速度至230 km/h的有源调节受电弓的运行试验

用有源调节受电弓在Re 200型接触网下以最高230 km/h的速度试行.开发这种受电弓的目的是,在现有的接触网下能以高于设计速度运行;降低弓/网的磨损,增加其使用时间;降低高速时的噪声.     

Investigation of soot formation in Diesel-GTL fuel blends under quiescent conditions

In this study, a visual investigation of sprays and flames is performed, and soot formation in Diesel-GTL fuel blends is studied in a specially designed quiescent constant-volume chamber under various ambient gas temperatures and O₂ concentrations. Similar to the case of soot formation during diesel fuel combustion, the sooting zone during the mixing-controlled combustion of Diesel-GTL blends is located in the leading portion of the jet boundaries. Auto-ignition delay and soot concentration decrease with an increase of GTL content in the fuel blend. Soot also decreases with lower O₂ concentration, higher injection pressure, and lower ambient gas temperature. The lack of soot formation at lower O₂ concentrations and lower temperatures suggests that Diesel-GTL fuel blends can be successfully utilized in low-temperature diesel combustion technologies that are currently being developed. Furthermore, this mixing controlled combustion method with Diesel-GTL blends can be used to modulate various engine operation parameters, and therefore to simultaneously reduce the formation of soot and NOx within a wide range of diesel engine loads.     

Technology analysis and low-cost design of automotive radar for adaptive cruise control system

Recently, the advanced driver assistance system (ADAS), which helps mitigate car accidents, has been developed using environmental detection sensors, such as long and short range radar, lidar, wide dynamic range cameras, ultrasonic sensors and laser scanners. Among these detection sensors, radars can quickly provide drivers with reliable information about the velocity, distance and direction of a target obstacle, as well as information about the vehicle in changing weather conditions. In the adaptive cruise control system (ACCS), three radar sensors are usually needed because two short range radars are used to detect objects in the adjacent lane and one long range radar is used to detect objects in-path. In this paper, low-cost radar based on a single sensor, which can detect objects in both the adjacent lane and in-path, is proposed for use in the ACCS. Before designing the proposed radar, we analyzed the world-wide radar technology and market trends for ACCS. Based on this analysis, we designed a novel radar sensor for the ACCS using radar components, such as an antenna, transceiver module, transceiver control module and signal processing algorithm. Finally, target detection experiments were conducted. In the experimental results, the proposed single radar can successfully complete the detection required for the ACCS. In the conclusion, the perspective and issues in the future development of the ACCS radar are described.     

轻轨车辆噪声评价标准初探

根据轻轨车辆噪声的现状及特点,本文认为轻轨车辆的噪声仍以A声级评价为宜,但需规定容许的倍频程带声压值,以抑制低频噪声对人体的影响,同时提出了轻轨车辆噪声的控制标准。最后还指出了A声级评价总体的缺陷,建议应以人体工程学为基础,综合考虑噪声对人体的多方面危害,以制定出更完善的轻轨车辆噪声评价标准。     

An Internal State Variable Model for the Low Temperature Tempering of Low Alloy Steels

QuanitativelyaccuratePredictionsofquenchinduceddistOnionandresidualstressrelyontheabilitytopredictthemicrosthectUralevolUtionthroughOutthequenchProcess.InlowaIloysteels,cUrrenresearchMshavefOcusedontheformationldneticsoffetrite,pearlite,bainiteandmartensite.However,temPeringcanhavealargeinfluenceondistOnionandresidualstrCss,andeffortstoaccountforthislagbehindthemodelingofthePrimnyphasetransihons.AsafirststeptowardsaccountingfortemPerillg,wehavedevelOpedanintemalstatevariablemodelthatuses…     

破碎水平岩层地质条件下隧道钻爆法施工

在隧道施工中通过对水平岩层围岩压力进行实测,总结水平岩层隧道的围岩压力特点。依据水平岩层隧道围岩力学特性和初期支护作用原理,有针对性地调整初期支护参数,现场实施后通过监控量测对围岩和支护稳定性进行检验。依据地下水和破碎带对水平岩层的影响,总结破碎带地段水平岩层隧道施工技术措施,达到了快速、安全、经济施工,对类似工程有一定的借鉴和参考价值。     

Evaluation of low-temperature diesel combustion regimes with n-Heptane fuel in a constant-volume chamber

The concept of Low Temperature Combustion (LTC) has been advancing rapidly because it may reduce emissions of NOx and soot simultaneously. Various LTC regimes that yield specific emissions have been investigated by a great number of experiments. To accelerate the evaluation of the spray combustion characteristics of LTC, to identify the soot formation threshold in LTC, and to implement the LTC concept in real diesel engines, LTC is modeled and simulated. However, since the physics of LTC is rather complex, it has been a challenge to precisely compute LTC regimes by applying the available diesel combustion models and considering all spatial and temporal characteristics as well as local properties of LTC. In this paper, LTC regimes in a constant-volume chamber with n-Heptane fuel were simulated using the ECFM3Z model implemented in a commercial STAR-CD code. The simulations were performed for different ambient gas O₂ concentrations, ambient gas temperatures and injection pressures. The simulation results showed very good agreement with available experimental data, including similar trends in autoignition and flame evolution. In the selected range of ambient temperatures and O₂ concentrations, soot and NOx emissions were simultaneously reduced.     

Estimation of TKE dissipation rates in dense bottom plumes using a Pulse Coherent Acoustic Doppler Profiler (PC-ADP) — Structure function approach

During a hydrographic survey in January 2006 the spreading of inflowing saline water was observed in the Arkona Basin (Western Baltic Sea). Two bottom mounted ‘pulse coherent’ acoustic Doppler profilers (PC-ADP) were used to measure the near-bottom current field of the dense plume with a high temporal (1 s) and spatial resolution (5 cm). In order to estimate the dissipation rate of turbulent kinetic energy () a structure function approach was applied to the beam velocity data. Simultaneous measurements with a microstructure shear profiler (MSS) and an acoustic Doppler velocimeter (ADV) supplied independent data for the verification of the structure function method. Additional measurements with standard CTD, near-bottom towed and vessel mounted acoustic Doppler current profilers (ADCP) completed the data set.The estimated dissipation rates from the structure function approach fit well with the values derived from the ADV and the MSS probe. It is shown that the structure function approach is a reliable and easily applicable method to derive estimates of TKE dissipation rates from PC-ADP beam velocities. The observed dissipation rates ranged between 5 · 10^− 6 and 1 · 10^− 8 W kg^− 1 depending on the hydrographic conditions. Inside the plume the dissipation rates exceeded that of the overlaying brackish water by two orders of magnitude. Since the noise level of velocity data in pulse coherent mode is considerably lower than in the Doppler mode the PC-ADP can also be used for estimates in marine environments with low turbulence level. Reynolds stresses estimated from the PC-ADP and the ADV agreed well at the same depth level. TKE production derived from PC-ADP measurements compared reasonably well with the dissipation rate of TKE in a varying environment.