基于高温性能的沥青胶浆中消石灰掺量确定方法

沥青胶浆中消石灰掺量显著影响沥青混合料路用性能。该研究利用不同掺量的消石灰替换矿粉后配制沥青胶浆,进行软化点、动态剪切流变试验及粘度试验,研究消石灰对沥青胶浆高温性能,抗老化性能和施工和易性的影响,进而确定生产过程中消石灰掺配比例。结果表明,消石灰替换矿粉后,沥青胶浆高温性能有明显改善,但过量的消石灰会影响沥青混合料综合路用性能,故建议消石灰掺量不超过30%。     

城市高架桥下交叉口交通管理对策

以西安市为例,研究城市高架桥下交叉口的系统特征,总结其存在的问题,提出交通管理与改善对策,能达到提高通行效率、保障交通安全的目的。     

节能型双频段无线视频监控系统

针对市场上对兼容多频段无线监控系统的需求,设计并实现了一套节能型双频段无线监控系统,并对其中的关键技术新型结构的带通滤波器和混合型光伏发电系统实现方式进行了论述分析,给出了在工程中实用的设计方法,其测试结果显示该系统可有效的应用于无线视频监控中.     

Numerical simulation of multi-pass rolling force and temperature field of plate steel during hot rolling

Rolling force and temperature field are important parameters in the hot rolling process of plate steel. Most researchers use ANSYS/LS-DYNA and MSC.Marc to simulate the hot rolling process, however, software DEFORM-3D is not used widely in this field. Therefore, in this study, the commercially available finite element analysis software DEFORM-3D is used to simulate the distribution of rolling force, stress-effective, strain-effective and temperature field during the hot rolling process of plate steel with the size of 0.220m×2.070m×1.904m. Both the simulated rolling force and temperature of the multi-pass are compared with the measured results. It is shown that the simulated values by the finite element method are approximate to the measured values in the hot rolling of plate steel. So the simulation can provide an important reference and optimization to make rolling process and parameters in steel factory.     

Histologic changes in the sinus membrane after maxillary sinus augmentation with simultaneous implant placement using engineered bone graft material

The aim of the study was to analyze the histologic and ultrastructural changes after maxillary sinus augmentation with simultaneous implant placement using engineered bone graft material. In this study, calcium phosphate cement (CPC) scaffolds combined with goat bone marrow stromal cells (BMSCs) were used to fill goat sinus floor space after maxillary sinus floor elevation with simultaneous implant placement comparing with those not filled any grafted materials and used as controls. After a healing period of 3 months, the goat maxillary sinus membrane was examined using light microscopy and scanning electronic microscopy. The results showed that the connective tissue thickness and the epithelium thickness of mucosa were not statistically significant difference between two groups. The tissue engineered bone complex might be an ideal graft for the sinus floor elevation and have no influence on the sinus membrane under the histological and ultrastructural observation.     

Matlab/GUI在钢板弹簧悬架设计中的应用

对纵置对称式钢板弹簧进行了设计与计算,基于Matlab将设计过程程序化表示,建立了相应的图形用户界面,并将设计程序封装为独立运行的可执行程序,设计者可以快速的得到设计结果,便于多次重复计算与比较计算结果.     

关于整合建筑装饰制图和AutoCAD制图课程的探索

本文提出在高职教学中整合《建筑装饰制图》、《CAD制图》为《建筑装饰制图与CAD》一门课程,分析了整合课程的原因意义、整合课程的措施和方法。     

江西省公路货运量预测研究

分析各种货运量预测方法的优缺点,结合公路交通发展的特点,特别是公路货物需求的基础上,选用回归分析法、灰色预测法,对江西省公路货运量进行预测分析。通过灰色系统模型和线性回归的方法对江西省近9年的相关数据运用MATLAB进行分析,预测出江西省未来5年的公路货运量。     

三叶因子3在胃溃疡大鼠脾脏不同部位的表达

目的研究三叶因子3(TFF3)在胃溃疡大鼠脾脏不同部位的表达。方法胃前壁黏膜下注射冰乙酸制备大鼠胃溃疡模型,免疫组织化学法分别检测正常组(6只)和溃疡组(42只)雄性大鼠脾脏TFF3的表达。结果①溃疡组大鼠脾脏明显肿大、充血;与正常组相比白髓面积明显增大(P<0.05或P<0.01),至6 d组最大,边缘区增厚(P<0.05或P<0.01),至10 d组最厚;红髓面积减少。②TFF3阳性反应物呈棕黄色颗粒状分布于胞质中。③TFF3在正常组大鼠脾脏中呈弱阳性表达,在溃疡组表达明显增高(P<0.05或P<0.01)。溃疡组白髓中阳性细胞TFF3平均吸光度值各组与正常组相比明显增高(P<0.05),以10 d组增高最为明显;边缘区阳性细胞TFF3吸光度值1、2 d和6 d组与正常组相比明显增高(P<0.05或P<0.01),以6 d组增高最为明显;红髓阳性细胞TFF3吸光度值1、2、6 d和14 d组与正常组相比明显增高(P<0.05或P<0.01),以6 d组增高最为明显。④溃疡组边缘区TFF3表达与损伤时间呈负相关(P<0.05)。结论 TFF3在胃溃疡大鼠脾脏各部位呈高水平表达,可能通过提高脾脏免疫反应性促进胃溃疡的愈合。     

介入治疗前后局部晚期宫颈癌细胞中N-cadherin、E-cadherin的表达及其意义

目的检测介入治疗前、后局部晚期宫颈癌细胞中黏附分子N-cadherin、E-cadherin表达的变化,评价其对肿瘤转移和浸润的影响。方法采用免疫组织化学染色(SP)方法,检测14例介入治疗前后局部晚期宫颈癌患者癌细胞中E-cadherin和N-cadherin的表达情况。结果介入治疗前E-cadherin在局部晚期宫颈癌细胞中的阳性表达率为62.5%,N-cadherin的阳性表达率为100%。介入治疗后E-cadherin的阳性表达率增至100%,但表达增加无统计学意义(P>0.05);N-cadherin的阳性表达率下降为71.4%,表达下降有统计学意义(P<0.05)。结论介入治疗能够降低肿瘤细胞的间质表型分子N-cadherin的表达,有可能促进上皮表型分子标志物的正常表达,从而降低肿瘤的侵袭及浸润行为。