A non-geometrically similar model for predicting the wake field of full-scale ships

The scale effect leads to large discrepancies between the wake fields of model-scale and actual ships, and causes differences in cavitation performance and exciting forces tests in predicting the performance of actual ships. Therefore, when test data from ship models are directly applied to predict the performance of actual ships, test results must be subjected to empirical corrections. This study proposes a method for the reverse design of the hull model. Compared to a geometrically similar hull model, the wake field generated by the modified model is closer to that of an actual ship. A non- geometrically similar model of a Korean Research Institute of Ship and Ocean Engineering (KRISO)’s container ship (KCS) was designed. Numerical simulations were performed using this model, and its results were compared with full-scale calculation results. The deformation method of getting the wake field of full-scale ships by the non-geometrically similar model is applied to the KCS successfully.     

Experimental and numerical investigations on vibration characteristics of a loaded ship model

In this paper, vibration characteristics of the structure in the finite fluid domain are analyzed using a coupled finite element method. The added mass matrix is calculated with finite element method (FEM) by 8-node acoustic fluid elements. Vibration characteristics of the structure in finite fluid domain are calculated combining structure FEM mass matrix. By writing the relevant programs, numerical analysis on vibration characteristics of a submerged cantilever rectangular plate in finite fluid domain and loaded ship model is performed. A modal identification experiment for the loaded ship model in air and in water is conducted and the experiment results verify the reliability of the numerical analysis. The numerical method can be used for further research on vibration characteristics and acoustic radiation problems of the structure in the finite fluid domain.     

Numerical calculation of supercavitating flows over the disk cavitator of a subsonic underwater projectile

To deal with the effect of compressible fluids on the supercavitating flow over the subsonic disk cavitator of a projectile, a finite volume method is formulated based on the ideal compressible potential theory. By using the continuity equation and Tait state equation as well as Riabouchinsky closure model, an “inverse problem” solution is presented for the supercavitating flow. According to the impenetrable condition on the surface of supercavity, a new iterative method for the supercavity shape is designed to deal with the effect of compressibility on the supercavity shape, pressure drag coefficient and density field. By this method, the very low cavitation number can be computed. The calculated results agree well with the experimental data and empirical formula. At the subsonic condition, the fluid compressibility will make supercavity length and radius increase. The supercavity expands, but remains spheroid. The effect on the first 1/3 part of supercavity is not obvious. The drag coefficient of projectile increases as the cavitation number or Mach number increases. With Mach number increasing, the compressibility is more and more significant. The compressibility must be considered as far as the accurate calculation of supercavitating flow is concerned.     

使用有限元分析以改善重载运输车轴

分析了北美铁路货运发生的车轴故障,介绍了使用有限元对F级和K级车轴进行应力分析计算,研究车轴尺寸变化对应力的影响,并提出了改善重载车轴设计的建议.     

ISS-based robust adaptive fuzzy algorithm for maintaining a ship's track

This paper focuses on the problem of linear track keeping for marine surface vessels. The influence exerted by sea currents on the kinematic equation of ships is considered first. The input-to-state stability(ISS) theory used to verify the system is input-to-state stable. Combining the Nussbaum gain with backstepping techniques,a robust adaptive fuzzy algorithm is presented by employing fuzzy systems as an approximator for unknown nonlinearities in the system. It is proved that the proposed algorithm that guarantees all signals in the closed-loop system are ultimately bounded. Consequently,a ship's linear track-keeping control can be implemented. Simulation results using Dalian Maritime University's ocean-going training ship 'YULONG' are presented to validate the effectiveness of the proposed algorithm.     

Determinants of the property damage costs of bulk barge accidents

This study investigates determinants of the vessel, cargo, and other-property damage costs of bulk barge accidents in US inland waterways. Tobit estimation of a three-equation recursive model suggests that, in bulk barge accidents: (1) vessel damage cost is greater for collision, fire/explosion, and material/equipment failure accidents than for groundings; (2) cargo damage cost is greater at night and when the weather is foggy and increases with barge age; and (3) otherproperty damage cost is greater for multi-vessel accidents, but decreases with barge size. A dollar of vessel damage cost increases other-property damage cost by $1.38, while a dollar of cargo damage cost increases this cost by $6.90. An important result for formulating bulk barge accident cost-reduction policies is that a given determinant might have a negative effect on one type of damage cost but a positive effect on another.     

Institutional reform in ports of developing countries: the case of Lebanon—part I: the plan

Upon the expiry of the concession contract signed between Lebanon and a private company for the Port of Beirut operation (in December 1990), the Government appointed a temporary commission to operate the port under the rules of the expiring concession. The legality of this measure has since always been questioned, while the temporary commission underwent three major personnel changes which clearly prevented any long-term thinking or planning. In 1998, the temporary commission entered into a 20-year joint venture for the establishment of a container terminal. Meanwhile, Lebanon's two main ports were facing major regional competition, while competing against each other to some degree. Thus, the need became urgent to end the temporary status and propose reforms to the entire sector. To that end, the Ministry of Public Works and Transport was commissed by the Government to propose a permanent institutional framework for the port of Beirut while assessing the need for a national maritime sector regulator. This paper presents the recommendations for the institutional reform of the Lebanese maritime transport sector.     

Lagrangian flow in the California Undercurrent, an observation and model comparison

During the period 1992–1998, 38 isobaric RAFOS floats were deployed to sample the subsurface flow of the California Undercurrent. The deployments, released over the California continental slope west of San Francisco, have sampled robust year-round poleward subsurface flow associated with the Undercurrent most seasons and the combined inshore current and Undercurrent in winter. Two other types of flow have been seen: a region of weak flow with little net displacement just west of the California Undercurrent, and an active westward propagating eddy field. This eddy field appears to be the primary mechanism for moving floats from the Undercurrent into the ocean interior. The observations and statistics from the RAFOS floats are compared with Lagrangian estimates of particles tracked in a global high resolution ocean simulation in order to evaluate the fidelity of the model along an eastern boundary. The results show that the model reproduces the general character of the flow reasonably well, but underestimates both the mean and eddy energies by a substantial amount.     

Estimation of wave-induced ship hull bending moment from ship motion measurements

A time-domain technique for estimating wave-induced ship hull bending moment from ship motion measurements is presented. This technique is developed to improve hull response monitoring systems. Artificial neural networks are used to model the time-domain relationship between the wave-induced vertical bending moment and the coupled heave and pitch motions. The application of the proposed technique is validated using experimental data.     

Analysis of factors that may be essential in the decision to fly on fully autonomous passenger airliners

This research investigates factors that influence opinion in the decision to fly on fully autonomous passenger airliners primarily from the perspective of aviation and technology professionals. Bayesian statistical inference and a two‐level fractional factorial survey are used to sample passengers' views on fully autonomous airliners. Eight trust, safety, and cost factors are incorporated into a vignette set in the future. Factors include automation levels, safety records, liability guarantees, airline integrity, and service disruptions. Dependent variables exist in five post‐vignette questions and essentially ask “Would you” or “Would you not” be willing to fly on a fully autonomous airliner? Sixteen versions of the vignette, each with unique trust, safety, and cost levels, present varying (unknown) degrees of influence to the survey respondents. For every demographic, the research shows a 99% statistically significant difference between the “prior” and “posterior” sampled population proportions willing to fly. The most significant positive influence involves integrity characteristics of the airline, while the most negative influence relates to life insurance liability guarantees. Research from 2003 suggested that this mode of travel would be acceptable to only 10.5% of respondents. When the 2003 research is used as a Bayesian prior probability, the resulting posterior probability for the demographics sampled can be modeled as a beta distribution, indicating 95% probability that the sampled proportion of the population willing to fly is between 33.2% and 36.4%. After adjusting for age and profession demographics to match the US population, the 95% probability bounds on the proportion willing to fly are 31.35% and 34.15%. Copyright © 2015 John Wiley & Sons, Ltd.