Development of a fiber-reinforced plastic armrest frame for weight-reduced automobiles

This paper presents the design optimization process of a short fiber-reinforced plastic armrest frame to minimize its weight by replacing the steel frame with a plastic frame. The analysis was carried out with the equivalent mechanical model and design of experiment (DOE) method. Instead of considering the whole structure, it is divided into three simpler regions to reduce the complexity of the problem through examining its structural characteristics and load conditions. The maximum stress and deflection of the regions that carry the normal load are calculated by the analytical mathematical form derived from an equivalent model. The other regions loaded by contact stress are handled by FEM (finite element method), the DOE method, and the RSM (response surface model). To optimize the design variables in both cases, the object functions derived from these calculations are solved with a CAE (computer aided engineering) tool. This method clearly shows the mechanical and mathematical representation of structural optimization and reduces the computing costs. After design optimization, the weight of the optimum plastic-based armrest frame is reduced by about 18% compared to the initial design of a plastic frame and is decreased by 50% in comparison with the steel frame. Some prototypical armrest frames were also made by injection molding and tested. The research results fulfilled all of the design requirements.     

Effect of punch angle on energy absorbing characteristics of tube-type crash elements

As a crash energy absorber, a tube-type crash element (expansion tube) dissipates kinetic energy through the internal deformation energy of the tube and through frictional energy. In this paper, the effects of the variation of punch angles on the energy-absorbing characteristics of expansion tubes were studied by quasi-static tests using three punch angles (15°, 30°, and 45°). A finite element analysis of the tube expanding process (m = τ _max /K) was performed using a shear friction model to confirm the variation of the shear friction factor with respect to punch angles using the inverse method. Additional analyses were performed using angles of 20°, 25°, 35°, and 40° to study the effect of the punch angles on the internal deformation energy, frictional energy, and expansion ratio of the tubes. The results of the experiment and finite element analysis showed that the shear friction factor was inversely proportional to the punch angles, and a specific punch angle existed at which the absorbed energy and expansion ratio remained constant.     

Sideslip angle estimation considering short-duration longitudinal velocity variation

The accurate estimation of sideslip angle is necessary for many vehicle control systems. The detection of sliding and skidding is especially critical in emergency situations. In this paper, a sideslip angle estimation method is proposed that considers severe longitudinal velocity variation over the short period of time during which a vehicle may lose stability due to sliding or spinning. An extended Kalman filter (EKF) based on a kinematic model of a vehicle is used without initialization of the inertial measurement unit to estimate vehicle longitudinal velocity. A dynamic compensation method that compensates for the difference in the locations of the vehicle velocity sensor and the IMU in on-road vehicle tests is proposed. Evaluations with a CarSim™ 27-degree-of-freedom (DOF) model for various vehicle test scenarios and with on-road tests using a real vehicle show that the proposed sideslip angle estimation method can accurately predict sideslip angle, even when vehicle longitudinal velocity changes significantly.     

Proper PD steering assistance constant based on the driving situation

Proportional derivative (PD) steering assistance can greatly improve the control stability of a vehicle. However, for all PD steering methods, the discomfort associated with the need to continuously turn the steering wheel during cornering is significant. Because the steering return phenomenon of the steering wheel stop like this is not preferable, PD steering assistance should be extremely weak (almost 0) during normal cornering. Alternatively, during drift cornering, during which the grip area of the tires is exceeded, PD steering assistance is helpful because the driver has good control over counter-steering. Moreover, the use of PD steering assistance is preferable during lane changes because the response and settling of a vehicle is greatly improved when PD steering assistance is used. Based on these considerations, a previous report examined steering method controls in which the PD steering assistance constant was incorporated along with the drivers’ perception changes in certain driving situations. This study aimed to determine a suitable PD steering assistance constant in relation to the driving situation. A proper PD steering assistance constant was found to exist for specific driving situations. Based on the results of gaze detection using an eye mark recorder, the study was able to reduce the right and left difference of the gaze at the driver by controlling PD steering assistance using a proper PD steering assistance constant for various driving situations.     

Structural design of an outer tie rod for a passenger car

This study proposes a structural design method for an outer tie rod installed in a passenger car. The weight of the outer tie rod is optimized by using the aluminum alloy Al6082M, which is developed as a steel-substitute material, and applying structural optimization techniques. The high strength aluminum with improved mechanical properties was developed to reduce the weight of the outer tie rod. The newly developed aluminum alloy Al6082M is applied as the material of the outer tie rod. The static strength due to inertia force, durability and buckling performances are considered in the structural design of the outer tie rod. At the proto design stage of a new outer tie rod, it is cost-effective to utilize FE (finite element) analysis to predict each of these performances. In addition, the current trend in the structural design of automobile parts is to use optimization techniques to reduce the weights of the parts. First, for an arbitrary base design, the static strength, the life cycle and the buckling load are calculated to check whether the design satisfies its criteria. Then, the critical performance is selected so as to include its loading condition only in the optimization process. In this study, the metamodel based optimization process using kriging is adopted to obtain the minimum weight satisfying the critical design requirement. Then, the feasibility of the determined optimum shape is investigated against the other performances. Finally, the optimum design of outer tie rod is modified by considering forging efficiency. The performances of the final design are investigated through simulation and experiment.     

Development of a hardware in the loop simulation system for electric power steering in vehicles

In this paper, a hardware-in-the-loop simulation (HILS) system was developed before the development of an electric power steering (EPS) system in a vehicle. This study was focused on the establishment of the HILS system. Driving conditions are simulated with the HILS system. The actual steering input parameters are confirmed on the monitor while driving the HILS system. The steering forces observed in the simulation with the developed HILS system are similar to those in real vehicle tests. The developed HILS system can be applied in the development of various types of EPS systems.     

A simplified model for evaluating tire wear during conceptual design

In the field of vehicle dynamics, commercial software can aid the designer during the conceptual and detailed design phases. Simulations using these tools can quickly provide specific design metrics, such as yaw and lateral velocity, for standard maneuvers. However, it remains challenging to correlate these metrics with empirical quantities that depend on many external parameters and design specifications. This scenario is the case with tire wear, which depends on the frictional work developed by the tire-road contact. In this study, an approach is proposed to estimate the tire-road friction during steady-state longitudinal and cornering maneuvers. Using this approach, a qualitative formula for tire wear evaluation is developed, and conceptual design analyses of cornering maneuvers are performed using simplified vehicle models. The influence of some design parameters such as cornering stiffness, the distance between the axles, and the steer angle ratio between the steering axles for vehicles with two steering axles is evaluated. The proposed methodology allows the designer to predict tire wear using simplified vehicle models during the conceptual design phase.     

Road identification in monocular color images using random forest and color correlogram

This paper presents a system to identify road and non-road regions from monocular color images of paved and unpaved roads. Despite being a single object, the road in these images is subject to large changes in appearance due to environmental effects and track materials. This condition has challenged the practical application of road identification. The proposed system combines random forest with color correlogram to overcome such conditions and offers a classifier for road and non-road regions in traffic images. As a color feature, the color correlogram depicts the spatial correlation of color changes in an image. Using random forest, road identification is formulated as a learning paradigm. The combined effects of color correlograms and random forest create a robust system capable of identifying roads even in variable situations in real time. This combination is more effective than other combinations, such as a color histogram plus random forest, a color correlogram plus neural network, or a color histogram plus neural network.     

Effect of the fuel injection strategy on first-cycle firing and combustion characteristics during cold start in a TSDI gasoline engine

The first firing cycle is very important during cold-start for all types of spark ignition engines. In addition, the combustion characteristics of the first firing cycle affect combustion and emissions in the following cycles. However, the first-cycle fuel-air mixing, combustion and emissions generation within the cylinder of a two-stage direct-injection (TSDI) engine during cold start is not completely understood. Based on the total stoichiometric air-fuel ratio and local richer mixture startup strategy, the first-cycle firing and combustion characteristic at cold start were investigated in a two-stage direct injection (TSDI) gasoline engine. In addition, the effects of the first injection timing, second injection timing, 1st and 2nd fuel injection proportion and total excess air ratio on the in-cylinder pressure, heat release rate and accumulated heat release were analyzed on the basis of a cycle-by-cycle analysis. It is shown that a larger 2nd fuel injection amount and later 2nd injection timing are more beneficial to the firing of the first cycle in the case of a total excess air ratio of 1.0. The optimum 1st and 2nd injection timing fuel injection proportions are 120°CA ATDC during the intake stroke, 60°CA BTDC during the compression stroke and 1:1. In addition, the firing boundary is a 2nd injection timing later than 90°CA BTDC during the compression stroke in the case of the 1st injection timing from 60°CA to 180°CA ATDC during an intake stroke and involves a 1st and 2nd fuel injection proportion of 1:1 and an excess air ratio of 1.0. The study provides a detailed understanding of cold-start combustion characteristics and a guide for optimizing the reliable first-cycle firing at cold start.     

New metal fitting geometry and optimization of the swaging parameters for an automobile power steering hose

To solve the power steering (PS) hose oil leakage problem in automobile applications, a new geometry design of the metal fitting is required, and the swaging conditions applied to the PS hose should be optimized. In this study, a new metal fitting geometry for the PS hose was proposed. A CAE simulation for both the proposed and the conventional metal fittings was conducted, and both the stress and the strain in the PS hose were compared. An experimental verification was also performed with these two different metal fittings. Additionally, the swaging conditions were optimized by the durability cycle time, which was measured in an impulse test of the swaged PS hose. For a more economical production, practical working conditions were also recommended and experimentally verified.