Analysis of the Stability of the Shield Tunnel Excavation Face Considering Fluid-Solid Coupling Effect北大核心CSCD

In order to study the impacts of the transient seepage on the stability of tunnel excavation face during the installation of lining segments, the fluid-solid coupling effect based numerical model of the tunnel excavation face was developed by the finite element software PLAXIS. With adoption of the variablecontrolling approach, the influences of the depth/diameter ratio (the ratio of the buried depth to diameter of the tunnel) and the support pressure ratio (the ratio of the face support pressure to water and soil pressures ahead of the excavation face) on the face stability and ground settlement were investigated, respectively. At same time, the failure modes of the excavation face under the fluid-solid coupling analysis were also discussed. The results show that:1) the transient seepage leads to the development of the soil arching at the front of the excavation face, in which the smaller deformation at the excavation face is achieved, and so less support pressure for the face stability is allowed. While for the plastic analysis without taking into account the effect of transient seepage, a higher support pressure is required to maintain the stability of the excavation face; 2) in the fluid-solid coupling analysis, the depth/diameter ratio has less impacts on the stability of the excavation surface, but has larger impacts on the ground settlement. The larger the depth/diameter ratio, the larger the ground surface settlement and the settlement profile; 3) however, with the combination of the decrease of the support pressure and the impact of transient seepage on the settlement of ground surface, the soil arching effect in front of the excavation face is gradually reduced. The deformation zone at the ground surface is then connected with the deformed part ahead of the tunnel face to form a wedge-shaped soil sliding zone. It is also observed that the wedge-shaped body tends to have a larger funnel-shaped failure mode than that in the plastic analysis without considering the transient seepage. The results show that the transient seepage has a great impact on the stability of tunnel excavation face in the soil condition with high permeability ratio. The fluid-solid coupling analysis should be adopted to evaluate the deformation of excavation face and ground settlement. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Model Test on Mechanism of Shear Resistance Borne by Concrete Shear Key and Friction of Element Joint of the Immersed Tunnel北大核心CSCD

By scale model tests, it proves the mechanism mode of shear resistance borne by friction of contact area and concrete shear key in different contact stress states and cushion thicknesses of shear key. The results show that friction plays a significant role on shear resistance of element joint. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

A dichotomous choice survey for quantifying option and non-use values of bus services in Korea

The total economic value for a transportation service consists of use, option, and non-use value. The use benefit is based on a traveler’s willingness to pay for usual consumption of the service. The optional value, on the other hand, is related to the possible use of the service for trips not yet anticipated or currently accommodated by other travel modes. The non-use value, however, is derived from the intrinsic merit of the service, even though a trip-maker never actually or potentially depends on the mode. A closed-ended contingent valuation method is considered for the quantification of the option and non-use values. A survey of single- and double-bounded dichotomous choices is conducted with a case study of South Korean bus operations. A logistic regression model and a survival analysis for the single- and double-bounded approaches, respectively, are applied. The estimation result is examined according to the statistical property required and the behavioral validity expected. In particular, three issues from the output are discussed. First, the results help to show the preferable framework between single- and double-bounded surveys for addressing an individual’s option and non-use values. Second, the differences in the absolute values of option and non-use values are compared. Thirdly, the relationship between trip-makers’ willingness to pay and the level of service of their primary travel modes are investigated. In conclusion, the summary of research and the possibilities for future studies are given.     

Modeling intermodal equilibrium for bimodal transportation system design problems in a linear monocentric city

This paper investigates the intermodal equilibrium, road toll pricing, and bus system design issues in a congested highway corridor with two alternative modes - auto and bus - which share the same roadway along this corridor. On the basis of an in-depth analysis of the demand and supply sides of the bimodal transportation system, the mode choice equilibrium of travelers along the continuum corridor is first presented and formulated as an equivalent variational inequality problem. The solution properties of the bimodal continuum equilibrium formulation are analytically explored. Two models, which account for different infrastructure/system regulatory regimes (public and private), are then proposed. In the public regulatory model, the road toll location and charge level are simultaneously optimized together with the bus service fare and frequency. In the private regulatory model, the fare and frequency of bus services, which are operated by a profit-driven private operator, are optimized for exogenously given toll pricing schemes. Finally, an illustrative example is given to demonstrate the application of the proposed models. Sensitivity analysis of residential/household distribution along the corridor is carried out together with a comparison of four different toll pricing schemes (no toll, first best, distance based, and location based). Insightful findings are reported on the interrelationships among modal competition, market regulatory regimes, toll pricing schemes, and urban configurations as well as their implications in practice.     

Micro-simulation modelling for traffic safety: A review and potential application to heterogeneous traffic environment

This paper critically reviews micro-simulation modelling applications for traffic safety evaluation with respect to the use of different simulation tools, the application of surrogate safety indicators under different aspects of road environments and crash considerations. General input variables used to develop the models; key parameters for crash prediction; and calibration and validation approaches are explored in the paper. The strengths and weaknesses of used simulation packages for traffic safety evaluation are also pointed out. Moreover, recent advancements in the development and application of traffic safety micro-simulation model for safety assessment are also discussed.Despite having a number of studies, there is still a significant void in the development and application of simulation model to evaluate traffic safety of non-lane based heterogeneous traffic environments that predominate in many developing countries. The paper assessed the potential application of traffic safety micro-simulation model in heterogeneous traffic environments. Finally, a number of potentially fruitful future research directions are highlighted.     

Effects of stack array orientation on fuel cell efficiency for auxiliary power unit applications

The commercial fuel cell products currently appearing on the market are self-contained fuel cell engines. These engines can be used for many applications that are presently dominated by internal combustion engines or batteries. Vehicle mounted fuel cell auxiliary power units have been attracting attention lately. Additionally, there is a market based incentive to use multiple small fuel cell arrays in place of a single large fuel cell for some applications. Typically, fuel cells are designed to operate as stand-alone units. This paper investigates the ability of small commercial stacks to operate in common array arrangements. Although an individual Nexa is able to produce 1500 W, Dual Nexas do not maintain that capability while in array configurations. With an overall load share ratio of 1.02:1 the series array reliably produced 2900 W of power, while with an overall load share ratio of 1.09:1 the parallel array reliably produced only 2800 W of power. This study shows that array orientation affects both system stack net efficiency and individual stack net efficiency. The information gained from this study may be helpful for fuel cell design and integration.     

Processing and fiber content effects on the machinability of compression moulded random direction short GFRP composites

The random direction short Glass Fiber Reinforced Plastics (GFRP) have been prepared by two compression moulding processes, namely the Preform and Sheet Moulding Compound (SMC) processes. Cutting force analysis and surface characterization are conducted on the random direction short GFRPs with varying fiber contents (25∼40%). Edge trimming experiments are preformed using carbide inserts with varing the depth of cut and cutting speed. Machining characteristics of the Preform and SMC processed random direction short GFRPs are evaluated in terms of cutting forces, surface quality, and tool wear. It is found that composite primary processing and fiber contents are major contributing factors influencing the cutting force magnitudes and surface textures. The SMC composites show better surface finish over the Preform composites due to less delamination and fiber pullouts. Moreover, matrix damage and fiber protrusions at the machined edge are reduced by increasing fiber content in the random direction short GFRP composites.     

Estimation of the adhesion force for a disc brake in a skid control condition

The performance of brakes has become important due to increased train speeds. The brake system of a train must possess a large brake force to stop the train safely within a limited stopping distance. However, an excessive brake force deteriorates the ride comfort and causes the train to skid. Therefore, it is necessary to control the brake force within the adhesion force limit. This paper presents an analytical method to estimate the relationship between the brake and adhesion forces of a disc brake system. This method has been applied to the actual disc braking control system of the Korea High-Speed Train (HSR350x), and the adhesion force is estimated in an actual skid condition.     

Model-based control of an electropneumatic brake system for commercial vehicles

A properly functioning brake system is critical for ensuring the safe operation of any vehicle on roadways. Commercial vehicles such as trucks, tractors-trailers and buses are equipped with an air brake system that uses compressed air as the energy transmitting medium. This paper presents a model-based control scheme for an electropneumatic brake system for use in commercial vehicles. A mathematical model for an electropneumatic brake system was developed and corroborated with experimental data. A control scheme was developed based on this model and was used to regulate the pressure of air inside the brake chamber according to a desired pressure trajectory. This control scheme was implemented on an experimental test bench, and its performance was studied for various values of the controller parameter. The control scheme was tested for various desired pressure trajectories reflecting actual brake operation.     

Digital human body model for seat comfort simulation

Using the recent anthropometry of the North American population, human body models were developed for seat comfort simulation. The external geometry of the models was acquired from the three-dimensional whole body laser scan of recruited volunteers in a driving position. The selection criteria for volunteers with standard size and shape were derived from a statistical factor analysis of the Size USA database. As a practical application of the model in a design process, comfortable driving postures were constructed by adopting the cascade prediction model (CPM), which takes into account both interior package layout and the driver’s anthropometry. The detail modeling process of finite element modeling and its validation results against volunteer measurements are introduced.