Suspended sediment and erosion dynamics in Kugmallit Bay and Beaufort Sea during ice-free conditions

The Mackenzie River is the largest river on the North American side of the Arctic and its huge freshwater and sediment load impacts the Canadian Beaufort Shelf. Huge quantities of sediment and associated organic carbon are transported in the Mackenzie plume into the interior of the Arctic Ocean mainly during the freshet (May to September). Changing climate scenarios portend increased coastal erosion and resuspension that lead to altered river-shelf-slope particle budgets. We measured sedimentation rates, suspended particulate matter (SPM), particle size and settling rates during ice-free conditions in Kugmallit Bay (3–5 m depth). Additionally, measurements of erosion rate, critical shear stress, particle size distribution and resuspension threshold of bottom sediments were examined at four regionally contrasting sites (33–523 m depth) on the Canadian Beaufort Shelf using a new method for assessing sediment erosion. Wind induced resuspension was evidenced by a strong relationship between SPM and wind speed in Kugmallit Bay. Deployment of sediment traps showed decreasing sedimentation rates at sites along an inshore–offshore transect ranging from 5400 to 3700 g m^− 2 day^− 1. Particle settling rates and size distributions measured using a Perspex settling chamber showed strong relationships between equivalent spherical diameter (ESD) and particle settling rates (r² = 0.91). Mean settling rates were 0.72 cm s^− 1 with corresponding ESD values of 0.9 mm. Undisturbed sediment cores were exposed to shear stress in an attempt to compare differences in sediment stability across the shelf during September to October 2003. Shear was generated by vertically oscillating a perforated disc at controlled frequencies corresponding to calibrated shear velocity using a piston grid erosion device. Critical (Type I) erosion thresholds (u) varied between 1.1 and 1.3 cm s^− 1 with no obvious differences in location. Sediments at the deepest site Amundsen Gulf displayed the highest erosion rates (22–54 g m^− 2 min^− 1) with resuspended particle sizes ranging from 100 to 930 µm for all sites. There was no indication of biotic influence on sediment stability, although our cores did not display a fluff layer of unconsolidated sediment. Concurrent studies in the delta and shelf region suggest the importance of a nepheloid layer which transports suspended particles to the slope. Continuous cycles of resuspension, deposition, and horizontal advection may intensify with reduction of sea ice in this region. Our measurements coupled with studies of circulation and cross-shelf exchange allow parameterization and modeling of particle dynamics and carbon fluxes under various climate change scenarios.     

Added resistance acting on hull of a non ballast water ship

In this paper, added resistances acting on a hull of non ballast water ship(NBS) in high waves is discussed. The non ballast water ships were developed at the laboratory of the authors at Osaka Prefecture University, Japan. In the present paper, the performances of three kinds of bow shapes developed for the NBS were theoretically and experimentally investigated to find the best one in high waves. In previous papers, an optimum bow shape for the NBS was developed in calm water and in moderated waves. For a 2 m model for experiments and computations, the wave height is 0.02 m. This means that the wave height is 15% of the draft of the ship in full load conditions. In this paper, added resistances in high waves up to 0.07 m for a 2 m model or 53% of the full load draft are investigated. In such high waves linear wave theories which have been used in the design stage of a ship for a long time may not work well anymore, and experiments are the only effective tool to predict the added resistance in high waves. With the computations for waves, the ship is in a fully captured condition because shorter waves, λ/Lpp0.6, are assumed.     

Optimizing the transportation of international container cargoes in Korea

This paper considers a multimodal transportation problem, which is the problem of determining the transportation flow, i.e. volume of container cargoes, and the transportation mode in each trade route, for the objective of minimizing the sum of shipping and inland transportation costs. The problem takes account of two restrictions: maximum cargo volumes capacitated at each seaport and maximum number of vehicles available at each transportation mode. To solve optimally the problem, this paper employs a mixed integer programming, which is an operations research technique. A case study is performed on the container cargo data in Korea and we draw several implications to improve efficiency in the transportation of international trade cargoes in Korea.     

Port and terminal selection by deep-sea container operators

This paper deals with the importance of port choice and container terminal selection for deep-sea container carriers. The paper focuses on the research question: on what basis do deep-sea container operators select container ports (strategy) and container terminals (financial reasons) in the Hamburg–Le Havre range over others? In answering this research question, three dimensions are addressed in detail: the buying decision characteristics; port choice strategy; and terminal selection. The results show that strategic considerations at company level are important. For port choice the most important criteria from a carrier's perspective are: availability of hinterland connections; reasonable tariffs; and immediacy of consumers (large hinterland). In addition to these criteria, shipping lines attach great value to often neglected factors, such as feeder connectivity, environmental issues and the total portfolio of the port. The study reveals that port selection and terminal selection are not the same with terminal selection criteria mainly depending on: handling speed; handling costs; reliability; and hinterland connections. The analysis also brought forward that the decision making is different per container carrier, per trade and per port type, implying that a one size fits all approach is not relevant.     

Rail Infrastructure: Challenges for Cost–Benefit Analysis and Other ex ante Evaluations

Abstract

Cost–benefit analysis (CBA) plays a major role in the ex ante evaluation of rail projects in many western countries. At first sight carrying out a CBA for rail projects seems straightforward, since cost estimates are almost always available, and the most dominant benefits are generally known, being the travel time saved and the increase in consumer surplus due to induced demand. However, the practice is much more complex: the quality of current estimates for costs and benefits is often poor and several benefits-related aspects are ignored. This article gives an overview of the challenges in improving the quality of CBAs for rail projects.     

Traffic Sounds and Cycling Safety: The Use of Electronic Devices by Cyclists and the Quietness of Hybrid and Electric Cars

Abstract

The growing popularity of electric devices and the increasing number of hybrid and electric cars have recently raised concerns about the use of auditory signals by vulnerable road users. This paper consolidates current knowledge about the two trends in relation to cycling safety. Both a literature review and a crash data analysis were carried out. Based on a proposed conceptual model, knowledge gaps are identified that need to be addressed for a better understanding of the relation between limitations on auditory information while cycling. Results suggest that the concerns regarding the use of electronic devices while cycling and the advent of hybrid and electric vehicles are justified. Listening to music and conversing on the phone negatively influence cyclists’ auditory perception, self-reported crash risk and cycling performance. With regard to electric cars, a recurring problem is their quietness at low speeds. Implications of these findings in terms of cycling safety are discussed.     

Modeling residential sorting effects to understand the impact of the built environment on commute mode choice

This paper presents an examination of the significance of residential sorting or self selection effects in understanding the impacts of the built environment on travel choices. Land use and transportation system attributes are often treated as exogenous variables in models of travel behavior. Such models ignore the potential self selection processes that may be at play wherein households and individuals choose to locate in areas or built environments that are consistent with their lifestyle and transportation preferences, attitudes, and values. In this paper, a simultaneous model of residential location choice and commute mode choice that accounts for both observed and unobserved taste variations that may contribute to residential self selection is estimated on a survey sample extracted from the 2000 San Francisco Bay Area household travel survey. Model results show that both observed and unobserved residential self selection effects do exist; however, even after accounting for these effects, it is found that built environment attributes can indeed significantly impact commute mode choice behavior. The paper concludes with a discussion of the implications of the model findings for policy planning.

汽车改装潮流中维修店的营利机会(下)

为提高汽车性能而进行的改装工作,可以为独立汽修店提供一些营利的机会,但许多汽修厂还没有意识到这一点。不过,与通常的维修业务不同的是,进行汽车改装所产生的后果,车主必须愿意承担至少一部分的责任。     

2006年美国进口车新技术一览(上)

在美国,所有进口汽车制造商都推出了2006款新车型．其中包括两种混合动力车。这些进口车也将能达到美国国产车的维修技术要求,如按照SAEJ2534标准的车载电脑通用再编程技术。本田、日产、丰田以及马自达和宝马汽车都可通过网络实现这一功能。本文将介绍一些新的技术。