The impact of oil supply bases on the economy of Shetland

In this paper the effects on the economic output, income and employment relating to Shetland are considered using an input—output model. The results are presented on the basis of an individual industry and appropriate multipliers are derived.     

Ride Quality and Dynamics of Rail Vehicle Models for Microcomputers

This paper describes mathematical and computer models for ride quality and dynamics of rail vehicles developed for running on personal computers. The purpose of the computer simulations is for prediction of ride quality in order to study the dynamic stability of the system and the effect of track quality and irregularities on ride quality.

In deriving the equations of motion for dynamic stability, the tangential forces acting on the contact areas between the wheels and rails are of fundamental importance in railway vehicles dynamics and are included in the analysis [1]. These forces are due to the creep phenomenon between the wheel and the rail on which it is rolling. Track irregularities are defined in terms of four components consisting of gauge, cross level, alignment and vertical surface profile [2]. Relation of allowable track irregularities versus speed is given by the FRA Track Safety Standards. Analytical representation of track irregularities should include both PSD (Power Spectral Density) for CWR (Continuous Welded Rail) as well as discrete inputs from track joints.

In this paper, the rail vehicle suspension analysis and dynamics mathematical and computer models are described. The computer models are written in Fortran 77 and designed to run on personal computer. The paper also discusses programming considerations that must be taken into account when programming for microcomputers under DOS (IBM's Disk Operating System) and MS or RM Fortran Compilers. Most of the considerations are however, valid in general with respect to engineering software development and programming for microcomputers.

Computer graphics is a powerful tool for visualization of the resulting solutions such as the display of the characteristic roots for the eigenvalues solution on a root locus plot and representation of acceleration levels versus the “Reduced Comfort Boundary” limits defined by the International Standards Organization” (ISO 2631-1985). In this paper some examples of these resulting outputs are presented and their significance discussed.     

Fatigue analysis for a multi-lap spot welded joint of high strength steel using quasi static tensile-shear test

The welding quality of spot weldment is an important factor that significantly affects the strength, stiffness, safety, and other performance characteristics of vehicles. Therefore, quality control and fatigue life evaluation of spot weldment are necessary processes. This paper presents a method for determining the fatigue life of multi-lap spot weldment of a high strength steel sheet. In this method, the fatigue life is estimated using the lethargy coefficient, which is the total defect coefficient according to rupture stress and time obtained by the quasi static tensile-shear test. The DC potential drop method was used to check initiation and propagation of cracks in addition to the test. Also, in this study, we modified the lethargy coefficient by using the welding current. Furthermore, we define a specific lapping constant, which is a characteristic constant of 2 or 3 lap weldments. The fatigue life obtained by the fatigue estimate equation, which contains a specific lapping constant was compared and verified with an experimental value. Finally we analyzed the relation of lap number, welding current and fatigue life. This method can save processing time and cost for predicting the life cycle of a structure.     

Effects of the fuel injection ratio on the emission and combustion performances of the partially premixed charge compression ignition combustion engine applied with the split injection method

Currently, due to the severity of world-wide air pollution by substances emitted from vehicles, emission control is being enforced more strictly, and it is expected that the regulation requirements for emission will become even more severe. A new concept combustion technology that can reduce the Nitrogen oxides (NOx) and PM in relation to combustion is urgently required. As a core combustion technology among new combustion technologies for the next generation engine, the homogenous charge compression ignition (HCCI) is expanding its application range by adopting a multiple combustion mode, a catalyst, direct fuel injection and partially premixed charge compression ignition combustion using the split injection method. This paper used a split injection method in order to apply the partially premixed charge compression ignition combustion method without significantly altering engine specifications of the multiple combustion mode and practicality by referring to the results of studies on the HCCI engine. Furthermore, the effects of the ratio of the fuel injection amount on split injection are investigated. From the test results, the adequate combination of the ratio of the fuel injection amount for the split injection method has some benefit on exhaust and fuel economy performance in a naturally aspirated single cylinder diesel engine.     

Development of the brake system design program for a vehicle

It is quite challenging to estimate the braking performance of a vehicle because the brake system is comprised of many parts, including a booster, master cylinder, and caliper. Calculation of characteristics such as braking force through vehicle tests requires much time and money. Therefore, the development of a method to estimate the braking performance of a vehicle using qualitative methods is beneficial. In this study, a program that can analyze the braking capabilities of a vehicle such as pressure, efficiency, and pedal travel is presented. The increase in disc temperature during braking as well as the properties of various boosters can be calculated using the proposed program. Dynamic characteristics of a vehicle equipped with a Load Sensing Proportional Valve (LSPV) were computed more precisely by obtaining the change in valve pressure according to the displacement of a suspension system. Since all input and output files are composed in the Microsoft Excel format, both design data management and database construction can easily completed.     

Experimental study on macroscopic spray characteristics after impingement in a slit-type GDI injector

In this paper, an experimental study on the wall-impinging spray of the slit-type GDI injector is presented. To examine the effects of various factors on the development of a spray impinging on the wall, experiments were conducted at various injection pressures, ambient pressures, wall distances from the injector tip, wall temperatures, and wall inclination angles. Behavior of the impinging spray was visualized using a planar laser scattering method. It is shown that the spray path penetration of the wall-impinging spray increases with increases in injection pressure, wall distance, wall temperature, or wall angle. On the other hand, the spray path penetration of the wall-impinging spray decreases with increases in ambient pressure. The predicted spray path penetration calculated by the empirical equation estimates the spray path penetration in all cases, and the empirical equation is optimized for the total injection pressure.     

Investigation on the flow and heat transfer characteristics of diesel engine EGR coolers

An important goal in diesel engine research is the development of a means to reduce the emissions of nitrogen oxides (NOx). The use of a cooled exhaust gas recirculation (EGR) system is one of the most effective techniques currently available for reducing nitrogen oxides. Since PM (Particulate Matter) fouling reduces the efficiency of an EGR cooler, a tradeoff exists between the amount of NOx and PM emissions, especially at high engine loads. In the present study, we performed engine dynamometer experiments and numerical analyses to investigate how the internal shape of an EGR cooler affects the heat exchanger efficiency. Heat exchanger efficiencies were examined for plain and spiral EGR coolers. The temperature and pressure distributions inside these EGR coolers were obtained in three dimensions using the numerical package program FLUENT.     

Experimental investigation of nozzle cavitating flow characteristics for diesel and biodiesel fuels

This study was performed to clarify criteria for cavitation inception and the relationship between flow conditions and cavitation flow patterns of diesel and biodiesel fuels. The goal was to analyze the effects of injection conditions and fuel properties on cavitating flow and disintegration phenomena of flow after fuel injection. To accomplish this goal, it was utilized a test nozzle with a cylindrical cross-sectional orifice and a flow visualization system composed of a fuel supply system and an image acquisition system. In order to analyze the rate of flow and injection pressure of the fuel, a flow rate meter and pressure gauge were installed at the entrance of the nozzle. A long distance microscope device equipped with a digital camera and a high resolution ICCD camera were used to acquire flow images of diesel and biodiesel, respectively. The effects of nozzle geometry on the cavitating flow were also investigated. Lastly, a detailed comparison of the nozzle cavitation characteristics of both fuel types was conducted under a variety of fuel injection parameters. The results of this analysis revealed that nozzle cavitation flow could be divided into four regimes: turbulent flow, beginning of cavitation, growth of cavitation, and hydraulic flip. The velocity coefficient of diesel fuel was greatly altered following an increase in flow rate, although for biodiesel, the variation of the velocity coefficient relative to the rate of flow was mostly constant. The cavitation number decreased gradually with an increase in the Reynolds number and Weber number, and the discharge coefficient was nearly equal to one, regardless of cavitation number. Lastly, it could not observe cavitation growth in the tapered nozzle despite an increase in fuel injection pressure.