Analysis of a large injection-molded body using knowledge-based flow process technology

A knowledge-based flow process is presented for large injection-molded body technology (LIMBT). Injection molding of a large body is a difficult technique because of the many factors and their interactions during the molding process. The proposed flow process can support LIMBT through integration of CAE(Computer-Aided Engineering), CAI (Computer-Aided Inspection), and monitoring systems. CAE and DOE (Design of Experiment) are used to construct an optimal mold design in terms of gates and runners and to identify working conditions for the molding process. CAI and monitoring systems with temperature sensors and pressure sensors can be used to inspect the physical molding process and the molded parts. The flow process of a large body is systematically planned and constructed using a knowledge-based flow process with DOE and computer-aided technologies. The proposed flow process is implemented for the molding process of an automobile front bumper fascia.     

Lateral controller design for an unmanned vehicle via Kalman filtering

This paper proposes a lateral control system for an unmanned vehicle that is designed to improve the responsiveness of the system with the use of a PD control. The vehicle heading error can be stabilized, and the transient response characteristics can be improved using the proposed controller. A mathematical model of the vehicle dynamics using two degrees of freedom was developed for the controller design. The waypoint tracking method for autonomous navigation was tested with incorporation of the Point-to-Point algorithm with position and heading measurements received from GPS receivers via Kalman filtering. The performance of the designed controller was verified through experiments with a real vehicle.     

Current sensorless drive method for electric power steering

This paper proposes a current sensorless drive method by using the mathematical modeling of a surface-mounted permanent magnet synchronous motor (SPMSM) and a dead-time compensation method to reduce the calculated current error caused by differences between real output voltages and voltage commands. The proposed method is implemented by using only a processor algorithm internally, i.e., without any voltage-sensing circuit hardware, such as filtering circuits and current sensor feedback circuits. To show the effectiveness of the proposed method, MATLAB simulations are carried out with an Electric Power Steering (EPS) System containing an SPMSM, a motor drive system and a mechanical gear system. The result shows the validity of the proposed method.     

Hydrodynamic hull form optimization using parametric models

Hydrodynamic optimizations of ship hull forms have been carried out employing parametric curves generated by fairness-optimized B-Spline form parameter curves, labeled as F-Spline. Two functionalities of the parametric geometry models are used in the present study: a constrained transformation function to account for hull form variations and a geometric entity used in full parametric hull form design. The present F-Spline based optimization procedure is applied to two distinct hydrodynamic hull form optimizations: the global shape optimization of an ultra-large container ship and the forebody hull form for the hydrodynamic optimization of an LPG carrier. Improvements of ship performance achieved by the proposed F-Spline procedure are demonstrated through numerical experiments and through correlations with experimental data. The ultra-large containership was built and delivered to the ship owner. The present study validates the effectiveness of the proposed hydrodynamic optimization procedure, ushering in process automation and performance improvement in practical ship design practices.     

Application of probability theory to marne project appraisal

The importance of specifying and quantifying the project risks in the investment decision process cannot be overemphasized. Even more so in the context of marine project appraisal, since the shiping markets are characterized by extreme volatility and high cyclicality. The use of probability theory in investment decisions is reviewed and applications are derived for marine projects. The paper focuses on the use of Monte Carlo simulation to determine the mean and variance of the input variables. Within the Monte Carlo framework three alternative methods are used for the construction of probability distributions; the scaled halves of a normal distribution, two unscaled parts of a normal distribution and finally use of altenative distributions, such as beta, gamma and chi-square. An alternative methodology is also drawn from the literature, namely the Pearson-Turkey three point approximation, to contrast with the Monte Carlo method.     

STUDY OF EFFECT OF SURFACE-OPTICAL PHONON ON BIPOLARON IN QUANTUM-WELL WIRE

ＳＴＵＤＹＯＦＥＦＦＥＣＴＯＦＳＵＲＦＡＣＥ┐ＯＰＴＩＣＡＬＰＨＯＮＯＮＯＮＢＩＰＯＬＡＲＯＮＩＮＱＵＡＮＴＵＭ┐ＷＥＬＬＷＩＲＥＣ．ＭＬｅ（李泽民）ＧｕＳｈｉｗｅｉ＊（顾世洧）Ｃ．ＣＬａｍ（林长净）（Ｄｅｐｔ．ｏｆＰｈｙｓｉｃｓａｎｄＭａｔｅｒｉａ...     

Consequences of service reduction in municipal transit: San Francisco’s muni

Urban transit in the United States is going through a crisis of rising costs, increasing fares, falling patronage, and concomitant service reductions; typical of the pattern is San Francisco’s Municipal Railway, the agency in charge of all the City’s transit. From a basic fare of 15c in 1969, two increases brought the fare to 25c by 1972, and cut sharply into a previously stable patronage. The “Muni”, in an effort to reduce costs and meet its budgeted deficit, attempted to reduce service by ten to fifteen percent. From an analysis of the data which could be obtained, it appears that neither efficiency not equity in the City would have been served by the proposed cutbacks. The analysis draws from a variety of sources and methods in exploring the interactions within the transportation system and within the city budget.     

A dynamic shortest path algorithm using multi‐step ahead link travel time prediction

In this paper, a multi‐step ahead prediction algorithm of link travel speeds has been developed using a Kalman filtering technique in order to calculate a dynamic shortest path. The one‐step and the multi‐step ahead link travel time prediction models for the calculation of the dynamic shortest path have been applied to the directed test network that is composed of 16 nodes: 3 entrance nodes, 2 exit nodes and 11 internal nodes. Time‐varying traffic conditions such as flows and travel time data for the test network have been generated using the CORSIM model. The results show that the multi‐step ahead algorithm is compared more favorably for searching the dynamic shortest time path than the other algorithm.     

The influence of route guidance advice on route choice in urban networks

The paper begins by reviewing what is known about route choice processes and notes the mismatch between this knowledge and the route choice assumptions embedded in the most widely used assignment models. Empirical evidence on the influence of route guidance advice on route choice is reviewed and, despite its limited nature, is seen to suggest that users are reluctant to follow advice unless they find it convincing and that, the more familiar they are with the network, the less likely they are to accept advice. Typically only a small minority of journeys are made in total compliance with advice.Results from an interactive route choice simulator (IGOR) are summarised and are seen to reveal that compliance depends on the extent to which the advice is corroborated by other factors, on the drivers' familiarity with the network and on the quality of advice previously received. It is noted that the IGOR results are in a form which would enable response models to be calibrated.Recent approaches to the modelling of route choice in the context of guidance are discussed. Some are seen to make simplifying assumptions which must limit the relevance of their results; most make no allowance for the fact that drivers are unlikely to comply with all advice and several are not able to represent the benefits which guidance might bring in the context of sporadic congestion or incidents.As an alternative, a two phase model comprising a medium term strategic equilibrium and a day-specific simulation with explicit representation of driver response is proposed.Updated and extended from an earlier version published in theProceedings of the Japan Society of Civil Engineers (JSCE No 425/IV-4, 1991-1).