Tractor-semitrailer model for vehicles carrying liquids

This article presents a model for solving solid-fluid interactions in vehicles carrying liquids. A tractor-semitrailer model is developed by incorporating suspension systems and tire dynamics. Owing to the solid-fluid interaction, equations of motion for the vehicle system are coupled. To simplify the complicated solution procedure, the coupled equations are solved separately using two different codes. Each code is analyzed separately; but as the parameters of the two codes depend on each other, the codes must be connected at the end of each time step. To determine the dynamic behavior of the system, different braking moments are applied. As the braking moments increase, braking time decreases. However, it turns out that increasing the braking moment to more than a certain level produces no significant results. It is also shown that vehicles carrying fluids need a greater amount of braking moments in comparison to vehicles carrying solids during braking. In addition, as the level of the fluid inside the tanker increases, from one-third to two-third of the tanker's volume, the sloshing forces applied to the tanker's walls increase. It was also concluded that the strategy used in this article to solve for the solid-fluid interaction by incorporating vehicle dynamic effects represents an effective method for determining the dynamic behavior of vehicles carrying fluids in other critical maneuvers.     

The delimitation of exclusive economic zones

In this paper Admiral Kapoor examines some of the problems relating to the delimitation of maritime boundaries, particularly that of exclusive economic zones, as they affect the hydrographic surveyor.     

Study of in-vehicle route guidance systems for improvement of right-side drivers in the Japanese traffic system

A country can adopt one of two standards for traffic flow — cars may travel on the left or right side of the road. When drivers who are accustomed to driving on the right side of the road drive on the left side, and vice versa, the mental workload is likely increased due to the driver’s unfamiliarity with a new language, the position of the driver’s seat, different driving directions, and other factors that differ from those of their home country. One method of doing this is to make sure that the in-vehicle route guidance information (RGI) is not overly complicated — thereby assisting drivers in improving their safety. Consequently, the aim of this study was to facilitate mobility and improve safety for natural right-side drivers driving temporarily in left-side traffic. In this study, driver behavior and workload — given various types of RGI — were evaluated in a driving simulator with a variety of prescribable test conditions. This research was composed of two experiments. In the first, various types of in-vehicle route guidance systems were tested and evaluated in terms of their characteristics and associated driver behaviors (while driving). In the second experiment, systemic factors and effectiveness were evaluated by two combined systems, arrow and map-type information, based on the results of the first experiment. In light of both experiments, the various types of route guidance systems were discussed in terms of their results. A navigation system was proposed to alleviate some of the secondary tasks such as route selection.     

全球形势回暖 中国汽车市场增长将放缓

中国动态市场在不断变化,但在变化中依然能抓住不变的本质。其实中国车市走的是成熟市场的发展道路,只是速度加快了。     

Evaluation of factors for carrier selection in the China Pearl River delta

The efficient integration of logistics modes is critical for international cargo shipping. The local transportation connecting to the export port then plays a vital role in such integration. This paper investigates the problems of carrier selection in the China Pearl River delta area, with respect to international shipping. The analytical hierarchy process (AHP) model is constructed based on a comprehensive industrial interviews and statistical analysis. Rather than simply ranking the given alternatives, we use AHP is used to analyse the weakness and strength of impacting factors in carrier selection. The model is implemented under different types of shipper. Seven criteria are statistically summarized from the questionnaire for evaluating eight different modes. The results are useful to those liner companies serving the PRD region in relationship to port selection and fleet deployment.     

The role of Mediterranean short sea shipping in the EU transport chain: The case of Greece

The European Community has provided valuable support to short sea shipping through various programs and legislation. This paper analyses the situation while focusing on the Mediterranean Sea and suggests solutions for addressing the short sea shipping problems in this special region. The biggest challenge for all sides in the comingyears will be the replacement of the existing fleet. The study presented herein gives an insightful and collective picture of the situation, while focusing on the Greek owned short sea vessels.     

A risk model for the operation of container vessels

Commercial shipping of containerized goods involves certain risks for human safety and environment. In order to actively manage these risks, they must be identified, analyzed, modeled, and quantified. This requires a systematical analysis of design and operation of container vessels. Within the EU-funded research project SAFEDOR, a Formal Safety Assessment has been applied to establish the current safety level of generic container ships and to identify potential cost-effective risk control options. This paper describes a structured approach to develop the underlying high-level risk model. It is structured as risk contribution tree consisting of a series of fault trees and event trees for the major accident categories. Statistical analysis of casualty data is used to estimate the probability of occurrence. Finally, the summation overall individual risk contributions yields the current risk pro file for the operation of container vessels is presented as FN-curve.     

Evaluating air emission inventories and indicators from cruise vessels at ports

This paper provides an estimation of air emissions (CO₂, NO_X, SO_X and PM) released by cruise vessels at the port level. The methodology is based on the “full bottom-up” approach and starts by evaluating the fuel consumed by each vessel on the basis of its individual port activities (manoeuvring, berthing and hoteling). The Port of Barcelona was selected as the site at which to perform the analysis, in which 125 calls of 30 cruise vessels were monitored. Real-time data from the automatic identification system (AIS), factor emissions from engine certificates and vessel characteristics from IHS Sea-web database were also collected for the analysis. The research findings show that the most appropriate indicators are inventory emissions per “port-time gross tonnage”, “port-time passenger” and “port time”. These emission indicators improve our understanding of cruise emissions and will facilitate the work that aims to estimate reliably and quickly the in-port ship emission inventories of cruise ports.     

Hybrid Electric Drive for DDG-51 Class Destroyers

The first of the Arleigh Burke class destroyers is nearing its mid-life. This class of ships was designed during the late 1970s through the 1980s to meet the threats that were prevalent at that time. Since entering service in 1991, these ships have shown themselves to be extremely versatile and the class now consists of nearly 60 ships in service. Their combat systems have been continually upgraded and adapted to meet the new threats the United States faces today. However, in order to keep these platforms viable throughout the first half of the 21st century, their operating costs must be reduced. Manpower, maintenance, and fuel are three of the top operating cost drivers. Most surface combatants spend very little of their underway time operating at full speed or even close to that. Over 1/3 of their underway time is spent at 12 knots and under. This is less than half of their maximum speed and only a fraction of the maximum power owing to the cubic speed–power relationship. Although the existing mechanical drive system is reasonably efficient, the main gas turbines are extremely inefficient at these very low power levels. A shaft-mounted auxiliary electric propulsion system (EPS) can take advantage of excess capacity in the ship service generators to reduce the main engine operating hours. Enabling bi-directional power flow from this auxiliary electric drive will provide additional generation capacity for ship service loads at a modest additional cost. It also provides a "cross-connect" capability from one shaft to the other. This paper will explore one prospect for reducing the operating cost of the DDG-51 class of ships by installing an auxiliary EPS that would powered by the ship service electrical plant. This additional system would serve to reduce both underway fuel usage as well as maintenance on the gas turbine main engines by reducing the number of operating hours on each engine. We will examine the technology trade-offs in this ongoing study.