Effectiveness of travel time reliability indicators in the light of the assessment of dynamic managed lane strategy

ABSTRACT

The aim of traffic management is to ensure a high quality of service for a maximum number of users by decreasing congestion and increasing safety. Uncertainty of travel times decreases the quality of service and leads end users to modify their plans regardless of the average travel time. Indicators describing travel time reliability are being developed and should be used in the future both for the optimization and for the assessment of active traffic management operations. This article discusses the efficiency of certain reliability indicators in an ex-post assessment of a traffic management strategy. Ex-post assessment is based on an observational before–after study. As some factors other than the studied management strategy may intervene between the two periods, and as most reliability indicators require knowledge of the full travel time distribution and not only its average, a methodology is developed for the identification of the impact of these exogenous factors on the whole distribution. Many reliability indicators are split into different parts allowing the identification of the part due to the management strategy impact. The methodology is tested numerically on a managed lane operation consisting of Hard Shoulder Running (HSR) at rush hour on a section of a French motorway. The variation of some reliability indicators appears misleading, whereas the splitting of the indicators increases our understanding of the strategy and highlights its impact. The paper gives the reliability assessment of the HSR field test and discusses different reliability indicators to identify their potential performances and shortcomings.     

Effect of nozzle orifice diameter on diesel spray tip penetration according to various spray models for CFD simulation with widely varying back pressure

CFD simulations of spray tip penetration with the standard KIVA3V, ‘original gas jet’ and ‘Normal gas jet profile with breakup length formula’ (NGJBL) spray models were performed to investigate the effects of nozzle orifice size and ambient gas density combinations on the spray penetration. The accuracy of the CFD simulation results was estimated by comparing them with available experimental data. The ambient gas density was varied in 12 kg/m³ intervals from 12 to 69 kg/m³ for each nozzle orifice diameter. The nozzle orifice diameters used were 119, 140, 183 and 206 mm. A total of 20 cases in the CFD simulations were considered with combinations of the 4 nozzle orifice diameters and 5 ambient gas densities. CFD simulations with the NGJBL spray model were more accurate than those with either the standard KIVA3V or gas jet spray models as the nozzle orifice diameter and ambient gas density was increased. The NGJBL and original gas jet model is more effective in predicting the spray tip penetration near the nozzle tip region.     

Vibration reduction of H/Shaft using an electromagnetic damper with mode change

The objective of this study is to develop a damper that can reduce the amplitude of vibration in various frequency ranges. Previous H/Shaft vibration reduction methods work in a passive way. A dynamic damper reduces the amplitude of vibration at its first mode, but vibration still appears at the second mode. A mass damper or hollow shaft can shift the natural frequency to a lower or higher region. The fixed operating frequency prevents vibration from being reduced outside the operating frequency range. The proposed damper uses electromagnets as either masses or actuators to change the damper mode between dynamic damper mode and mass damper mode. The electromagnetic damper (EMD) can change its mode to respond to the vibration excitation at both low and high frequencies. The vibration reduction performance was evaluated by FRF tests in laboratory and vehicle conditions. The results were compared with those of a dynamic damper and indicate that the amplitude of vibration is reduced by 95.6 % when the EMD is implemented on an H/Shaft, whereas only 61.9 % vibration reduction is achieved by the dynamic damper.     

Insights into vehicle trajectories at the handling limits: analysing open data from race car drivers

Race car drivers can offer insights into vehicle control during extreme manoeuvres; however, little data from race teams is publicly available for analysis. The Revs Program at Stanford has built a collection of vehicle dynamics data acquired from vintage race cars during live racing events with the intent of making this database publicly available for future analysis. This paper discusses the data acquisition, post-processing, and storage methods used to generate the database. An analysis of available data quantifies the repeatability of professional race car driver performance by examining the statistical dispersion of their driven paths. Certain map features, such as sections with high path curvature, consistently corresponded to local minima in path dispersion, quantifying the qualitative concept that drivers anchor their racing lines at specific locations around the track. A case study explores how two professional drivers employ distinct driving styles to achieve similar lap times, supporting the idea that driving at the limits allows a family of solutions in terms of paths and speed that can be adapted based on specific spatial, temporal, or other constraints and objectives.     

山区峡谷非均匀风场下大跨度斜拉桥静风稳定性分析

为研究山区峡谷地形下非均匀风场对大跨度桥梁静风稳定性的影响,以一座跨越典型山区峡谷地形的大跨度斜拉桥为工程背景,首先,采用计算流体动力学（CFD）软件Fluent对桥址区地形的风场特性进行分析,计算出沿主梁方向的非均匀风速和非均匀风攻角分布;然后,采用ANSYS APDL技术实现能考虑非均匀风速和非均匀风攻角下大桥静风稳定性的非线性分析方法。在此基础上,综合考察非均匀风攻角分布、非均匀风速分布、非均匀风速非均匀风攻角分布等风场条件对大桥静风稳定性的影响,分析各工况下主梁的静风变形与跨中处拉索刚度变化。研究结果表明：与均匀风场条件下的静风响应不同,非均匀风攻角或非均匀风速下主梁静风响应最大值点位于风荷载峰值点与跨中之间,在针对非均匀风场下大桥的静风稳定性分析时,应更注重静风响应最大值点而不是跨中处;非均匀风攻角下大桥的静风失稳临界风速要远低于均匀风攻角的静风失稳临界风速,且其静风稳定性能主要受最大风攻角而不是主跨部分非均匀风攻角的平均值来控制;非均匀风速下大桥的静风失稳临界风速主要由主跨部分的风速平均值和最大值共同影响;主梁的竖向位移和扭转角形状主要由风攻角因素来控制,而横向位移的变化规律相对较独立,其形状基本上以跨中线对称,且其值主要由风速因素来决定。     

Prediction of travel time variability for cost-benefit analysis

Unreliable travel times cause substantial costs to travelers. Nevertheless, they are often not taken into account in cost-benefit analyses (CBA), or only in very rough ways. This paper aims at providing simple rules to predict variability, based on travel time data from Dutch highways. Two different concepts of travel time variability are used, which differ in their assumptions on information availability to drivers. The first measure is based on the assumption that, for a given road link and given time of day, the expected travel time is constant across all working days (rough information: RI). In the second case, expected travel times are assumed to reflect day-specific factors such as weather conditions or weekdays (fine information: FI). For both definitions of variability, we find that the mean travel time is a good predictor. On average, longer delays are associated with higher variability. However, the derivative of variability with respect to delays is decreasing in delays. It can be shown that this result relates to differences in the relative shares of observed traffic ‘regimes’ (free-flow, congested, hyper-congested) in the mean delay. For most CBAs, no information on the relative shares of the traffic regimes is available. A non-linear model based on mean travel times can then be used as an approximation.     

Traffic noise abatement: How different pavements, vehicle speeds and traffic densities affect annoyance levels

In this paper, annoyance ratings from traffic noise recorded on cobblestones, dense asphalt, and open asphalt rubber pavements are assessed with regard to car speeds and traffic densities. It was found that cobblestones pavements are the most annoying; also while open asphalt rubber pavement imposes less annoyance than dense asphalt it is not significantly different. Higher car speeds always lead to greater annoyance, as does higher traffic densities. LAeq and LAmax correlate well with annoyance, but loudness is the best predictor. Roughness and sharpness exhibit inconsistent interactions.     

CFD Analysis of Ship-to-Ship Hydrodynamic Interaction

A numerical study of ship-to-ship interaction forces is performed using a commercial CFD code, and the results are compared with experimental data and with the results of a panel method analysis. Two ship models have been used in the interaction forces analysis: a tug and a tanker, advancing parallel to each other with different lateral distances and two different values of the fluid depth. Computations are carried out with four different flow models: inviscid and viscous flow with the free surface modeled as a rigid wall and inviscid and viscous flow with the deformable free surface. A fair agreement was obtained with available experimental data and results obtained by panel method. The influence of viscosity in the computations is found to be comparatively weak, while the wavemaking effects may be important, at small magnitude of the horizontal clearance.     

Relationship between well-being and daily time use of elderly: evidence from the disabilities and use of time survey

According to US Census Bureau, the number of individuals in the age group above 65 years is expected to increase by more than 100% from the year 2000 to 2030. It is anticipated that increasing elderly population will put unforeseen demands on the transportation infrastructure due to the atypical mobility and travel needs of the elderly. Consequently, transportation professionals have attempted to understand the travel behavior of the elderly including the trip frequency, trip distance and mode choice decisions. Majority of the research on elderly travel behavior have focused on the mobility outcomes with limited research into understanding the tradeoffs made by this population segment in terms of their in-home and out-of-home activity engagement choices. The goal of the current research is to contribute to this line of inquiry by simultaneously exploring the daily activity engagement choices of the elderly Americans including their in-home and out-of-home activity participation (what activities to pursue) and time alloocation (duration of each activity) decisions while accounting for the temporal constraints. Further, the study attempts to explore the relationship between physical and subjective well-being and daily activity engagement decisions of the elderly; where subjective well-being is derived from reported needs satisfaction with life and different domains of it. To this end, data from the Disabilities and Use of Time survey of Panel Study of Income Dynamics was used to estimate a panel version of MDCEV model. In addition to person- and household-level demographic variables, activity participation and time use choices of elderly were found to vary across different levels of reported physical and subjective well-being measures. The model estimation results were plausible and provide interesting insights into the activity engagement choices of the elderly with implications for transportation policy development. Among other socio-demographic variables, living arrangements (living with family versus in elderly homes) were found to have significant influence on how people participate into different in-home versus out-of-home activities. For example, elderly living in the elderly home were found to participate more into out-of-home activities compared to people living with families. Elderly with disabilities were found to compensate lower participation into out-of-home activities with more participation into in-home activities. Considerable heterogeneity was observed in time engagement behavior of the elderly across reported levels of satisfaction with finance, job and cognitive needs. For example, elderly expressing high satisfaction with job was found to spend less time in in-home social activities. Elderly reporting higher satisfaction with finance were found to spend more time into OH social and shopping activities.     

Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.