粉煤灰地层浅埋大断面连拱隧道预加固方式研究

由于粉煤灰地层本身工程性质较差,隧道开挖时不同工序及支护方式的变化也极易影响掌子面的稳定及支护结构的安全.本文结合盐坪坝隧道埋深浅、跨度大、穿越不良地层粉煤灰地层的特点,对浅埋暗挖大断面隧道工程中常用的地层预加固方式做简要介绍并分析其适用性,结合现场实际,提出了一种适用于粉煤灰地层大断面连拱隧道的预加固技术,主要采用高压旋喷桩对穿越粉煤灰地段实施地表加固,从现场施工情况来看,盐坪坝隧道现已成功贯通,期间没有发生掌子面坍塌、地表沉陷等情况.     

A proposed vision and vehicle-to-infrastructure communication-based vehicle positioning approach

It is essential to obtain accurate location of vehicles for new applications of Intelligent Transportation Systems. To remedy the defects of present Global Positioning System and vehicle-to-infrastructure (V-I) positioning technology, a new positioning approach based on vision and V-I communication is proposed. This approach aims at lane-level positioning with lower cost than conventional ones. In this approach, the position of the vehicle is represented by its lateral position (the lane number) and longitudinal position (the distance from entrance of the road) in a course coordinate system along the road; the specific lane the vehicle is occupying (the lane number) can be judged using the information of lane lines detected by vision systems; then the distance to the vehicle is obtained by a Road Side Unit (RSU) during the V-I communication; and the longitudinal position is calculated. The error of the approach on typical operating conditions is analyzed, indicating that the new approach can achieve the accuracy of less than 0.31 m for straight road and 0.58 m for typical arc road with ultra-wideband communication and ranging technologies and rational arrangement of RSUs. The feasibility of this approach is presented.     

Development of knowledge based body structure concept design model

The purpose of this study is to propose a concept design process for an automotive body structure using technical information on the major joints and members of vehicles. First, in order to collect the technical information on major joints and members, 17 vehicles were selected using benchmark data. The collected technical information for the selected vehicles was the cross sectional shapes of each joint and member which were used for the analysis of joint stiffness, crashworthiness and static stiffness of the member to make a database along with cross section properties. This study applied a ‘What If Study’ technique to perform a concept design of an automotive body using the analyzed information and selected cross section meeting the design objectives. The criteria for the selection of the cross section were defined by subdividing the defined design objectives of an automotive body structure and constraints into members and joints. In order to configure an analysis model of an automotive body structure using the selected cross section, a shape parametric model was used and static stiffness, dynamic stiffness and crashworthiness were assessed to evaluate the configured automotive body structure. The evaluation result showed that the crashworthiness and static/dynamic stiffness were improved compared to an existing body structure. In addition, the weight of the body structure was reduced. Through this study, the process that can rapidly and effectively derive and evaluate the concept design of an automotive body structure was defined. It is expected that, henceforth, this process will be helpful for the study of automotive body structures.     

面向控制的SCR催化转化器温度模型

为了建立面向控制的SCR催化器温度模型,根据能量守恒和质量守恒方程并考虑热平衡中所涉及的换热过程不同,建立了4种SCR催化器温度的数学模型,并利用Matlab/Simulink构建图形化的计算模型。采用柴油机欧洲稳态循环(ESC)和欧洲瞬态循环(ETC)条件下的台架实测数据对模型进行检验,基于最大离散程度、拟合度和计算时间3个指标对模型进行评价和比较。结果表明,考虑催化器与废气和周围环境对流换热的温度模型具有良好的预测精度和实时性,更适合用于SCR控制策略。     

SMCP在海上VHF通信教学实践中的应用

有效的语言通信对船舶的安全航行和营运至关重要。根据IMO事故报告分析,通信不利是导致事故发生的重要因素之一。而缺乏使用SMCP的意识是通信不利的主要原因。文章主要介绍SMCP的结构和通信特征以及如何将SMCP应用到VHF通信的教学实践中去。     

体外大鼠成骨细胞对破骨细胞形成的影响

目的通过将鼠成骨细胞与破骨细胞直接共培养的实验方法,研究成骨细胞对破骨细胞分化及功能成熟的影响。方法按照M-CSF 30μg/L、RANKL 50μg/L的浓度对鼠骨髓单个核细胞诱导培养6 d,与原代培养3 d的鼠成骨细胞按细胞数量1∶1直接共培养,加入1,25-(OH)2D31×10-8mol/L和PGE21×10-6mol/L,利用形态学观察、TRAP染色、骨吸收陷窝检测等方法对共培养细胞进行鉴定。结果成骨细胞与破骨细胞共培养时,成骨细胞有明显的生长优势;染色后显微镜下可见大量呈单层排列的成骨细胞,偶见TRAP( )的破骨细胞。结论成骨细胞对破骨细胞分化及功能成熟的影响与两者的相对数量有关。本实验中,由于成骨细胞快速生长,当其数量多于破骨细胞时,可能使1,25-(OH)2D3对成骨细胞RANKL表达的上调作用不足,且PGE2对成骨细胞OPG表达的下调作用不足,从而主要表现为对破骨细胞形成及分化的抑制作用。     

彩色多普勒超声在动态监测移植肝及其并发症中的应用

目的探讨彩色多普勒超声在动态监测肝移植术后血流动力学变化及并发症诊治中的应用价值。方法回顾我中心107例原位肝移植术后应用彩色多普勒超声资料,汇总后行统计学分析。结果肝移植术后早期门脉流速较正常对照组升高,而肝动脉流速降低,后逐渐恢复正常。107例中发现肝动脉血栓形成2例(1.87%),肝动脉狭窄5例(4.67%),门脉血栓形成3例(2.80%),肿瘤复发7例(6.54%),诊断为急性排斥反应18例次(16.82%),慢性排斥反应10例次(9.34%),胸腔积液105例(98.13%),腹腔积液65例(60.74%),假性动脉瘤1例,胰漏1例,胆道感染4例(3.74%),胆道狭窄4例(3.74%),胆漏5例(4.67%),胆总管结石1例。结论彩色多普勒超声在动态监测肝移植术后血流动力学变化及并发症诊治中具有重要的临床意义。     

三甲益肝冲剂对实验性肝纤维化大鼠脂质过氧化的影响

目的观察三甲益肝冲剂对大鼠肝纤维化的作用并探讨与抗脂质过氧化有关的作用机制。方法雄性SD大鼠40只,随机分为模型组、复方丹参组、三甲益肝冲剂组和正常组。以二甲基亚硝胺(DMN)腹腔注射诱导大鼠肝纤维化模型,复方丹参组造模同时给予复方丹参灌胃,三甲益肝冲剂组造模同时给予三甲益肝冲剂灌胃,共4周。4周后处死大鼠取肝组织标本,光镜观察肝组织的病理变化,放射免疫法测定血清丙二醛(MDA)含量和超氧化物歧化酶(SOD)活性。结果与正常组比较,模型组肝组织Masson染色胶原纤维面积和血清MDA含量显著增加(P<0.05),而血清SOD活性明显下降(P<0.05);与模型组比较,三甲益肝冲剂组Masson染色胶原纤维面积和血清MDA含量显著下降(P<0.05),而SOD活性明显升高(P<0.05)。Masson染色胶原纤维面积和血清MDA含量表达呈正相关关系(r=0.435,P<0.05),与SOD活性呈负相关关系(r=-0.358,P<0.05)。结论三甲益肝冲剂具有良好的抗实验性大鼠肝纤维化作用,其主要作用机制与抗肝脏脂质过氧化损伤有关。