我国无水港通关模式评价研究

无水港是近年来迅速发展的、与港口具有同样功能的"内陆港"。介绍了国内4个无水港港群发展的现状和我国目前无水港的通关模式。分析了无水港通关模式的优势和社会效益。指出了需要进一步解决的问题。     

Dynamics of suprabenthos-zooplankton communities around the Balearic Islands (western Mediterranean): Influence of environmental variables and effects on the biological cycle of Aristeus antennatus

Dynamics of suprabenthos and zooplankton were analyzed in two areas located in the NW (off Sóller harbour) and S (off Cabrera Archipelago) of Mallorca (Balearic Islands, western Mediterranean) at depths ranging between 135–780 m. Four stations situated respectively at 150 m (shelf-slope break), and at bathyal depths of 350, 650 and 750 m were sampled at bi-monthly intervals during six cruises performed between August 2003 and June 2004. Suprabenthos showed maximum biomass in both areas from late spring to summer (April to August), while minimum biomass was found in autumn (September–November). Though variable, temporal dynamics of zooplankton showed peaks of biomass in late winter and summer (February and June), while minimals occurred in autumn (August–September) and, at bathyal depths, in April. Suprabenthos (abundance; MDS analyses) showed a sample aggregation as a function of depth (3 groups corresponding to the shelf-slope break, upper slope — over 350 m; and the middle, deeper part of the slope — over 650–750 m), without any separation of hauls by season. By contrast, zooplankton samples were separated by season and not by depth. There was evidence of three seasonal groups corresponding to summer (June 2004–August 2003), autumn–winter (September and November 2003, February 2004), and spring (April 2004), being especially well established off Sóller. In general, suprabenthos was significantly correlated with the sediment variables (e.g. total organic matter content (% OM), potential REDOX), whereas zooplankton was almost exclusively dependent on Chl a at the surface, which suggests two different food sources for suprabenthos and zooplankton. The increase of suprabenthos abundance in April–June was paralleled by a sharp increase (ca. 2.8 times) in the %OM on sediment during the same period, coupled ca. 1–2 months of delay with the peak of surface Chl a recorded in February–March (from satellite imagery data). Suprabenthos biomass was also correlated with salinity close to the bottom, suggesting a link between suprabenthos abundance and changes in the oceanographic condition of water masses close to the bottom. It is suggested that a higher suprabenthos biomass recorded off Sóller in comparison to that off Cabrera in June could, in turn, be related to a seasonal inflow of Levantine Intermediate Water (LIW) in April–June in this area at mid bathyal depths (350–650 m). This trend would be based on: 1) it was evident only at mid-slope depths between 350–750 m, coinciding with the LIW distribution, and 2) it was not recorded among zooplankton (collected throughout the water column). The possible effect of the fluctuations of suprabenthos and zooplankton on higher trophic levels has been explored studying the diet and food consumption rates of the red shrimp Aristeus antennatus, as indicator species by its dominance in bathyal communities. A. antennatus increased its food consumption from February to April–June 2004 off Sóller, which in the case of large (CL > 40 mm) specimens was found in both areas. In addition, there was a shift of diet from winter to spring–early summer. In this last period, A. antennatus preyed upon euphausiids and mesopelagic decapods and fish, while benthos (e.g. polychaetes and bivalves) decreased in the diet. This indicates an increase in the food consumption and probably in the caloric content of the diet in pre-spawning females in April–June 2004, which is synchronized with the period when gonad development begins in A. antennatus females (May–June). Anyway, macrozooplankton, and not suprabenthos, is crucial as a high energetic food source in the coupling between food intake and reproduction in the red shrimp.     

Mortality through ontogeny of soft-bottom marine invertebrates with planktonic larvae

The present survey covers one spawning season of marine benthic invertebrates in a large geographical area, the inner Danish waters, and includes a wide range of habitats with steep salinity and nutrient load gradients. The loss ratios of soft-bottom marine invertebrates from one development stage to the next is calculated based on average abundances of pelagic larvae, benthic post-larvae and adults of Bivalvia, Gastropoda, Polychaeta and Echinodermata, with planktonic development. This gives a rough estimate of the larval and post-larval mortality. Loss ratios between post-larvae stage and adult stage (post-larval mortality) varies from 3:1 to 7:1 (71.2–84.9%) and loss ratios between larvae and post-larvae (larval mortality) and between larvae and adult, ranging from 7:1 to 42:1 (85.2–97.6%) and from 45:1 to 210:1 (97.8–99.5%), respectively. The results show a remarkable unity in loss ratios (mortality) between the mollusc taxa (Bivalvia and Gastropoda) at the phylum/class level. This similarity in loss ratios among the mollusc taxa exhibiting the same developmental pathways suggests that the mortality is governed by the same biotic and abiotic factors. Larval mortality is estimated to range from 0.10 d^− 1 to 0.32 d^− 1 for Bivalvia and ranging from 0.09 d^− 1 to 0.23 d^− 1 for Polychaeta. The species loss ratios combined with specific knowledge of the reproduction cycles give estimated loss ratios (mortality) between the post-larvae and the adult stage of 25:1 and 14:1 for the bivalves Abra spp. and Mysella bidentata. For the polychaete Pygospio elegans the loss ratio (larval mortality) between the larvae and the post-larval stage is 154:1 and between the post-larvae and the adult stage 41:1. For Pholoe inornata the loss ratio between post-larvae and adults is 7:1. The present results confirm that the larval stage, metamorphosis and settlement are the critical phase in terms of mortality in the life cycle for Bivalvia. Assuming steady state based on actual measurements of pelagic larval densities an estimated input to the water column of pelagic bivalve larvae is ranging from 10,930 to 17,157 larvae m^− 2 d^− 1 and for Polychaeta between 2544 and 3994 larvae m^− 2 d^− 1. These estimates seem to correspond to the reproductive capacity of the observed adult densities using life-table values from the literature.The potential settlement of post-larvae is 43 post-larvae m^− 2 d^− 1 for Bivalvia and 56 post-larvae m^− 2 d^− 1 for Polychaeta. The adult turnover time for Bivalvia is estimated to be 1.5 years and 2.1 years for Polychaeta. This exemplifies that species with short generation times may dominate in very dynamic transitional zones with a high frequency of catastrophic events like the frequent incidents of hypoxia in the inner Danish waters.     

基于组件技术的铁路大型客运站行车调度系统

根据客运站生产组织结构、数据流程和业务布局,将客运站行车调度系统划分为10个子系统。根据各子系统的功能和特点,采用客户端/服务器结构、浏览器/服务器2种体系结构。对系统进行组件设计,选定的中小粒度重用组件包括数据库操作组件、统计组件、查询组件等,提取的大粒度重用组件包括计划编制组件、现车场管理组件和调车作业计划管理组件等。根据组件的变化频率,将系统从纵向划分为数据库访问层、业务逻辑层、流程控制层和应用系统层4个层次。系统开发运用COM组件技术,采用MFC实现COM组件。该系统已开发完成并在成都站完成现场运行试验。     

Incorporating Logistics in Freight Transport Demand Models: State-of-the-Art and Research Opportunities

Freight transport demand is a demand derived from all the activities needed to move goods between locations of production to locations of consumption, including trade, logistics and transportation. A good representation of logistics in freight transport demand models allows us to predict the effects of changes in logistics systems on future transport flows. As such it provides better estimations of the costs of interaction and allows to predict changes in spatial patterns of freight transport flows more accurately. In recent years, the attention for freight modelling has been growing and new research work has appeared aimed at incorporating logistics in freight models. In this paper we review the state of the art in the representation of logistics considerations in freight transport demand models. Our focus is on the service and cost drivers of changes in logistics networks and how these affect freight transport. Our review proceeds along a conceptual framework for modelling that goes beyond the conventional 4-step modelling approach. We identify promising areas for freight modelling that have an integrative function within this framework, such as spatial computable general equilibrium models, supply chain choice models and hypernetwork models.     

Assessment of Cross‐Border Spillover Effects of National Transport Infrastructure Plans: An Accessibility Approach

Abstract

Traditional transport infrastructure assessment methodologies rarely include the full range of strategic benefits for the transportation system. One of these benefits is the contribution to cross‐border integration, critical for the European integration process. However, this is a key issue in strategic planning and decision‐making processes, as its inclusion may increase the probability of large‐scale transport infrastructure projects being funded. This paper presents a methodology for the measurement of the contribution of transport infrastructure plans to European integration. The methodology is based on the measurement of the improvement in network efficiency in cross‐border regions of neighbouring countries, via accessibility calculations in a Geographical Information System support. The methodology was tested by applying it to the ambitious road and rail network extensions included in the Spanish Strategic Transport and Infrastructure Plan (PEIT) 2005–2020. The results show significant and important network efficiency improvements of the PEIT outside the Spanish border. For the road mode, while the Spanish average accessibility improvement accounts for 2.6%, average improvements in cross‐border regions of France and Portugal are of 1.8%. And for the rail mode, the corresponding Spanish value is 34.5%, whereas in neighbouring regions it accounts for 20.2%. These results stress the significant importance of this strategic benefit and the consequent need for its inclusion in strategic planning processes. Finally, the paper identifies the potential of the methodology when applied at different administrative levels, such as the local or state levels.     

Introducing Willingness‐to‐pay for Noise Changes into Transport Appraisal: An Application of Benefit Transfer

Abstract

Numerous research studies have elicited willingness‐to‐pay values for transport‐related noise. However, in many industrialized countries including the UK, noise costs and benefits are still not incorporated into appraisals for most transport projects and policy changes. This paper describes the actions recently taken in the UK to address this issue, comprising: primary research based on the city of Birmingham; an international review of willingness‐to‐pay evidence; the development of values using benefit transfers over time and locations; and integration with appraisal methods. Amongst the main findings are: that the willingness‐to‐pay estimates derived for the UK are broadly comparable with those used in appraisal elsewhere in Europe; that there is a case for a lower threshold at 45 dB(A)Leq,18h rather than the more conventional 55 dB(A); and that values per dB(A) increase with the noise level above this threshold. There are significant issues over the valuation of rail versus road noise, the neglect of non‐residential noise and the valuation of high noise levels in different countries. Conclusions are drawn regarding the feasibility of noise valuation based on benefit transfers in the UK and elsewhere, and future research needs in this field are discussed.     

振捣机构对摊铺机熨平板力学性能的影响

为减小振捣机构对熨平板力学性能的影响,提高摊铺质量,通过建立摊铺压实机构模型和动力学微分方程,利用Matlab仿真分析振捣机构对熨平板的作用力。结果表明,前后振捣梁相位差、前后振捣梁振幅以及振捣频率对熨平板作用力有较大的影响;当选取前后振捣梁相位差为180°、前后振捣梁振幅相等以及低频振捣时,可大大降低振捣机构对熨平板的作用力。     

Fatigue assessment of rear axle under service loading histories considering the strengthening and damaging effects of loads below fatigue limit

Accurately predicting the fatigue life is the basis for the reliability and lightweight design of automobile parts. However, the predicted lives under service loadings on the basis of the S-N curve from constant amplitude loads from existing methods often seems conservative compared with real lives, because of ignoring the strengthening effect of loads below fatigue limit. In this paper, a fatigue damage model, which is modification of Miner’s Rule, was established for the fatigue assessment under service loadings by means of taking into account the strengthening and damaging effects of loads below fatigue limit. Then this model and conventional Miner’s Rule are applied to the estimate the fatigue life of a torsion beam rear axle using the loading history recorded on proving ground. Finally, verification tests are performed on MTS road load simulator test bed. Results of predicted lives and fatigue tests demonstrate that the accuracy of the predicted life could be greatly improved by taking into account the strengthening and damaging effect of loads below fatigue limit.     

Review on characterization of nano-particle emissions and PM morphology from internal combustion engines: Part 2

This paper presents a review of the characterization of physical properties, morphology, and nanostructure of particulate emissions from internal combustion engines. Because of their convenience and readiness of measurement, various on-line commercial instruments have been used to measure the mass, number, and size distribution of nano-particles from different engines. However, these on-line commercial instruments have inherent limitations in detailed analysis of chemical and physical properties, morphology, and nanostructure of engine soot agglomerates, information that is necessary to understand the soot formation process in engine combustion, soot particle behavior in after-treatment systems, and health impacts of the nano-particles. For these reasons, several measurement techniques used in the carbon research field, i.e., highresolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and Raman spectroscopy, were used for analysis of engine particulate matter (PM). This review covers a brief introduction of several measurement techniques and previous results from engine nano-particle characterization studies using those techniques.