Active Roll Control of Single Unit Heavy Road Vehicles

Summary Strategies are investigated for controlling active anti-roll systems in single unit heavy road vehicles, so as to maximise roll stability. The achievable roll stability improvements that can be obtained by applying active anti-roll torques to truck suspensions are discussed. Active roll control strategies are developed, based on linear quadratic controllers. It is shown that an effective controller can be designed using the LQG approach, combined with the loop transfer recovery method to ensure adequate stability margins. A roll controller is designed for a torsionally flexible single unit vehicle, and the vehicle response to steady-state and transient cornering manoeuvres is simulated. It is concluded that roll stability can be improved by between 26% and 46% depending on the manoeuvre. Handling stability is also improved significantly.     

Train scheduling simulation that minimises operational conflicts due to service constraints

This paper presents an attempt made to facilitate re‐scheduling of trains to minimize operational delays and accommodate uniform headways for off peak sub urban services subject to resource constraints such as locomotive availability, poor track conditions and stations without siding facilities. The paper describes the computer simulation model designed to optimize train schedules on single‐track rail lines. Using this simulation program it is possible to plan and optimize timetables for railway networks with train runs within short time periods for both single track and double track conditions. The paper describes the capabilities of presenting the results of the simulation runs. These include the time‐distance graph, the network with train movements, dialog boxes with information about selected trains. The programme is capable of changing the starting point, departure time, train destinations and adding or deleting a stop etc. from the user interface. Four objects of array variables are used in the simulation process to keep train and station data. Two object arrays are used for the train movements in up and down directions. The stations' data are stored in the other two object arrays. One of these arrays of stations contains all the stations of the line while the other one contains only the stations with siding facilities. A case study that covers a 61 km long single‐track line with 14 stations is presented to highlight the model capabilities.     

Process Save Reduction by Macro Joint Approach: The Key to Real Time and Efficient Vehicle Simulation

Applying a non-linear model reduction method to the tire suspension system of road vehicles enables an automatic transfer of complex offline simulation vehicle models to a mathematical model, which fits the real time simulation requirements. The basic assumption, that high frequent inner suspension dynamics are not relevant to handling manoeuvres, converts the differential algebraic equation system (DAE) of suspensions with kinematical closed loops into pure elasto-kinematical linkage equations. The equations of motions can be represented as an ordinary differential equation system (ODE) and considerable simulation time reductions are obtained for the off-line simulation and real time simulation is enabled. This so-called macro joint approach is an alternative modelling method to the well-known look-up table representation of suspension kinematics but it keeps the parameterisation of the original suspension model and is suitable to parameterised real time MBS models. With a second step the dynamics, caused by compliance in the suspension bushings, are reduced to their quasi-static behaviour. The consideration of these quasi-elasticity has nearly no influence on the necessary simulation time. This contribution shows the theoretical background and demonstrates the advantage of the macro joint model reduction approach on a typical vehicle example.     

Performance Benefits in Passive Vehicle Suspensions Employing Inerters

A new ideal mechanical one-port network element named the inerter was recently introduced, and shown to be realisable, with the property that the applied force is proportional to the relative acceleration across the element. This paper makes a comparative study of several simple passive suspension struts, each containing at most one damper and inerter as a preliminary investigation into the potential performance advantages of the element. Improved performance for several different measures in a quarter-car model is demonstrated here in comparison with a conventional passive suspension strut. A study of a full-car model is also undertaken where performance improvements are also shown in comparison to conventional passive suspension struts. A prototype inerter has been built and tested. Experimental results are presented which demonstrate a characteristic phase advance property which cannot be achieved with conventional passive struts consisting of springs and dampers only.     

徐宿高速公路碎石桩处理试验研究

主要结合睢宁三合同段中的碎石桩试验段研究碎石桩施工方案的可行性和处理的实际效果,完善碎石桩的施工工艺。通过室内土工试验、静力触探试验、标准贯入试验、动力触探试验、瞬态瑞利波试验等检测手段的对比研究,探讨碎石桩的检测方法和碎石桩加固效果检测的最佳检测时间。     

公路路面施工沥青拌和站建设方案探讨

通过对公路沥青拌和站的选型、选址、节能、加热方式等一系列问题进行探讨,研究如何在建设合理、高效、一流的拌和站的同时,怎样提高拌和质量,减少能源消耗,降低生产成本,以达到技术先进,经济效益和社会效益最佳配置的理想目标。     

筑路设备维修的经济分析

利用经济学基本原理,阐述如何对设备的维修工作进行效益分析,对提高施工企业的设备维修管理水平具有一定的借鉴作用.     

露石水泥混凝土路面关键技术研究

研究了露石水泥混凝土路面铺筑过程中必然要遇到的材料选择、冲洗时间、成熟度、双层铺筑混凝土强度等关键技术问题,分析了冲洗时间、成熟度的主要影响因素,发现温度越高,冲洗时间越早,最早冲洗时间与最迟冲洗时间有较大的间隔,常温下可达十多个小时,温度升高,间隔减小,成熟度随温度的升高而增大,相隔一定时间分两层振捣的水泥混凝土试件强度与一次振捣的水泥混凝土试件强度基本相同。结果表明:成熟度指标、试验法是评价、检测露石工艺性质的有效手段,两层铺筑方法是降低此种路面成本的有效途径。     

双离合器式自动变速器换挡特性研究

介绍了双离合式自动变速器工作原理，建立了换挡过程的数学模型，并对升、降挡的换挡特性进行了仿真与试验分析，为DCT的开发设计提供了参考依据。