High speed driving stability of passenger car under crosswind effects

The driving stability of a passenger car at high-speed and under crosswind conditions is affected by aerodynamic characteristics as well as their dynamic characteristics, suspension, and weight distribution. In this study, the total measuring system was thought up to understand the transient vehicle dynamics and aerodynamics with driver’s control inputs all together. The test results were taken from a full-scale wind tunnel test, a crosswind generator test and an on-road test. We investigated major aerodynamic parameters that affect the driving stability of passenger cars under crosswind effects such as overtaking, passing each other, natural crosswind, etc. The reaction rate of high-speed stability will be improved when we minimize the total lift, side force and especially the yawing moment.     

Design of automotive headlamp with high-power LEDS

A novel vehicle headlamp low beam system is presented. The optical system is composed of three identical cells to ensure enough illumination. A poly-ellipsoid reflector and a aspherical lens are used to concentrate the rays and a baffle is employed to produce the cut-off line. The optical performance shows a good agreement with the requirement for headlamp in Chinese national standard. The smart constant current driver sustains automotive headlamps?requirements, moreover it has high power efficiency. The performance of three kinds of cooling systems with different structures are simulated and evaluated by FloTHERM software. Then a loop heat pipes combined with fins cooling system is manufactured for cooling the designed LED headlamp. It can greatly improve the cooling efficiency. Even in the 80°C environmental temperature, it can meet the working requirements of LED headlamp low beam system, so it is a kind of feasible cooling scheme.     

Alternatives in assigning short‐term counts to seasonal adjustment factor groupings

The precise estimation of the annual average daily traffic (AADT) is a task of significant interest for many transportation authorities and Departments of Transportation. In this study, three methods are developed to improve the assignment of short‐term counts to seasonal adjustment factor (SAF) groupings: the traditional functional classification, a discriminant analysis (DA), and a new statistical approach based on a weighted coefficient of variation (WCV). The data analyzed within this study are generated from all available continuous counters within the State of Ohio between 2002 and 2006. The analysis is conducted using SAFs that are separately calculated for the total volume and the directional specific volumes of a site. The results show that the directionally based assignment errors are statistically lower at a 95% confidence interval when compared with those generated by the total volume analysis. It is also found that the hourly time‐of‐day factors are more important in the assignment process than the average daily traffic. The directionally based WCV produces a decline in the average mean absolute percentage error (MAPE) over the roadway functional classification by 58% and in the standard deviation of the absolute error (SDAE) by 70%. On the contrary, the directionally based DA lowers the MAPE and the SDAE by 35% and 60%, respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Emerging organizational values in shipping: Part 4. Decentralization—the redefinition of authority in shipping company organization

Decentralization is a major theme of organizational change in shipping. It is often seen as ‘putting power back aboard ship’. However, the authors argue that this view is too simple. Decentralization poses fundamental questions about the entire management structure of the shipping company. The redistribution of authority necessary for decentralization is discussed in terms of the company organization structure.     

Capacity Building for Integrated Coastal Management in Asia-Pacific: The Case for Case Studies

Development of awareness and capacity is a central component to the delivery of ICM and spans from local communities to national-level politicians. Education and training activities associated with ICM must be extremely varied to match both the existing capacity and role that the stakeholders play within the process of ICM. Consequently, there cannot be considered any effective “generic” ICM training; training must be tailored to match the requirements of target groups. The transfer and uptake of good-practice thus becomes an important aspect of quality enhancement in ICM capacity development. Six case studies from the Asia-Pacific region are presented that show diverse and innovative examples of good practice. A comparative analysis of these case studies is carried out in terms of institutional level of impact. In addition a generic systems-based evaluation framework is used to determine the extent to which the training impacts upon ICM implementation indicators. It is concluded that the exchange, transfer, and translation to local conditions of appropriate good practice in ICM capacity development can be an important element in enhancing the impact of ICM programs on the coastal environments and societies. Furthermore, there appears to be a positive link between the involvement of national/state/regional stakeholders in capacity-building initiatives and impacting a wider variety of indicators of ICM delivery.     

Experimental investigation of TARMAX model for modeling of hydrodynamic forces on cylinder-like structures

A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous (ARMAX) input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this paper, the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input and outputs, respectively. The experimental data, used in this study, were collected from a full-scale rough vertical cylinder at the Delft Hydraulics Laboratory. The practicality of the proposed method and also its efficiency in structural modeling were demonstrated through applying two hydrodynamic force components. For this purpose, an ARMAX model is first used to capture the dynamics of the process, relating in-line forces provided by water waves;secondly, the TARMAX model was applied to modeling and analysis of the lift forces on the cylinder. The evaluation of the lift force by the TARMAX model shows the model is successful in modeling the force from the surface elevation.     

Sideslip angle estimation considering short-duration longitudinal velocity variation

The accurate estimation of sideslip angle is necessary for many vehicle control systems. The detection of sliding and skidding is especially critical in emergency situations. In this paper, a sideslip angle estimation method is proposed that considers severe longitudinal velocity variation over the short period of time during which a vehicle may lose stability due to sliding or spinning. An extended Kalman filter (EKF) based on a kinematic model of a vehicle is used without initialization of the inertial measurement unit to estimate vehicle longitudinal velocity. A dynamic compensation method that compensates for the difference in the locations of the vehicle velocity sensor and the IMU in on-road vehicle tests is proposed. Evaluations with a CarSim™ 27-degree-of-freedom (DOF) model for various vehicle test scenarios and with on-road tests using a real vehicle show that the proposed sideslip angle estimation method can accurately predict sideslip angle, even when vehicle longitudinal velocity changes significantly.     

Structural design of an outer tie rod for a passenger car

This study proposes a structural design method for an outer tie rod installed in a passenger car. The weight of the outer tie rod is optimized by using the aluminum alloy Al6082M, which is developed as a steel-substitute material, and applying structural optimization techniques. The high strength aluminum with improved mechanical properties was developed to reduce the weight of the outer tie rod. The newly developed aluminum alloy Al6082M is applied as the material of the outer tie rod. The static strength due to inertia force, durability and buckling performances are considered in the structural design of the outer tie rod. At the proto design stage of a new outer tie rod, it is cost-effective to utilize FE (finite element) analysis to predict each of these performances. In addition, the current trend in the structural design of automobile parts is to use optimization techniques to reduce the weights of the parts. First, for an arbitrary base design, the static strength, the life cycle and the buckling load are calculated to check whether the design satisfies its criteria. Then, the critical performance is selected so as to include its loading condition only in the optimization process. In this study, the metamodel based optimization process using kriging is adopted to obtain the minimum weight satisfying the critical design requirement. Then, the feasibility of the determined optimum shape is investigated against the other performances. Finally, the optimum design of outer tie rod is modified by considering forging efficiency. The performances of the final design are investigated through simulation and experiment.     

Development of a hardware in the loop simulation system for electric power steering in vehicles

In this paper, a hardware-in-the-loop simulation (HILS) system was developed before the development of an electric power steering (EPS) system in a vehicle. This study was focused on the establishment of the HILS system. Driving conditions are simulated with the HILS system. The actual steering input parameters are confirmed on the monitor while driving the HILS system. The steering forces observed in the simulation with the developed HILS system are similar to those in real vehicle tests. The developed HILS system can be applied in the development of various types of EPS systems.