A capacity restraint transit assignment with elastic line frequency

This paper proposes a new formulation for the capacity restraint transit assignment problem with elastic line frequency, in which the line frequency is related to the passenger flows on transit lines. A stochastic user equilibrium transit assignment model with congestion and elastic line frequency is proposed and the equivalent mathematical programming problem is also formulated. Since the passenger waiting time and the line capacity are dependent on the line frequency, a fixed point problem with respect to the line frequency is devised accordingly. The existence of the fixed point problem has been proved. A solution algorithm for the proposed model is presented. Finally, a numerical example is used to illustrate the application of the proposed model and solution algorithm.     

与速度有关的高负荷轮轨接触的粘着力(一)

为确定与速度有关的轮轨间的粘着力,设计了一种包含了与温度、弹性模数以及屈服点有关的动力学模型.     

Planktonic community structure and carbon cycling in the Arabian Sea as a result of monsoonal forcing: the application of a generic model

The Arabian Sea exhibits a complex pattern of biogeochemical and ecological dynamics, which vary both seasonally and spatially. These dynamics have been studied using a one-dimensional vertical hydrodynamic model coupled to a complex ecosystem model, simulating the annual cycle at three contrasting stations. These stations are characterised by seasonally upwelling, mixed-layer-deepening and a-seasonal oligotrophic conditions, respectively, and coincide with extensively measured stations on the two JGOFS ARABESQUE cruises in 1994. The model reproduces many spatial and temporal trends in production, biomass, physical and chemical properties, both qualitatively and quantitatively and so gives insight into the main mechanisms responsible for the biogeochemical and ecological complexity. Monsoonal systems are typified by classical food web dynamics, whilst intermonsoonal and oligotrophic systems are dominated by the microbial loop. The ecosystem model (ERSEM), developed for temperate regions, is found to be applicable to the Arabian Sea system with little reparameterisation. Differences in in-situ physical forcing are sufficient to recreate contrasting eutrophic and oligotrophic systems, although the lack of lateral terms are probably the greatest source of error in the model. Physics, nutrients, light and grazing are all shown to play a role in controlling production and community structure. Small-celled phytoplanktons are predicted to be dominant and sub-surface chlorophyll maxima are robust centers of production during intermonsoon periods. Analysis of carbon fluxes indicate that physically driven outgassing of CO₂ predominates in monsoonal upwelling systems but ecological activity may significantly moderate CO₂ outgassing in the Arabian Sea interior.     

Observations on colony formation by the cosmopolitan phytoplankton genus Phaeocystis

Few marine phytoplankton have heteromorphic life cycles and also often dominate the ecosystems in which they occur. The class Prymnesiophyceae contains a notable exception: the genus Phaeocystis includes three species that form gelatinous colonies but also occur within their ranges as solitary cells. Phaeocystis antarctica and P. pouchetii are exclusively high latitude taxa, and are notable for regionally tremendous blooms of the colony stage. P. globosa occurs circumglobally, yet its colony blooms primarily are confined to colder waters within its range. Three additional species are warm water forms that have been reported only as solitary cells or loose aggregations that bear little resemblance to the organized colonies of the other taxa. Interpretation of existing data indicates that resource availability (light, temperature and nutrients) by itself is not sufficient to explain this distinction between cold-water colony-forming taxa and warm water solitary cell taxa, nor why colony development in P. globosa is essentially a spatially restricted phenomenon within a much broader geographic range. Colony development by P. globosa in situ has been observed at temperatures ≥20 °C, but only rarely and generally under conditions of seasonally or anthropogenically elevated nutrient supply. Data presented here demonstrate colony development at 20–22 °C in natural plankton communities from oligotrophic waters that were pre-screened through 63 μm mesh (i.e. lacking mesozooplankton and large microzooplankton), but not in unscreened communities containing microzooplankton and >63 μm zooplankton. Reduction of colony proliferation at higher temperatures by mesozooplankton grazing remains as an intriguing possibility that is consistent with available evidence to help explain differences in latitudinal extent of in situ colony development. These data are interpreted within a theoretical framework regarding the potential advantages and disadvantages of the two life cycle stages.     

An evaluation of vehicle deceleration profiles

Vehicles stopping at signalized intersections were examined for the purpose of evaluating the validity of the common assumption of constant and uniform deceleration rates. The data set consisted of the first vehicles to stop upon the onset of the yellow signal interval with measurements of the initial approach speed, deceleration time, and deceleration distance. The deceleration rate may be computed using only two of the three measured values; thus the rate for each vehicle can be determined by three different equations. With nonuniform deceleration profiles, the equations will produce different values; and the degree of nonuniformity can be determined by comparing the differences in the computed deceleration rates. The analysis of the field observations indicated that 69 percent of the vehicles demonstrated deceleration profiles associated with nonuniform deceleration rates. Furthermore, the deceleration profile and the degree of nonuniformity were found to be a function of the initial approach speed.     

Unconventional Bogie Designs - Their Practical Basis and Historical Background

This paper deals with the design concepts for steerable bogies. A brief historical background is given and the modern design basis generated by the creep theory is summarised with regard to curving performance and dynamic stability of two- and three-axle bogies. The basic structural elements used for trailing and motorised steerable bogies are illustrated. Experience gained with some recent designs of self-steering and forced-steering bogies is discussed and achievable stability and curving performances are quoted.     

Shipping and investment incentives: a trilogy Part 3. The effectiveness of investment incentives for shipping—the UK experience 1950-1987

This paper concentrates on the determinants of investment and examines both theoretical and empirical work on the investment function. The major determinants are considered and a case study of the United Kingdom shipping industry in the period 1963-1987 is undertaken. The analysis is unable to find any real link between the value of the investment incentives packages available to the UK shipping industry and the size of the UK fleet during this period. The conclusion follows that while financial factors (e.g. favourable credit arrangements) or individual components (e.g. investment grants) of fiscal packages may influence the decision to invest, the total package has not affected the level of shipping investment in the manner expected.     

Fatigue design for plug/ring type gas welded joints of sts301l including welding residual stresses

This paper presents a fatigue design method for plug and ring type gas welded joints, which incorporates welding residual stress effects. A non-linear finite element analysis (FEA) was first performed to simulate the gas welding process. The numerically predicted residual stresses of the gas welds were then compared to experimental results measured using a hole drilling method. In order to evaluate the fatigue strength of the plug and ring type gas welded joints, a stress amplitude (σ _a ) _R taling the welding residual stress of the gas weld into account was introduced and is based on a modified Goodman equation incorporating the effect of the residual stress. Using the stress amplitude (σ _a ) _R , the ΔP-N _f relations obtained from fatigue tests for plug and ring type gas welded joints having various dimensions and shapes were systematically rearranged into (σ _a ) _R -N _f relations. It was found that the proposed stress amplitude (σ _a ) _R could provide a systematic and reasonable fatigue design criterion for the plug and ring type gas welded joints.     

Ergonomic and biomechnical analysis of automotive general assembly using XML and digital human models

Automotive general assembly requires many manual assembly operations to be carried out by human workers. Ergonomic analysis is an important part of the design and evaluation of products, jobs, tools, machines and environments for safe, comfortable and effective human functioning. Most recent researches have involved the evaluation of working conditions to prevent work-related musculoskeletal disorders. The majority of previous research on automotive companies has mainly considered the results of ergonomic analyses such as RULA (Rapid Upper Limb Assessment), REBA (Rapid Entire Body Assessment) and OWAS (Ovako Working Posture Analysis System). Analysis of static posture including reachability, clearances for arm, hand and tool has also been used to evaluate working conditions. However, in addition to static posture analysis, a biomechanical analysis in dynamic conditions should also be conducted. There are no integrated frameworks or standard schema for ergonomic analysis using digital human models in digital environments. The purpose of this paper is to propose a new framework for the evaluation of working conditions by ergonomic and biomechanical analysis using digital models based on XML standard schema, including: products, processes, manufacturing resources and human workers. This paper presents the analysis results using the proposed framework for automotive general assembly operations. We propose a new framework for the evaluation of the assembly operations and their environments. Then we apply a digital human model to the dynamic simulation of general automotive assembly operations based on standard schemas in XML and PPRH (Product, Process, Resource and Human). Using PPRH information based on a standard XML schema to analyze the ergonomic and biomechanical results, the engineer can visualize, analyze and improve assembly operations and working environments in automotive general assembly shops using digital models.