The MEPLAN models of Bilbao,Leeds and Dortmund

A trio of closely related land‐use/transport interaction models was developed using Marcial Echenique & Partners’ software package MEPLAN. The models were for the cities of Bilbao, (Spain), Dortmund (West Germany) and Leeds (England). All were calibrated using data drawn from earlier studies. The three models were used to predict the effects (relative to a base case) of a common programme of land‐use and transport policies or scenarios. This paper explains briefly the theoretical basis of the MEPLAN package as applied to urban models such as these three; describes the types of policies that have been assessed; and presents some of the key results.     

Cooperative path following control of UAV and USV cluster for maritime search and rescue北大核心CSCD

［Objectives ］ This paper studies a three-dimensional (3D) cooperative path-following control problem in the process of maritime search and rescue for a heterogeneous unmanned cluster system composed of unmanned aerial vehicles (UAVs) and unmanned surface vehicles (USVs).［Methods ］ First, kinematic models of the UAVs and USVs are established under a fixed coordinate system and body coordinate system. In order to design a 3D path-following controller suitable for motion control, an air coordinate system is established, and the path tracking error models of the UAVs and USVs are established in the Serret-Frenet coordinate system. Next, a 3D line-of-sight (LOS) guidance law is designed at the kinematic level, and a cooperative path-following control method suitable for heterogeneous clusters of marine vehicles is proposed, allowing the UAVs and USVs to track the preset parameterized path. Finally, the stability of the control system is analyzed based on the Lyapunov stability theory.［Results］The simulation results verify the effectiveness of the proposed cooperative path-following control method for heterogeneous clusters of marine vehicles.［Conclusions］The results of this study can provide references for maritime search and rescue by using the proposed cooperative path-following control method. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Evaluation and implications of environmental charges on commercial flights

Environmental charges are one of the economic instruments for controlling externalities. Their application to commercial flights has become a preferred method of encouraging the sustainable development of the air transport industry. Two kinds of externalities, aircraft noise and engine emissions, both generating profound impacts on human beings and on the environment, are considered here. The hedonic price method is applied to calculate the social cost of aircraft noise during the landing and take-off stages of the flight. The marginal impact of each flight with specific aircraft/engine combinations is derived for the allocation of aggregate noise social costs. In contrast, the dose - response method is applied to estimate the social cost of each engine exhaust pollutant during different flight modes. The combination of aircraft noise and engine emissions social costs is then evaluated on the basis of several environmental charge mechanism scenarios, using Amsterdam Airport Schiphol as a case study. It is shown that the current noise or engine emissions related charges at airports are lower than the actual social costs of their respective externalities. The implications of charge mechanism scenarios are subsequently discussed and evaluated in terms of their impacts on airline costs, airfares and passenger demand.     

Logistics and supply chain management

In this paper an introduction to the principles and methods used in logistics and supply chain management is presented. It begins by a discussion on fundamentals and explains the relevant terms. Next policy and practice associated with logistics and freight services are regarded with a focus on the EU policy for the sector which greatly influences the development of logistics chains and services. Mathematical formulation of typical transport and logistics-related problems is also presented followed by a discussion on the concept of sustainability.     

Hinterland strategies of port authorities: A case study of the port of Barcelona

Port authorities generally focus on the development of the local port area and play a minor role in the development of port hinterlands, whereas shippers, forwarders, barge and rail operators have always been involved in the port-hinterland connection. The increasing importance of intermodal hinterland networks for the competitive position of ports has urged port authorities to become active in the hinterland. This new role has already been suggested by different academics. However, limited empirical evidence exists of port authorities taking stakes in inland terminals or developing transport services. Barcelona, as one of the leading port authorities in this respect, is used as a case study in this paper. The case study provides insight in the components and execution of the hinterland strategy of Barcelona. It shows that the strategy of the port authority of Barcelona and the consequent active involvement in the hinterland has had a significant impact on attracting container volumes from distant hinterlands and improving the accessibility of the port.     

Experimental investigation of TARMAX model for modeling of hydrodynamic forces on cylinder-like structures

A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous (ARMAX) input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this paper, the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input and outputs, respectively. The experimental data, used in this study, were collected from a full-scale rough vertical cylinder at the Delft Hydraulics Laboratory. The practicality of the proposed method and also its efficiency in structural modeling were demonstrated through applying two hydrodynamic force components. For this purpose, an ARMAX model is first used to capture the dynamics of the process, relating in-line forces provided by water waves;secondly, the TARMAX model was applied to modeling and analysis of the lift forces on the cylinder. The evaluation of the lift force by the TARMAX model shows the model is successful in modeling the force from the surface elevation.     

Experimental and numerical investigation of fuel mixing effects on soot structures in counterflow diffusion flames

Experimental and numerical analyses of laminar diffusion flames were performed to identify the effect of fuel mixing on soot formation in a counterflow burner. In this experiment, the volume fraction, number density, and particle size of soot were investigated using light extinction/scattering systems. The experimental results showed that the synergistic effect of an ethylene-propane flame is appreciable. Numerical simulations showed that the benzene (C₆H₆) concentration in mixture flames was higher than in ethylene-base flames because of the increase in the concentration of propargyl radicals. Methyl radicals were found to play an important role in the formation of propargyl, and the recombination of propargyl with benzene was found to lead to an increase in the number density for cases exhibiting synergistic effects. These results imply that methyl radicals play an important role in soot formation, particularly with regard to the number density.     

Advanced hybrid energy storage system for mild hybrid electric vehicles

Hybrid electric vehicles (HEV) utilize electric power and a mechanical engine for propulsion; therefore, the performance of HEVs is directly influenced by the characteristics of the energy storage system (ESS). The ESS for an HEV generally requires high power performance, long cycle life, reliability and cost effectiveness; thus, a hybrid energy storage system (HESS) that combines different types of storage devices has been considered to fulfill both performance and cost requirements. To improve the operating efficiency and cycle life of a HESS, an advanced dynamic control regime in which pertinent storage devices in the HESS can be selectively operated based on their status is presented. Verification tests were performed to confirm the degree of improvement in energy efficiency. In this paper, an advanced HESS with a battery management system (BMS) that includes an optimal switching control function based on the estimated state of charge (SOC) is presented and verified.     

On-road assessment of in-vehicle driving workload for older drivers: Design guidelines for intelligent vehicles

There has been recent interest in intelligent vehicle technologies, such as advanced driver assistance systems (ADASs) or in-vehicle information systems (IVISs), that offer a significant enhancement of safety and convenience to drivers and passengers. However, the use of ADAS- and IVIS-based information devices may increase driver distraction and workload, which in turn can increase the chance of traffic accidents. The number of traffic accidents involving older drivers that are due to distraction, misjudgment, and delayed detection of danger, all of which are related to the drivers’ declining physical and cognitive capabilities, has increased. Because the death rate in traffic accidents is higher when older drivers are involved, finding ways to reduce the distraction and workload of older drivers is important. This paper generalizes driver information device operations and assesses the workload while driving by means of experiments involving 40 drivers in real cars under actual road conditions. Five driving tasks (manual only, manual primarily, visual only, visual primarily, and visual-manual) and three age groups (younger (20–29 years of age), middle-aged (40–49 years of age), and older (60–69 years of age)) were considered in investigating the effect of age-related workload difference. Data were collected from 40 drivers who drove in a real car under actual road conditions. The experimental results showed that age influences driver workload while performing in-vehicle tasks.