Full vehicle simulation using thermomechanically coupled hybrid neural network shock absorber model

In the case of full vehicle models, the technique of multi-body simulation (MBS) is frequently used to study their highly non-linear dynamic behaviour. Many non-linearities in vehicle models are induced by force elements like springs, shock absorbers, bushings and tires. Commonly, spline functions are used to represent the force responses of these components. If the non-linear relationships are more complicated, the spline approximations are no more accurate. An alternative approach is based on empirical neural networks which are based on the mathematical approximation of measured data. It is well known that neural networks are able to represent and predict complex component responses accurately. The aim of this paper is to perform a dynamic full vehicle simulation using a thermomechanically coupled hybrid neural network shock absorber model. In this shock absorber model, the spline approach is combined with a temperature-dependent neural network. Based on a displacement-controlled excitation on a four post test rig in the ADAMS/Car MBS software, a rugged test track is simulated. In this way, the front and rear shock absorbers are dynamically loaded with comfort-relevant frequencies in the range of 0.75-30 Hz and velocity amplitudes up to 2 m/s. By the simulation, stability of the hybrid neural network model is demonstrated. Furthermore, the damping force, the vertical acceleration of the chassis and the required simulation times are compared. The standard spline approach is used as a reference.     

Assessment of diesel combustion noise overall level in transient operation

Combustion noise in passenger cars powered with direct injection (DI) diesel engines is frequently the main reason why end-users are reluctant to drive this type of vehicle. Thus, the great potential of diesel engines for environment preservation — due to their lower CO₂ emissions — could be missed. This situation worsens with the current design trends (engine downsizing) and the emerging new diesel combustion concepts (Homogeneous Charge Compression Ignition-HCCI, Premixed Charge Compression Ignition-PCCI, etc.), which are intrinsically noisy. This negative feature can be even more critical in transient operation due to the contribution of the temporal changes of both source and transmission path on engine noise. Therefore, combustion noise must be considered as an additional essential factor in engine development, together with performance, emissions and driveability. Thus, suitable evaluation procedures that can be integrated into the global engine development process in a timely and cost-effective manner are imperative. Regarding the evaluation procedures, most of the work available in the literature addressed combustion noise at steady operation. To surpass this limitation, two possible approaches — adapted from the classical and multiple regression methods — for the overall level assessment of combustion noise in transient conditions are evaluated in this paper.     

Longhaul feeder services in an era of changing technology: an Asia-Pacific perspective

Traditional liner carriers, operating in the highly competitive commercial environment of the last few years, have attempted to lower the marginal cost of each box carried. Technological improvements in both construction and propulsion systems have led to a steady growth in carrying capacity. Ships of 600+ TEUs are now in service and, as a result of this trend, have displaced 'smaller' ships from the major east-west trades. The more competitive environment of these trades has in turn led to a redeployment of ships in the 2500+ TEU range to the north-south trades. The result has been a rapid increase in north-south capacity, including feeder services and falling freight rates. Despite the current excess supply in shipping and historically low freight rates, significant developments in technology have created opportunities for new fast containerships. The paper analyses the key economic factors in the differentiation of the new fast ship technology from the traditionally designed containerships and demonstrates the potential financial viability to owners of these new 'greyhounds'.     

Identification of potential sites for deep-ocean waste isolation with a geographic site-selection model

Identification of optimal sites for the isolation of waste on the abyssal seafloor was performed with two approaches: by the traditional method of map overlays of relevant attributes, and by a specially developed, automated Site-Selection Model (SSM). Five initial, Surrogate Sites, identified with the map-overlay approach, were then compared with the more rigorously produced scores from the SSM. The SSM, a process for optimization of site locations, accepts subjective, expert-based judgments and transforms them into a quantitative, reproducible, and documented product. The SSM is adaptable to any siting scenario. Forty-one factors relevant to the isolation scenario, including 21 weightable factors having a total of 123 scorable categories, have been entered into the SSM. Factors are grouped under project definition, unique environments, anthropogenic, geologic, biologic, weather, oceanographic and distance criteria. The factor scores are linked to a georeferenced database array of all factors, corresponding to 1°×1° latitude–longitude squares. The SSM includes a total of 2241 one-degree squares within 1000 n.m. of the U.S. coasts, including the western North Atlantic, the Gulf of Mexico, and the eastern North Pacific. Under a carefully weighted and scored scenario of isolation, the most favorable sites identified with the SSM are on the Hatteras and Nares Abyssal Plains in the Atlantic. High-scoring sites are also located in the Pacific abyssal hills province between the Murray and Molokai Fracture Zones. Acceptable 1° squares in the Gulf of Mexico are few and of lower quality, with the optimum location on the northern Sigsbee Abyssal Plain. Two of the five Surrogate Site locations, on the Hatteras and Sigsbee Abyssal Plains, correspond to the best SSM sites in each ocean area. Two Pacific and a second Atlantic Surrogate Site are located in low-scoring regions or excluded by the SSM. Site-selection results from the SSM, although robust, are an initial attempt to quantify the site-selection process. The SSM database exposes a significant lack of high-quality information for many areally mappable attributes on the abyssal seafloor, particularly bottom-current speed and measures of biologic productivity and flux. Terminologies and classifications of some measures, such as sediment types, suffer from parochialism and vary by ocean. Considerable research is needed even for a broad understanding of the environmental measures required to make sound societal decisions about use of the abyssal seafloor for disposal or other purposes.     

Damage Accumulation in Rail Steel under Rolling with Slippage and Its Analysis

Experimental research results of surface damage accumulation in rail steel under rolling with slippage are presented. Hertz contact for two rollers made of rail and wheel steels was realized in the test. The influence of loading regime upon wear of rail is considered. The estimation of characteristics of surface fracture resistance for rail steel is made. The method to predict the life of rail steel under given conditions of regular loading is proposed.     

Management of coastal eutrophication: Integration of field data, ecosystem-scale simulations and screening models

A hybrid approach for eutrophication assessment in estuarine and coastal ecosystems is presented. The ASSETS screening model (http://www.eutro.org) classifies eutrophication status into five classes: High (better), Good, Moderate, Poor and Bad (worse). This model was applied to a dataset from a shallow coastal barrier island system in southwest Europe (Ria Formosa), with a resulting score of Good. A detailed dynamic model was developed for this ecosystem, and the outputs were used to drive the screening model. Four scenarios were run on the research model: pristine, standard (simulates present loading), half and double the current nutrient loading. The Ria Formosa has a short water residence time and eutrophication symptoms are not apparent in the water column. However, benthic symptoms are expressed as excessive macroalgal growth and strong dissolved oxygen fluctuations in the tide pools. The standard simulation results showed an ASSETS grade identical to the field data application. The application of the screening model to the other scenario outputs showed the responsiveness of ASSETS to changes in pressure, state and response, scoring a grade of High under pristine conditions, Good for half the standard scenario and Moderate for double the present loadings. The use of this hybrid approach allows managers to test the outcome of measures against a set of well-defined metrics for the evaluation of state. It additionally provides a way of testing and improving the pressure component of ASSETS. Sensitivity analysis revealed that sub-sampling the output of the research model at a monthly scale, typical for the acquisition of field data, may significantly affect the outcome of the screening model, by overlooking extreme events such as occasional night-time anoxia in tide pools.     

Analysis of the capabilities of a two-stage turbocharging system to fulfil the US2007 anti-pollution directive for heavy duty diesel engines

This article presents a two-stage turbocharged heavy-duty diesel (HDD) engine designed to fulfil the US2007 anti-pollution directive. This directive imposes very restrictive limits on the NOx and particle emissions of HDD engines. In this work, the possibility of combining particle traps in the exhaust line to reduce soot emissions with very high EGR rates to reduce NOx emissions is considered. This new generation engine implements two-stage turbocharging in order to improve the bsfc when the engine is working on steady conditions as well as to optimize the engine transient response. After carrying out the tests, the results were analyzed and the engine settings were adjusted to maximise its behaviour and minimise pollutant emissions. NOx and soot emission peaks were also analyzed at engine transient conditions in order to keep them under certain levels, and thus maintain the overall pollutant emissions to a level that is as low as possible. In summary, a double-stage turbocharging configuration can greatly improve engine driveability (between 23% and 36% depending on engine speed), while reducing NOx emissions during transient evolution without increasing opacity peaks beyond the stated limits.