Sensitivity analysis of the probabilistic damage stability regulations for RoPax vessels

In the light of the newly developed harmonised probabilistic damage stability regulations, set to come into force in 2009, this article presents a systematic and thorough analysis of the sensitivity of the Attained Subdivision Index with reference to a wide range of related design parameters. The sensitivity of the probabilistic regulations was investigated for a typical large RoPax vessel, with variation of parameters, such as the number, positioning and local optimisation of transverse bulkheads; the presence and position of longitudinal bulkheads below the main vehicle deck; the presence of side casings; and the height of the main deck and double bottom. The effects of water on deck and of operational parameters (draught, centre of gravity and trim) were also investigated. The results of the study, presented in graphical form, can provide valuable assistance to the designer when determining subdivision characteristics at the very early stage of the design process, resulting in optimal, efficient and safe ships.     

舰载相控阵雷达功能仿真建模与软件设计

根据舰载相控阵雷达的组成及工作原理,介绍一种舰载相控阵雷达功能仿真的方法.重点描述雷达回波信号功率模型、噪声和干扰功率模型、杂波功率模型、综合信噪比模型等数学仿真模型.通过对仿真软件功能需求分析,给出软件结构、软件设计流程等软件开发要点.     

Research on the coefficient of sound absorption in turbid water

China’s coastal waters are turbid and the properties of the seabed are complex. This negatively impacts the performance of underwater detection equipment. The properties of sound absorption in turbid water are not well understood. In this paper, the coefficient of sound absorption in turbid water was measured by the reverberation technique. All work was done in a reverberation barrel made of seamless aluminum. First, pure water was poured into the reverberation barrel and its reverberation time measured. Next, various concentrations of turbid water were poured into the barrel and their reverberation time measured. After all data had been gathered, the coefficient of sound absorption in turbid water of different concentrations was calculated. From this we determined a law of sound absorption in turbid water as summarized in the paper.     

Fast direction of arrival algorithm based on vector-sensor arrays using wideband sources

An acoustic vector sensor （AVS） can capture more information than a conventional acoustic pressure sensor （APS）. As a result, more output channels are required when multiple AVS are formed into arrays, making processing the data stream computationally intense. This paper proposes a new algorithm based on the propagator method for wideband coherent sources that eliminates eigen-decomposition in order to reduce the computational burden. Data from simulations and lake trials showed that the new algorithm is valid： it resolves coherent sources, breaks left/right ambiguity, and allows inter element spacing to exceed a half-wavelength.     

Broaching prediction of a wave-piercing tumblehome vessel with twin screws and twin rudders

The new intact stability criteria which are under development at the International Maritime Organization (IMO) are required to cover a broaching phenomenon, well known as a great threat to high-speed vessels which can lead to capsizing. Some reports exist which demonstrate that their numerical models can predict a highly nonlinear phenomenon of broaching. However, additional validation studies are needed for unconventional vessels, in addition to conventional ones, to develop direct stability assessment methods for the new intact stability criteria. In this research, we selected as the subject ship a wave-piercing tumblehome vessel with twin screws and twin rudders, a design expected to be one of a new generation of high-speed monohull ships. Firstly, a series of captive model tests were conducted to measure the resistance, the manoeuvring forces, the wave-exciting forces, the heel-induced hydrodynamic forces, and the roll restoring variation for the unconventional tumblehome vessel. Secondly, the existing mathematical model which had been developed for broaching prediction of conventional vessels with a single propeller and a single rudder was extended to unconventional vessels with twin propellers and twin rudders. Finally, comparisons between numerical simulations and the existing free running model experiments were conducted. As a result, it was demonstrated that fair quantitative prediction of broaching is realised when the rudder force variation, the roll restoring variation and the heel-induced hydrodynamic force for large heel angles are taken into account.     

Response-based analysis for Tension Leg Platform

The typical industry practice for Tension Leg Platform (TLP) design focuses on a conventional short-term design recipe, which assumes that an N-year design environment leads to an N-year response. In the response-based design method, the TLP is designed to withstand N-year responses rather than respond to N-year environmental conditions. In this paper, we present an overview and a general procedure for the response-based design method and use a case study to compare the critical TLP responses between the two methods. The results of our comparison show that the conventional short-term design method often contains an element of conservatism and that the response-based design method can reduce the design conditions and thereby achieve cost savings.     

Response spectrum method for extreme wave loading with higher order components of drag force

Response spectra of fixed offshore structures impacted by extreme waves are investigated based on the higher order components of the nonlinear drag force. In this way, steel jacket platforms are simplified as a mass attached to a light cantilever cylinder and their corresponding deformation response spectra are estimated by utilizing a generalized single degree of freedom system. Based on the wave data recorded in the Persian Gulf region, extreme wave loading conditions corresponding to different return periods are exerted on the offshore structures. Accordingly, the effect of the higher order components of the drag force is considered and compared to the linearized state for different sea surface levels. When the fundamental period of the offshore structure is about one third of the main period of wave loading, the results indicate the linearized drag term is not capable of achieving a reliable deformation response spectrum.     

Three-dimensional fluid-structure interaction case study on cubical fluid cavity with flexible bottom

In this paper, we report our study on a numerical fluid-structure interaction problem originally presented by Mok et al.(2001) in two dimensions and later studied in three dimensions by Valdés Vazquez(2007), Lombardi(2012), and Trimarchi(2012). We focus on a 3D test case in which we evaluated the sensitivity of several input parameters on the fluid and structural results. In particular, this analysis provides a starting point from which we can look deeper into specific aspects of these simulations and analyze more realistic cases, e.g., in sails design. In this study, using the commercial software ADINATM, we addressed a well-known unsteadiness problem comprising a square box representing the fluid domain with a flexible bottom modeled with structural shell elements. We compared data from previously published work whose authors used the same numerical approach, i.e., a partitioned approach coupling a finite volume solver(for the fluid domain) and a finite element solver(for the solid domain). Specifically, we established several benchmarks and made comparisons with respect to fluid and solid meshes, structural element types, and structural damping, as well as solution algorithms. Moreover, we compared our method with a monolithic finite element solution method. Our comparisons of new and old results provide an outline of best practices for such simulations.     

A numerical study on piezoelectric energy harvesting by combining transverse galloping and parametric instability phenomena

This paper aims to numerically investigate the effects of parametric instability on piezoelectric energy harvesting from the transverse galloping of a square prism. A two degrees-of-freedom reduced-order model for this problem is proposed and numerically integrated. A usual quasi-steady galloping model is applied, where the transverse force coefficient is adopted as a cubic polynomial function with respect to the angle of attack. Time-histories of nondimensional prism displacement, electric voltage and power dissipated at both the dashpot and the electrical resistance are obtained as functions of the reduced velocity. Both, oscillation amplitude and electric voltage, increased with the reduced velocity for all parametric excitation conditions tested. For low values of reduced velocity, 2:1 parametric excitation enhances the electric voltage. On the other hand, for higher reduced velocities, a 1:1 parametric excitation (i.e., the same as the natural frequency) enhances both oscillation amplitude and electric voltage. It has been also found that, depending on the parametric excitation frequency, the harvested electrical power can be amplified in 70% when compared to the case under no parametric excitation.