Train-Track Interaction and Mechanisms of Irregular Wear on Wheel and Rail Surfaces

Summary High-frequency train-track interaction and mechanisms of wheel/rail wear that is non-uniform in magnitude around/along the running surface are surveyed. Causes, consequences and suggested remedies to relieve the problems are discussed for three types of irregular wheel/rail wear: (1) short-pitch rail corrugation on tangent tracks and large radius curves, (2) wheel corrugation as caused by tread braking, and (3) wheel polygonalisation. The state-of-the-art in modelling of dynamic train-track interaction in conjunction with prediction of irregular wear is reviewed.     

Distributed support modelling for vertical track dynamic analysis

The finite length nature of rail-pad supports is characterised by a Timoshenko beam element formulation over an elastic foundation, giving rise to the distributed support element. The new element is integrated into a vertical track model, which is solved in frequency and time domain. The developed formulation is obtained by solving the governing equations of a Timoshenko beam for this particular case. The interaction between sleeper and rail via the elastic connection is considered in an analytical, compact and efficient way. The modelling technique results in realistic amplitudes of the ‘pinned–pinned’ vibration mode and, additionally, it leads to a smooth evolution of the contact force temporal response and to reduced amplitudes of the rail vertical oscillation, as compared to the results from concentrated support models. Simulations are performed for both parametric and sinusoidal roughness excitation. The model of support proposed here is compared with a previous finite length model developed by other authors, coming to the conclusion that the proposed model gives accurate results at a reduced computational cost.     

Method for obtaining the wheel–rail contact location and its application to the normal problem calculation through ‘CONTACT’

This work presents a robust methodology for calculating inter-penetration areas between railway wheel and rail surfaces, the profiles of which are defined by a series of points. The method allows general three-dimensional displacements of the wheelset to be considered, and its characteristics make it especially suitable for dynamic simulations where the wheel–rail contact is assumed to be flexible. The technique is based on the discretisation of the geometries of the surfaces in contact, considering the wheel as a set of truncated cones and the rail as points. By means of this approach, it is possible to reduce the problem to the calculation of the intersections between cones and lines, the solution for which has a closed-form expression. The method has been used in conjunction with the CONTACT algorithm in order to solve the static normal contact problem when the lateral displacement of the wheelset, its yaw angle and the vertical force applied in the wheelset centroid are prescribed. The results consist of smooth functions when the dependent coordinates are represented as a function of the independent ones, lacking the jump discontinuities that are present when a rigid contact model is adopted. Example results are shown and assessed for the normal contact problem for different lateral and yaw positions of the wheelset on the track.     

软土刀具的磨损预测——一种研究刀具磨损系统中主要影响因素的新方法

硬岩隧道掘进机的性能很大程度上取决于其切削刀具的磨损情况。刀具的磨损会降低掘进速度,进而导致掘进时间延长、项目成本增加。通常在隧道项目的规划阶段使用预测模型来进行磨损预测,而常规的磨损试验对磨损系统的考虑还不够准确,并没有考虑到刀具/土体的相互作用、周围介质（水、膨润土）以及掘进过程中的荷载等因素。针对该问题,专门设计了一个水平放置的磨损试验设备。本文介绍了该试验方法,研究并讨论了磨损系统相关因素对磨损率的影响。结果表明,该设备可模拟真实的掘进过程,很好地解决了上述问题,达到了高效、准确预测磨损的效果。     

微注射成形实验与数值模拟

为研究注射料的流动性和模腔形状的复制能力,加工了含有微流道的模具,在微注射系统上进行了微注射实验.应用基于矢量化显式算法的程序,在不同壁面边界条件下,对微注射实验进行了模拟.结果表明:在注射料温度220 ℃、模具温度40 ℃、注射流量为20 mm3/s、注射时间1 s、保压时间10 s的注射工艺条件下,聚丙烯能较好的复制长5 mm,宽1.5 mm和厚0.8 mm的微流道形状.采用滑移边界条件的微注射模拟结果与实验结果一致,说明微注射中存在边界滑移速度.     

基于对称受限玻尔兹曼机的协同过滤算法

协同过滤算法在推荐系统中得到了广泛应用。其中具有代表性的是基于有向图模型的矩阵分解法和基于无向图模型的受限玻尔兹曼机。文中提出了一种基于对称受限玻尔兹曼机的协同过滤算法,该算法充分考虑并利用了推荐系统中用户和物品的对称性,通过对用户和物品分别建立了一个受限玻尔兹曼机,最后,采用回归算法对二者的结果进行融合处理。实验结果显示该方法与其他相关算法相比具有明显的优越性。     

Blue growth and ocean governance—how to balance the use and the protection of the seas

The economic value of the oceans and maritime industry is strongly gaining in importance. As the oceans are very large and particularly sensitive ecosystems, which need to be preserved, a balance between the use and the protection of the seas has to be found. On this issue, the paper presents some thoughts starting with a brief analysis of what to understand by maritime industry which is labeled as blue economy, and a recapitulation of the main threats for the marine environment, caused by blue economy. After that, some noteworthy prerequisites and criteria for finding a sound balance between the use and the protection of the seas will be highlighted, especially the need for sustainable ocean governance is put to discussion.     

���߽�ͨ���ź��Ż�����:�ع���ǰհ

概括地回顾了一些关于离线(或脱机)交通信号灯优化设计的方法.其中包括用于在孤立交叉口的单点和区域性的联动控制系统.离线方法在设计时一般利用已有调查出来的交通数据作为固定的输入资料，这个跟实时设计方法所要求的从感应器即时检浏出来的情况作为设计依据是有本质上的区别.但一般沿用的信号配时设计方法都需要依靠已刻在行车线道上(允许通行)的方向指示标志为设计基础，但这个方向指示在确定后在整个优化过程中是维持不变的，这就限制了交通流量在线道上的分布，从而大大减低配时的灵活性，在这样情况下优化出来的结果肯定不会是最好的.直至近期，以行车线道为基本单位的配时设计方法(英文名称为Lane-based method;中文可称为线道法)发展起来.这个方法是由传统的Phase-based method(相位法)所演变出来的.线道法不但包含所有相位法的特点，而且更能为原本受约束的线道和配时设计进行全面优化.线道法可在单点交叉口和区域性的联动控制系统上应用.文末提出一些未来研究发展的新方向.     

Application of genetic algorithms for joint optimization of signal setting parameters and dynamic traffic assignment for the real network data

This paper presents the joint optimization of signal setting parameters and dynamic user equilibrium (DUE) traffic assignment for the congested urban road network. The simulation-based approach is employed to obtain the DUE condition for the case of multiple-origin multiple-destination traffic flows. The dynamic traffic assignment simulation program (DTASP), developed in C language is used to assign the traffic dynamically on the road network, whereas method of successive averages (MSA) is modified and used to arrive at the DUE condition. The artificial intelligence technique of genetic algorithms (GAs) is applied to obtain the optimal signal setting parameters and path flow distribution factor for DUE condition. The methodology developed in such a way that joint optimization of signal setting parameters with DUE is obtained. The proposed method is applied to the real network data of Fort Area of Mumbai city comprising of 17 nodes and 56 unidirectional links with 72 Origin–Destination pairs, where all the 17 nodes are signalized intersections. The traffic flow condition for the optimized signal setting parameters is considerably improved compared to the existing signal settings. The results prove that the GA is an effective technique to solve the joint optimization problem for the real network data.     

Environmental innovation and the role of stakeholder collaboration in West Coast port gateways

The paper explores the role of stakeholder collaboration in the adoption of innovations as part of the environmental and sustainability agenda of port gateways. We do this through a comparative assessment of the port of Vancouver, British Columbia, and the twin ports of Los Angeles and Long Beach, California. An inductive research approach is used to identify and assess the initiation and implementation process behind exemplary innovations. Innovation includes new technologies and processes for handling and moving cargo, mechanisms for planning and policy making, as well as financing, implementing, upgrading, managing and operating infrastructure systems. A relatively new arena for competition on the basis of innovation concerns environmental performance. The conceptual framework and empirical evidence suggest that while there may be intense demand for and supply of innovation in port gateways, the complex dynamics of the logistics chain are such that successful innovation requires conscious involvement and collaboration of stakeholders.