自动变速器故障的功能分析法

功能分析法，即是通过对变速器各部分结构元件工作原理的分析，了解它们在整个系统中的作用，在此基础上分析得出各结构元件失效将产生的后果，并将故障现象与可能的故障源建立一一对应的联系，最后总结归纳出故障源群组的方法。它能较全面地概括出自动变速器可能产生的各类故障，为准确诊断自动变速器故障创造了有利条件。     

中国和美国汽车保险比较——谈投保人对保险费率的影响

汽车保险是我国财产保险中份额最重的一项，随着中国汽车工业的迅猛发展，我国的汽车保险业也将迎来一个黄金期。但是与汽车王国美国相比较，我国汽车保险费率的厘定，更多地关注汽车本身，而忽略投保人这一主体因素，更多地关注人的因素，是加入WTO后的我国汽车保险人值得重视的一个话题。     

现代轿车自动变速器技术分析

自动变速器作为现代汽车传动系统中一个十分重要的总成，对车辆诸多性能的提高起着重要的作用。世界轿车自动变速器技术的发展无疑反映了当今该项技术的潮流，自动变速器技术正朝着结构多挡化、性能高效化、换挡智能化和舒适化等方向发展。     

上海市公交柴油车碳烟排放的评估与分析

介绍了上海市道路交通以及公交汽车拥有量的发展；按照发动机购置年份、机型以及车队等统计上海市公交柴油车碳烟排放状况；追踪某一车队同一机型连续几年来的百公里油耗以及碳烟排放水平，分析了影响公交柴油车碳烟排放的各种因素；最后从管理方面提出加强I／M制度以降低公交柴油车碳烟排放。     

Train scheduling simulation that minimises operational conflicts due to service constraints

This paper presents an attempt made to facilitate re‐scheduling of trains to minimize operational delays and accommodate uniform headways for off peak sub urban services subject to resource constraints such as locomotive availability, poor track conditions and stations without siding facilities. The paper describes the computer simulation model designed to optimize train schedules on single‐track rail lines. Using this simulation program it is possible to plan and optimize timetables for railway networks with train runs within short time periods for both single track and double track conditions. The paper describes the capabilities of presenting the results of the simulation runs. These include the time‐distance graph, the network with train movements, dialog boxes with information about selected trains. The programme is capable of changing the starting point, departure time, train destinations and adding or deleting a stop etc. from the user interface. Four objects of array variables are used in the simulation process to keep train and station data. Two object arrays are used for the train movements in up and down directions. The stations' data are stored in the other two object arrays. One of these arrays of stations contains all the stations of the line while the other one contains only the stations with siding facilities. A case study that covers a 61 km long single‐track line with 14 stations is presented to highlight the model capabilities.     

轿车覆盖件成型过程动态仿真有限元建模技术研究

研究了轿车覆盖件冲压成型过程动态仿真中的有限元建模问题，比较了可用于覆盖件成型分析的几类单元；讨论了单元的选取和单元划分的若干原则。并结合Santana2000型轿车侧框和NUMISHEET’96的S－Rail标准考题，说明了有限元仿真模型对成型仿真结果的影响。     

设计-施工总承包在武汉阳逻长江大桥南锚碇工程中的应用

介绍武汉阳逻长江公路大桥南锚碇工程采用设计-施工总承包模式的经验,对相关的招标和项目管理工作进行总结.针对我国的实际情况,分析该模式在工程建设中的适用范围.     

水泥、乳化沥青及其用量对水泥-乳化沥青混合料性能的影响

通过对结合料为乳化沥青、水泥乳化沥青以及水泥的混合料进行马歇尔稳定度试验、劈裂强度试验以及抗压强度试验,分析了混合料为这3种结合料的情况下各自的强度增长规律和力学特性,得出了水泥乳化沥青复合结合料具有很强的优越性.     

RC连续弯箱梁桥温度荷载下的位移计算及预防措施

以320国道某实际工程为背景，利用空间有限元软件ANSYS计算由温度变化引起的钢筋混凝土连续弯箱梁桥的不利变形，从设计和构造两方面提出预防温度变化引起的钢筋混凝土连续弯箱梁桥梁体外移的措施。     

Time Gap Modeling under Mixed Traffic Condition: A Statistical Analysis

This paper attempts to model vehicular time gap, which is defined as the time interval between any two successive arrivals of vehicles at a reference point of measurement on a road segment. Such an approach is justified under the non-lane-based heterogeneous traffic conditions prevailing in developing countries such as India, characterized by many “zero” time gaps due to simultaneous arrivals within a given road width. In addition, time gap data are characterized by a significant amount of data in the tail region due to long headways. Nevertheless, many researchers of time gap modeling have used light-tailed distributions that modeled time gaps satisfactorily due to two reasons: (a) The tail data was merged into a single bin; and (b) goodness-of-fit tests such as the Chi-square test, which has many limitations, were used. Further, some researchers have suggested different distributions for the same range of traffic flows, leading to ambiguity in distribution selection. In addition, bin size, which dictates the degree of fit of any distribution, has been ascribed very less importance in time gap modeling. Hence, this paper tries to consolidate and standardize the existing research in time gap modeling research by addressing all these issues. Two new distributions, namely Generalized Pareto (GP) and Generalized Extreme Value (GEV) with better tail modeling properties, have been proposed along with other conventional distribution to model vehicular time gaps over a wide range of flow from 550 vph to 4,100 vph. Two types of goodness-of-fit tests, namely Area-based and Distance-based tests, have been used. It has been found from the study that GP distribution fits the time gap data well (overall and tails) up to a flow range of 1,500 vph based on both kinds of tests, and GEV fits the data well for the flow levels above 1,500 vph based on the area test only.