The use of gait parameters to evaluate pedestrian behavior at scramble phase signalized intersections

Pedestrian scramble phasing is usually implemented to reduce pedestrian‐vehicle conflicts and therefore increase the safety of the intersection. However, to adequately determine the benefits of scramble phasing, it is necessary to understand how pedestrians react to such an unconventional design. This study investigates changes in pedestrian crossing behavior following the implementation of a scramble phase by examining the spatiotemporal gait parameters (step length and step frequency). This detailed microscopic‐level analysis provides insight into changes in pedestrian walking mechanisms as well as the effect of various pedestrian and intersection characteristics. The study uses video data collected at a scramble phase signalized intersection in Oakland, California. Gait parameters were found to be influenced by pedestrian gender, age, group size, crosswalk length, and pedestrian signal indications. Both average step length and walking speed were significantly higher for diagonally crossing pedestrians compared with pedestrians crossing on the conventional crosswalks. Pedestrians were found to have the tendency to increase their step length more than their step frequency to increase walking speed. It was also found that, compared with men, women generally increase their walking speed by increasing their step frequency more than step length. However, when in non‐compliance with signal indications, women increase their walking speed by increasing their step length more than step frequency. It was also found that older pedestrians do not significantly change their walking behavior when in non‐compliance with signal indications. Copyright © 2014 John Wiley & Sons, Ltd.     

Modeling the interactions between car and bicycle in heterogeneous traffic

In this paper, a new cellular automata model is proposed to simulate the car and bicycle heterogeneous traffic on urban road. To capture the complex interactions between these two types of vehicles, a novel occupancy rule is adopted in the proposed model to consider the variable lateral distances of mixed vehicular traffic. Based on massive simulations, microscopic fundamental diagrams under different bicycle densities are devised. With these, the bicycle's spilling behavior is then investigated and discussed. In order to reflect the interference of a bicycle on a car, the interference transformation from friction state to block state is modeled explicitly. Finally, different simulation results under different occupancy rules indicate that the constant and fixed occupancy rule adopted in the previous studies might lead to overestimation of car flux in the heterogeneous traffic flows with different bicycle densities. Copyright © 2013 John Wiley & Sons, Ltd.     

A new approach for improving the performance of freight train timetabling of a single-track railway system

A new approach for improving the performance of freight train timetabling for single-track railways is proposed. Using the idea of a fixed-block signaling system, we develop a matrix representation to express the occupation of inter- and intra-station tracks by trains illustrating the train blocking time diagram in its entirety. Train departure times, dwell times, and unnecessary stopping are adjusted to reduce average train travel time and single train travel time. Conflicts between successive stations and within stations are identified and solved. A fuzzy logic system is further used to adjust the range of train departure times and checks are made to determine whether dwell times and time intervals can be adjusted for passenger and freight trains at congested stations to minimize train waiting times. By combining manual scheduling expertise with the fuzzy inference method, timetable efficiency is significantly improved and becomes more flexible.     

Vulnerability analysis for large-scale and congested road networks with demand uncertainty

To assess the vulnerability of congested road networks, the commonly used full network scan approach is to evaluate all possible scenarios of link closure using a form of traffic assignment. This approach can be computationally burdensome and may not be viable for identifying the most critical links in large-scale networks. In this study, an “impact area” vulnerability analysis approach is proposed to evaluate the consequences of a link closure within its impact area instead of the whole network. The proposed approach can significantly reduce the search space for determining the most critical links in large-scale networks. In addition, a new vulnerability index is introduced to examine properly the consequences of a link closure. The effects of demand uncertainty and heterogeneous travellers’ risk-taking behaviour are explicitly considered. Numerical results for two different road networks show that in practice the proposed approach is more efficient than traditional full scan approach for identifying the same set of critical links. Numerical results also demonstrate that both stochastic demand and travellers’ risk-taking behaviour have significant impacts on network vulnerability analysis, especially under high network congestion and large demand variations. Ignoring their impacts can underestimate the consequences of link closures and misidentify the most critical links.     

Estimating the robustness of questionnaire results: lessons from a mixed-mode survey of expectations for tele-working and road-based business travel

The robustness of questionnaire results to various forms of bias are explored in the context of a dual-mode (web and hardcopy) survey of employers’ anticipations of levels of employee commuting and business travel activity under a range of future ICT scenarios. The questionnaire incorporated several innovative features which, together with the dual-mode format, allowed an unusually wide range of analyses. For example: the robustness of respondents’ opinions was tested by examining the effect of incorporating alternative versions of a briefing text, one being very positive and one very negative, about the role of ICT; instrument bias was identified via detailed comparison of the results from the two versions of the questionnaire; and the impact of exogenous factors which are often ignored or taken as constant was assessed via special supplementary questions. Analysis showed that the robustness of opinions and expectations varied and was influenced by respondent characteristics, and that results from the two versions of the questionnaire differed significantly. It is concluded that opinions and expectations are less robust, and questionnaire results are more subject to bias and myopic interpretation, than is generally recognised and that web-based surveys seem particularly vulnerable to sampling bias. Methods are suggested for measuring robustness, for reducing bias and for validating and contextualising results. The use of contrasting briefing texts is recommended as a means of establishing the robustness of opinions and expectations while supplementary questions are recommended for validating and contextualising SP and SE exercises.

Identifying optimal data aggregation interval sizes for link and corridor travel time estimation and forecasting

With the recent increase in the deployment of ITS technologies in urban areas throughout the world, traffic management centers have the ability to obtain and archive large amounts of data on the traffic system. These data can be used to estimate current conditions and predict future conditions on the roadway network. A general solution methodology for identifying the optimal aggregation interval sizes for four scenarios is proposed in this article: (1) link travel time estimation, (2) corridor/route travel time estimation, (3) link travel time forecasting, and (4) corridor/route travel time forecasting. The methodology explicitly considers traffic dynamics and frequency of observations. A formulation based on mean square error (MSE) is developed for each of the scenarios and interpreted from a traffic flow perspective. The methodology for estimating the optimal aggregation size is based on (1) the tradeoff between the estimated mean square error of prediction and the variance of the predictor, (2) the differences between estimation and forecasting, and (3) the direct consideration of the correlation between link travel time for corridor/route estimation and forecasting. The proposed methods are demonstrated using travel time data from Houston, Texas, that were collected as part of the automatic vehicle identification (AVI) system of the Houston Transtar system. It was found that the optimal aggregation size is a function of the application and traffic condition.

Planning considerations for preservation and use of the national seashores

This article reviews the historical development of the category of national park known as “national seashore,”; and traces the evolution of basic planning and management policies that are applied to such areas. Also reviewed is the current sequential approach applied by the National Park Service in all its planning efforts, including a discussion of the impact of the National Environmental Policy Act on park planning. Several examples are provided to illustrate a variety of planning problems common to the sashore environment. Finally, comments are provided on the future promise of seashore and barrier island conservation and development, as well as the future role of other agencies and private organizations.     

Examining the influence of firm performance on business risk-taking and the mediation effect of scale of operations in the container terminal industry

Container shipping and its related service sectors help accelerate globalization of the world economy. This industry has been experiencing rapid growth, prompting container terminal operators to increase their handling capacity in response. Providing container terminal services requires substantial capital investment in physical assets such as cargo handling facilities and information systems. On the other hand, operating container terminals is a long-term investment that typically spans several business cycles. Hence prudent asset management using appropriate tools is critical for container terminal operators to sustain their businesses. Generally, due to risk-adverseness, investors are unwilling to take more risk in their investment unless they can reap a higher return. Contrary to this argument, this study finds no direct influence of better firm performance as a proxy of higher return on business risk-taking by container terminal operators. Instead, scale of operations is positively associated with business risk-taking, suggesting that container terminal operators with a larger scale of operations are willing to take more business risk.     

Developing green fleet management strategies: Repair/retrofit/replacement decisions under environmental regulation

The considerable cost of maintaining large fleets has generated interest in cost minimization strategies. With many related decisions, numerous constraints, and significant sources of uncertainty (e.g. vehicle breakdowns), fleet managers face complex dynamic optimization problems. Existing methodologies frequently make simplifying assumptions or fail to converge quickly for large problems. This paper presents an approximate dynamic programming approach for making vehicle purchase, resale, and retrofit decisions in a fleet setting with stochastic vehicle breakdowns. Value iteration is informed by dual variables from linear programs, as well as other bounds on vehicle shadow prices. Sample problems are based on a government fleet seeking to comply with emissions regulation. The model predicts the expected cost of compliance, the rules the fleet manager will use in deciding how to comply, and the regulation’s impact on the value of vehicles in the fleet. Stricter regulation lowers the value of some vehicle categories while raising the value of others. Such insights can help guide regulators, as well as the fleet managers they oversee. The methodologies developed could be applied more broadly to general multi-asset replacement problems, many of which have similar structures.