavily on the close correlation between GDP and road tonne-kilometers. It has not been rooted in an understanding of the causes of freight traffic growth. The research reported in this paper has investigated this process of traffic growth in two ways: first, by analysing official data on the production, consumption and movement of food and drink products, and second, by conducting a survey of the changing freight transport requirements of 88 large British-based manufacturers.The analysis of secondary data shows how, in the food and drink sector, the relationship between the real value of output and road vehicle-kms hinges on four key parameters: value density, handling factor, average length of haul and consignment size. An attempt is made to explain variations in these parameters.The survey of manufacturers suggests that the growth of lorry traffic is the net result of a complex interaction between factors operating at four levels of logistical management: strategic planning of logistical systems, choice of suppliers and distributors, scheduling of product flow and the management of transport resources. Changes in the frequency and scheduling of freight deliveries in response to tightening customer service requirements and just-in-time management appear to have become a more prevalent cause of freight traffic growth than the physical restructuring of logistical systems. Manufacturers anticipate that their road freight demand will broadly increase in line with sales and be largely unaffected by road transport cost increases at the levels currently proposed. The paper concludes by examining their likely reactions to a much sharper increase in the cost of road freight movement.