Dynamics of inorganic nutrient species in the Bohai seawaters

Within the frame of a Sino-German Joint Research Program, two cruises of “R/V Dong Fang Hong 2” were carried out in September–October 1998 and April–May 1999, respectively, to understand the dynamics of nutrients in the Bohai. Nutrient species (NO₃⁻, NO₂⁻, NH₄⁺, PO₄³⁻ and SiO₃²⁻) are determined colorimetrically on board for five anchor and 30 grid stations. In situ incubation experiments are performed to determine planktonic nutrient uptake and benthic exchange flux. Nutrient concentrations display short-term variability and seasonal change in the Bohai, with higher levels in shallow coastal waters than in the Central Bohai. The influence of riverine discharge on nutrient levels can be seen from salinity isopleths, nutrient distribution and species ratios. Near-bottom (nb) waters have similar nutrient concentrations as to the surface waters in the Central Bohai, whereas stratification takes place in the Bohai Strait and North Yellow Sea. In situ incubation experiments provide evidence that the uptake ratio (i.e. N, P) by phytoplankton is proportional to the ratios among nutrient species in ambient waters. Based on the data of this study and previously publications, a preliminary estimate of nutrient budgets via riverine input and atmospheric deposition is established. The results indicate that atmospheric deposition gains importance over rivers in delivering nutrients into the Bohai and sustain the new production, following recent decrease in riverine inflow caused by drought periods in North China and damming practices. A historical review of nutrient data indicates that concentrations of nitrogen increase and phosphorus and silica decrease in the Central Bohai over last 40 years. This potentially has an important influence on the health of ecosystem in Bohai (e.g. food web and community structure), though further study is needed to examine the scenario in more detail.     

Impact of macrozoobenthic structures on near-bed sediment fluxes

Sandy sediments in shallow coastal waters of the Baltic Sea are often characterised by large numbers of biogenic structures which are produced by macrozoobenthos species. A series of experiments was devised to quantify how the interaction of such structures with the near-bed flow regime affects the sediment flux. Most experiments were done with simplified replicates of structures generated by typical species commonly found in the Mecklenburg Bight, starting with solitary structures and regularly-spaced arrays in a range of characteristic population densities, followed by a complex benthic macrofauna community, both artificial and alive. A laboratory flume channel, equipped with an acoustic Doppler flow sensor and a topography scanning laser, was used for high-resolution measurements (2 mm horizontal step size and 0.3 mm vertical resolution) of sand erosion (220 µm median grain size, at 20 cm s^− 1) and fine particle deposition (8 µm grain size, at 5 cm s^− 1). Sediment transport threshold values were measured for each layout. As a rule-of-thumb, both the erosion fluxes and the deposition of suspended matter increased considerably at low population densities (below 2%, expressed as percent of the sediment surface covered, i.e. roughness density RD). Above densities of 4%, erosion almost stopped inside the test arrays, and deposition remained well below the level of unpopulated areas. An attempt to extrapolate these findings to field conditions (using field current velocity data from 2001) showed that the net flux switched from erosion to deposition for densities above 5%. These parameters can now be integrated into a numerical sediment transport model coupling waves, currents, sediment dynamics and biological processes, which is currently under construction at the Baltic Sea Research Institute (IOW), Rostock, Germany.     

The use of polycyclic aromatic hydrocarbons as a particulate tracer in the water column of Gaoping (Kaoping) Submarine Canyon

Time-series samples of settling particles were collected in the water column of Gaoping (formerly spelled Kaoping) Submarine Canyon (KPSC) with two sediment traps on taut-line moorings deployed at two different depths (60 and 280 m) between May 26 and June 27, 2004. Average total polycyclic aromatic hydrocarbon (PAH) concentrations of upper and lower trap array samples were 310 ± 61 ng g^− 1 dw (range: 200–440) and 240 ± 36 ng g^− 1 dw (range: 180–290), respectively. Principal component analysis results suggest that PAH sources in the trap-collected particles included diesel vehicle/coal burning, diagenetic sources, and petroleum release. PAH downward fluxes based on settling particles were estimated to be 12–44 μg m^− 2 d^− 1. These values are higher than those reported in the literature for most coastal areas. During the sampling period, both traps were significantly tilted by tidal current and fluctuated vertically. The upper traps experienced greater vertical movements, thus their particle characteristics (e.g., POC, particle mass, and fine particle fraction) varied more than those of the lower traps. Hourly depth variations of the tilted sediment trap array were echoed by the corresponding total PAH concentrations. Moreover, the PAH composition of the collected particles was related to the flow direction and speed. These observations suggest that PAHs can be used as an effective chemical tracer for the transport of terrestrial and marine particulates in a complex aquatic environment like Gaoping (Kaoping) Submarine Canyon.     

A study of vibration and vibration control of ship structures

This paper examines the vibration characteristics and vibration control of complex ship structures. It is shown that input mobilities of a ship structure at engine supports, due to out-of-plane force or bending moment excitations, are governed by the flexural stiffness of the engine supports. The frequency averaged input mobilities of the ship structure, due to such excitations, can be represented by those of the corresponding infinite beam. The torsional moment input mobility at the engine support can be estimated from the torsional response of the engine bed section under direct excitation. It is found that the inclusion of ship hull and deck plates in the ship structure model has little effect on the frequency-averaged response of the ship structure. This study also shows that vibration propagation in complex ship structures at low frequencies can be attenuated by imposing irregularities to the ring frame locations in ships. Vibration responses of ship structures due to machinery excitations at higher frequencies can be controlled by structural modifications of the local supporting structures such as engine beds in ships.     

Hubris or humility? Accuracy issues for the next 50 years of travel demand modeling

This study reviews the 50-year history of travel demand forecasting models, concentrating on their accuracy and relevance for public decision-making. Only a few studies of model accuracy have been performed, but they find that the likely inaccuracy in the 20-year forecast of major road projects is ±30 % at minimum, with some estimates as high as ±40–50 % over even shorter time horizons. There is a significant tendency to over-estimate traffic and underestimate costs, particularly for toll roads. Forecasts of transit costs and ridership are even more uncertain and also significantly optimistic. The greatest knowledge gap in US travel demand modeling is the unknown accuracy of US urban road traffic forecasts. Modeling weaknesses leading to these problems (non-behavioral content, inaccuracy of inputs and key assumptions, policy insensitivity, and excessive complexity) are identified. In addition, the institutional and political environments that encourage optimism bias and low risk assessment in forecasts are also reviewed. Major institutional factors, particularly low local funding matches and competitive grants, confound scenario modeling efforts and dampen the hope that technical modeling improvements alone can improve forecasting accuracy. The fundamental problems are not technical but institutional: high non-local funding shares for large projects warp local perceptions of project benefit versus costs, leading to both input errors and political pressure to fund projects. To deal with these issues, the paper outlines two different approaches. The first, termed ‘hubris’, proposes a multi-decade effort to substantially improve model forecasting accuracy over time by monitoring performance and improving data, methods and understanding of travel, but also by deliberately modifying the institutional arrangements that lead to optimism bias. The second, termed ‘humility’, proposes to openly quantify and recognize the inherent uncertainty in travel demand forecasts and deliberately reduce their influence on project decision-making. However to be successful either approach would require monitoring and reporting accuracy, standards for modeling and forecasting, greater model transparency, educational initiatives, coordinated research, strengthened ethics and reduction of non-local funding ratios so that localities have more at stake.     

On the use of mathematical programming in the evaluation of transport policies

This paper focuses on the evaluation processes by which decisions regarding transportation alternatives can be assisted. A multidimensional approach usually called multiple criteria decision making is required to represent the complexity of transportation policy and systems.

The multiple criteria decision making techniques can be divided into two groups. The first is based on a ranking scheme approach and the second on a mathematical programming approach.

A multiple objective mathematical programming procedure known as Goal Programming is presented. The authors examined the use of that procedure in real transportation problems.

The results suggest that multiple objective mathematical programming techniques in general do not appear to be appropriate in transportation policy analysis involving mutually exclusive alternatives. Their use can be limited to special cases in the private sector.     

Optimal traffic assignment to urban streets with air pollution consideration

Traffic assignment is usually determined solely on the basis of minimum travel time through the network. The present study on traffic assignment has taken into account not only traffic performance but also air quality over the street. A simple model of highway air pollution is developed by considering macroscopic material balance of polluted air mass over a segment of a highway that passes through an urban area, A new traffic assignment scheme has been developed based on the air pollution model. The optimal traffic assignment obtained by the new scheme is affected significantly by meteorological conditions.     

Building Philippine Local Government Capacity for Coastal Resource Management

The responsibility for managing coral reefs and other coastal resources was largely devolved to coastal municipalities and cities in the Philippines in 1991 with the passage of the Local Government Code. Devolution of powers and responsibilities to local government has paved the way for mainstreaming coastal resource management at the local level. However, the capacity to carry out this mandate has only recently begun to mature as municipalities and cities gain an increased awareness of the importance of coastal resources to communities and economic development. Approaches and strategies to increase local government capacity for coastal resource management are described based on the experiences of the Coastal Resource Management Project of the United States Agency for International Development. Qualitative and quantitative data are used to illustrate the possible impact of these capacity building efforts and to describe the current capacity of local government to undertake coastal resource management. After five years of project implementation, coastal municipalities have increased technical capacity, have allotted financial resources, and have achieved key performance benchmarks in the delivery of coastal resource management as a basic service.     

Design and evaluation of an integrated inventory and transportation system

This paper proposes the adoption of an integrated inventory and transportation system (IITS) to minimize the total costs of inventory and transportation. A non-linear programing is developed by analyzing transportation and inventory costs with one supplier and many retailers in the distribution environment. The paper compares the proposed model with the traditional approach in computing total costs with numerical data. The results indicate that the total costs can be optimized by adopting integrated programing rather than the traditional approach, along with achieving improved customer service levels. In particular, sensitivity analysis is applied to determine the performance of the IITS under various transportation costs, holding costs and shortage costs. It shows that the transportation cost per unit is most sensitive in the proposed model. In this situation, the IITS is more effective for cost saving when set-up cost, holding and shortage costs are high, but is less effective for situations involving high per-unit transportation costs.     

Coastal erosion and sea level rise: Implications for ocean beach and San Francisco's westside transport project

Abstract

One of the consequences of sea level rise resulting from the greenhouse effect is increased coastal erosion. This article discusses a model of erosion that can be used to estimate the response of beaches to sea level rise. The model is applied to Ocean Beach, California, with particular attention to the consequences of accelerated erosion for the San Francisco Westside Sewer Transport. Results obtained show that erosion produced by accelerated sea level rise could cause substantial damage to the structure. Large expenditures on beach nourishment will be required to protect the transport and the recreational value of the beach.