Comparison of computational and analytical methods for evaluation of failure pressure of subsea pipelines containing internal and external corrosions

In the designing stage of subsea pipelines, the design parameters, such as pipe materials, thickness and diameters, are carefully determined to guarantee flow assurance and structural safety. However, once corrosion occurs in pipelines, the operating pressure should be decreased to prevent the failure of pipelines. Otherwise, an abrupt burst can occur in the corroded region of the pipeline, and it leads to serious disasters in the environment and financial loss. Accordingly, the relationship between the corrosion amount and failure pressure of the pipeline, i.e., the maximum operating pressure, should be investigated, and then, the assessment guideline considering the failure pressure should be identified. There are several explicit type codes that regulate the structural safety for corroded subsea pipelines, such as ASME B31G, DNV RF 101, ABS Building and Classing Subsea Pipeline Systems, and API 579. These rules are well defined; however, there are some limitations associated with describing precise failure pressure. Briefly, all of the existing rules cannot consider the material nonlinearity, such as elastoplasticity effect of the pipeline, as well as the actual three-dimensional corrosion shape. Therefore, the primary aim of this study is to suggest a modified formula parameter considering the above-mentioned pipeline and corrosion characteristics. As a result, the material nonlinearity as well as the corrosion configuration, i.e., axial/circumferential corrosion length, width and depth, is reflected in a set of finite element models and a series of finite element analysis considering the operation conditions are followed. Based on the comparative study between the simulation and analytical results, which can be obtained from the classification society rules, the modified formulae for failure pressure calculation are proposed.     

An analytical investigation for oscillations in a harbor of a parabolic bottom

Based on the linear shallow water approximation, longitudinal and transverse oscillations in a rectangular harbor with a parabolic bottom are analyzed. The longitudinal ones are combinations of the Legendre functions of the first and second kinds and the transverse ones are expressed with modified Bessel equations. Analytic results for longitudinal oscillations show that the augmentation of rapidity of variation of the water depth shifts the resonant wave frequencies to larger values and slightly changes the positions of the nodes for the resonant modes. For the transverse oscillations trapped within the harbor which are typically standing edge waves, the dispersion relationship is derived and the spatial structures of the first four modes are presented. The solutions illustrate that all the trapped modes are affected by the varying water depth parameters, especially for the higher modes whose profiles extend farther and the distribution of the energy of transverse oscillations is influenced by the rapidity of variation of the bottom within the harbor.     

The influence of route choice and operating conditions on fuel consumption and CO<Subscript>2</Subscript> emission of ships

The influence of various parameters, such as ship initial speed (full ahead and lower engine loads), loading condition, heading angle and weather conditions on ship fuel consumption and CO₂ emission is presented. A reliable methodology for estimating the attainable ship speed, fuel consumption and CO₂ emission in different sea states is described. The speed loss is calculated by taking into account the engine and propeller performance in actual seas as well as the mass inertia of the ship. The attainable ship speed is obtained as time series. Correlation of speed loss with sea states allows predictions of propulsive performance in actual seas. If the computation is used for weather routing purposes, values for various ship initial speed, loading conditions and heading angles for each realistic sea‐state must be provided. The voluntary speed loss is taken into account. The influence of the ship speed loss on various parameters such as fuel consumption and CO₂ emissions is presented. To illustrate the presented concept, the ship speed and CO₂ emissions in various routes of the Atlantic Ocean are calculated using representative environmental design data for the track of the routes where the ship will sail.     

Numerical investigation of the gate motion effect on a dam break flow

The effects of a moving gate on dam break flow experiments are numerically considered in this paper. The dam break flow process is modelled by a sudden gate release. A Constrained Interpolation Profile (CIP)-based model is employed to solve the Navier-Stokes equations with the free surface boundary condition to deal with the water-air-gate interactions. In addition, the VOF-type THINC/SW method is used to capture the free surface. The movable gate is simulated by an immersed boundary, and a gate motion formula is proposed from existing experimental data and applied in the dam break flow computations. The difference between the water profile and pressure domain with/without gate motion is examined. The dam breaks with different gate motions are discussed as well. The numerical results show that the proposed gate motion formula correlates well with the numerical modelling, and the gate motion has a significant influence in the water collapse process and cannot be neglected in the study of dam break.     

SiMoCo: the viability of a prototype platform for a coastal monitoring system: a case study

Coastal zones are among the most productive areas in the world, offering a wide variety of valuable habitats and ecosystems services. Despite the low population density in the Brazilian coastal zone, their distribution is quite concentrated near some coastal cities and state capitals. This concentration places enormous pressure on coastal resources. Therefore, the main objective of this paper is to present an overview on the current status of SiMoCo (Sistema de Monitoramento Costeiro, or Coastal Monitoring System in English) project as a possible early warning system that can be integrated to the Brazilian Coastal Management Information System. This prototype platform provides a real-time access to the composition, organization and simulation of planktonic communities. First, our results demonstrate such a system detecting a target dinoflagellate; second, we apply structural and functional indexes to compare and characterize the ecological networks from two different coastal areas. Conclusions are made about SiMoCo’s feasibility and its possible contribution to the decision-making process within integrated coastal zone management (ICZM) strategies.     

Roll-induced bifurcation in ship maneuvering under model uncertainty

In this paper, a mathematical model is developed for the maneuvering motion of a naval ship and bifurcations of its equilibrium are identified in roll-coupled motion. The subject ship is a high-speed surface combatant with twin-propeller twin-rudder system. Captive model tests are conducted for the ship using planar motion mechanism. Maneuvering coefficients are calculated by polynomial curve fitting of the test data. Uncertainty distribution in the coefficients is assumed same as that of the curve fitting errors. Uncertainty in the model coefficients is propagated to full-scale simulation results by the stochastic response surface method (SRSM). This method is computationally efficient as compared to standard Monte Carlo simulation technique. The SRSM uses polynomial chaos expansion of orthogonal to fit any probability distribution. Bifurcation analysis of the mathematical model is performed by varying the vertical center of gravity as the bifurcation parameter. Hopf bifurcation is identified. It is found that the bifurcations occur due to the coupling of roll motion with sway, yaw motion and rudder angle. In the presence of wind, roll angle response in bifurcation diagram is discussed.     

Experimental verification of shock sterilization for marine <Emphasis Type="Italic">Vibrio</Emphasis> sp. using microbubbles interacting with underwater shock waves

In this paper, shock sterilization using the motions of microbubbles induced by underwater shock waves is verified experimentally. A bio-experiment is carried out using marine Vibrio sp.. Underwater shock waves are produced by electric discharge in a semi-ellipsoidal discharge reflector. The shock waves are focused to increase the pressure that the generated microbubbles are exposed to. The microbubbles are generated independently. The microbubble generator can produce microbubbles of around 50 μm diameter by means of Kelvin–Helmholz instability and Venturi effect. Propagation behavior of shock waves and generation process of microbubbles are captured by high-speed camera. The experimental results show that the supply of microbubbles increases the potential of shock sterilization. In addition, it is found that shock waves without microbubbles also have the capacity of sterilization, and this means that cavitation bubbles generated behind converging shock waves contribute to inactivating marine bacteria.     

Nonlinear model predictive dynamic positioning control of an underwater vehicle with an onboard USBL system

This paper presents a novel optimization-based approach for dynamic positioning (DP) of a fully actuated underwater vehicle equipped with an onboard ultrashort baseline transceiver to provide relative position information of two earth-fixed transponders near the vehicle. The DP system error is defined by the transponders’ positions compared to the desired values, which occur at the vehicle’s target pose (position and orientation). The proposed DP strategy is composed of two loops in a hierarchical structure. In the kinematic loop, the nonlinear model predictive control is used to generate the desired velocity by optimizing a cost function of the predictive trajectories under the constraints of velocity and transponder bearings over a limited time horizon. In the dynamic loop, the neural network model reference adaptive control with pseudo control hedging is utilized to ensure the asymptotical convergence of velocity tracking errors in the presence of uncertainties associated with unknown model parameters, currents and thruster dynamics. The effectiveness of the proposed control scheme is illustrated by comprehensive simulations.     

Model,process, technique,and the good thing

The paper unpacks the planning process into its component parts: model, process, technique, and goals—the “good thing”. The paper advances the concept that planning, policy-making, and organizational restructuring can be analyzed under the same framework. Each of the four components is described and reductionist examples are presented to clarify the intention and to illustrate the technique that the transport analyst teams employ in their work. The examples cover both successes and failures. They point toward the enormous scientific task ahead for planning to become meaningful and relevant to the problems of today. Finally, in the frame of the willingness to pay, the paper puts forward a case for an institutional framework for a financially autonomous road administration. Similarly organized, administered, and managed entities are relevant also for other transport modes.

How do people respond to congestion mitigation policies? A multivariate probit model of the individual consideration of three travel-related strategy bundles

This study explores the relationships between adoption and consideration of three travel-related strategy bundles (travel maintaining/increasing, travel reducing, and major location/lifestyle change), linking them to a variety of explanatory variables. The data for this study are the responses to a fourteen-page survey returned by nearly 1,300 commuting workers living in three distinct San Francisco Bay area neighborhoods in May 1998. We first identified patterns of adoption and consideration among the bundles, using pairwise correlation tests. The test results indicate that those who have adopted coping strategies continue to seek for improvements across the spectrum of generalized cost, but perhaps most often repeating the consideration of a previously-adopted bundle. Furthermore, we developed a multivariate probit model for individuals’ simultaneous consideration of the three bundles. It is found that in addition to the previous adoption of the bundles, qualitative and quantitative Mobility-related variables, Travel Attitudes, Personality, Lifestyle, Travel Liking, and Sociodemographics significantly affect individual consideration of the strategy bundles. Overall, the results of this study give policy makers and planners insight into understanding the dynamic nature of individuals’ responses to travel-related strategies, as well as differences between the responses to congestion that are assumed by policy makers and those that are actually adopted by individuals.