国内外公交社区规划研究及经验借鉴

本文通过研究国内外相关文献,对公交社区涵义进行解读和界定,依据国内外公交社区的分类和形式,研究国内外公交社区的发展状况,尤其一些经典的优秀案例,最后总结公交社区规划的三大要素。     

如何在治堵大环境下进行公交线路提速

2013年浙江省各市开展全面治堵工作,其中提高公共交通的服务水平是交通治堵的重点工作,也是城市交通可持续发展的必经之路。公交服务水平的提高不仅追求量的发展,还要保证质的提升,而对公交线路进行提速就是提升公交服务品质的途径之一。本文在城市交通治堵的大环境下,利用治堵的压力和动力,借机调动大量资源,从公交系统内和公交系统外全面、系统、科学地对温州运量最大的前20条线路进行提速。通过方案的逐步落实,3条提速线路效果明显,城市交通也得到进一步改善。     

Measurements of Emissions to Air from a Marine Engine Fueled by Methanol

Emissions of exhaust gases and particulate matter from a dual fuel marine engine using methanol as fuel with marine gasoil as pilot fuel have been examined for ...     

Evaluation of marine radar as an ocean-wave-field detector through full numerical simulation

The importance of ocean waves parameters (propagation direction, mean period, significant wave height, etc.) is related to several aspects of a ships safety, efficiency in operation, routing, design, and maintenance. However, some available methods for obtaining those parameters have data limitations and inconvenient aspects. In severe weather conditions, an ocean-wave-field detector is necessary. This can provide two-dimensional ocean-wave-field information directly. Among other conventional methods, ship-borne wave radar has the ability to function as such a detector, and some researchers have tried to develop practical systems. A numerical approach using plan position indicator (PPI) images from conventional marine radars is proposed to retrieve valuable information from the ocean waves. A three-dimensional Fourier transform is applied to a set of consecutive radar PPI images to perform spectrum analysis. The removal of undesired elements in the spectrum is achieved by applying a hi-pass filter to remove static components, and by comparing the data with the expected dispersion shell to correct for nonocean-wave power. Numerical experiments under controlled conditions using simulated PPI images were performed through numerical simulations based on theoretical ocean-wave equations. The results include a comparison between the original wave parameters used in the simulation and the values retrieved from the spectrum analysis.     

Modelling behavioural rules for daily activity scheduling using fuzzy logic

The paper focuses on how trip time variability affects re-scheduling of daily activities. A delay in a trip or an early arrival can contribute to changes in the timing, location of the next activity, and to the deletion/addition of some activities. We propose the idea of using fuzzy logic rules to explain the effect of variability in travel time on the benefits perceived by an individual with the changes, and to model different actions that the individuals take in order to re-establish the steadiness of the existing timetable. The fuzzy model is used to handle the imprecision of the data which is unstructured text. The results show that large deviations in trip duration are more likely to induce significant changes in the timetable whereas small deviations are either ignored or translated into modified timing of the next activity. In choosing an action, greater importance is assigned to the flexibility of the following activity, to the magnitude of the trip time saving/delay, and to the duration of the next activity. Time savings are not favoured unless they can be readily transferred into additional activity time allocated to the next activity or to a new activity. The fuzzy rules based system is capable of predicting satisfactorily the strategy of coping with uncertainty in travel times and the satisfaction sensed with the change.     

Effect of width-to-thickness ratio and thickness profile changing on the critical instable shape during cold strip rolling

Based on the volume constancy with equal flow-per-second and elastic sheet stability theory, a coupling relationship among lateral thickness difference, width-to-thickness ratio of cold rolling strip steel under ideal and actual working conditions, and shape is concluded according to the comprehensive influence principle of various factors on the critical instable shape analyzed in-depth. Firstly, the influence model under actual working condition is developed by referring to the basic relationship between lateral thickness difference and shape under ideal condition. The test results prove that for thin strips with thickness below 0.3 mm, their lateral thickness differences have significant effect on the shape. After then, the combined influence of lateral thickness difference and width-to-thickness ratio on the critical instable shape is concluded according to the elastic sheet stability model, with the synthetic effect of these three factors analyzed. Test data indicate that for cold rolling strip steel with width-to-thickness ratio above 3 000, the critical instability stress difference decreases significantly. Actual measurements are conducted on the lateral thickness differences of two rolls of typical strip manufactured by a sixhigh cold mill, with the influence law of lateral thickness variation and width-to-thickness ratio comprehensively investigated. It is demonstrated that during the production of ultrathin strip steel with different width-to-thickness ratios, the loading roll shapes should be fine adjusted according to the lateral thickness difference of input strips.Therefore, the variation of lateral thickness difference of output strips can meet the requirement of shape stability,so as to obtain fine shape.     

Regression analysis of initial stress field around faults based on fault throw by displacement discontinuity method

The back analysis of initial stress is usually based on measured stress values, but the measuring of initial stress demands substantial investment. Therefore, amounts of underground engineering have no measured initial stress data, such as tunneling engineering. Focusing on this problem, a new back analysis method which does not need measured initial stress data is developed. The fault is assumed to be caused by initial load, the displacement discontinuity method (DDM) which considered non-linear fault is adopted to establish a numerical model of the engineering site, and the multivariable regression analysis of the initial stress field around the faults is carried out based on the fault throw. The result shows that the initial stress field around the faults is disturbed significantly, stress concentration appears in the tip zone, the regressive fault throw matches the measured values well, and the regressive initial stress field is reliable.     

Combining driver response with cyclical queue optimisation over selected corridors

A case study located in Auckland, New Zealand, was used to quantify the magnitude of savings that may result if the SCATS adaptive traffic control system contains an explicitly combined queue estimation and offset adjustment on a cycle‐by‐cycle basis. A validated SATURN traffic model was used to evaluate five scenarios that represent the short‐run and long‐run efficiency gains resulting from progressive signal adaption with an objective of queue minimisation on the main corridors. Optimisation was applied both area‐wide, and on selected arterial corridors, using a combined split/offset optimisation routine with responsive driver behaviour to achieve a network‐wide and corridor‐specific efficiency gain. The modelling heuristic evaluates the efficiency of both the Equisat and P₀ optimisation policies that would mimic a more progressive adaption of signals under SCATS. Results for the long‐run area‐wide optimisation can produce network‐wide travel‐time savings in the order of 20% and a reduction in transient queues of 28% if only selected corridors are optimised, with a 5% reduction in journey time over an average 8‐min journey. Copyright © 2016 John Wiley & Sons, Ltd.     

Willingness to accept commuting time within the household: stated preference evidence

In this study, stated preference data is used to derive estimated values of commuting time (VOCT). Both spouses in two-earner households are individually making trade-offs between commuting time and wage; both with regard to their own commuting time and wage only, as well as when both their own commuting time and wage and their spouse’s commuting time and wage are simultaneously changed. Thus, we are able to compare how male spouses and female spouses value each other’s commuting time. When only ones own commuting time and wage are attributes, the empirical results show that the estimated VOCT is plausible with a tendency towards high values compared to other studies, and that VOCT does not differ significantly between men and women. When decisions affecting commuting time and wage of both spouses are analyzed, both spouses value the commuting time of the wife highest. Further analysis show that this result is driven by households where the man has the highest income. If VOCT were to be gender specific in policy implications, the value might be higher for women than for men in two-earner households.