Dolphin Liberation in Korea: Is it Beneficial for Conservation?

The release of captive dolphins (Tursiops aduncus) from South Korean marine parks, which occurred in 2013, 2015, and 2017, is described and evaluated for its usefulness for conservation of coastal ecosystems. The campaign to free the dolphins created a flagship species, uniting the efforts of national government agencies, local government, and NGOs. However, the Korean management agencies framed the release as a species-specific conservation intervention, while the NGOs brought forward welfare-based demands for the curtailment of cetacean captivity. We argue that the release of the Korean dolphins changed the policy climate, to facilitate two major policy changes: revision of anti-whaling regulations to prohibit capture of cetaceans for exhibit, and improvement of regulations for rescue, rehabilitation, and release of stranded marine animals. Tradeoffs between welfare and conservation concerns are described in terms of risk for the management agency, welfare for the animals, and feasibility of a continued commitment to maintain the viability of the dolphin stock in the wild. The release of captive animals to their native range relies on a single-species conservation focus which poses little risk for management agencies but does not guarantee their continued commitment.     

Comparative analysis of traveler destination choice models by method of sampling alternatives

In a destination choice model, it is important to introduce alternatives that have been adequately aggregated into traffic analysis zone levels based on spatial similarities and feasibility of analysis, because considering every spatial location possible for the traveler as an elemental alternative is intractable in terms of data management and analysis. In this study, we derive strata for alternative sets through simple random sampling and stratified importance sampling based on the concept of Moran’s I. As a result of comparative analysis, we are able to reduce errors by drawing an adequate number of samples for the destination choice model’s choice alternative sets based on measures of spatial similarity.     

Precise estimation of connections of metro passengers from Smart Card data

The aim of this study is to estimate both the physical and schedule-based connections of metro passengers from their entry and exit times at the gates and the stations, a data set available from Smart Card transactions in a majority of train networks. By examining the Smart Card data, we will observe a set of transit behaviors of metro passengers, which is manifested by the time intervals that identifies the boarding, transferring, or alighting train at a station. The authenticity of the time intervals is ensured by separating a set of passengers whose trip has a unique connection that is predominantly better by all respects than any alternative connection. Since the connections of such passengers, known as reference passengers, can be readily determined and hence their gate times and stations can be used to derive reliable time intervals. To detect an unknown path of a passenger, the proposed method checks, for each alternative connection, if it admits a sequence of boarding, middle train(s), and alighting trains, whose time intervals are all consistent with the gate times and stations of the passenger, a necessary condition of a true connection. Tested on weekly 32 million trips, the proposed method detected unique connections satisfying the necessary condition, which are, therefore, most likely true physical and schedule-based connections in 92.6 and 83.4 %, respectively, of the cases.     

海平面升高和离岸波高改变对近岸波浪和海岸结构的影响（英文）

In 1994, Townend proposed a method to calculate the relative changes in various wave characteristics and structure-related parameters due to sea level rise for regular waves. The method was extended to irregular waves by Cheon and Suh in 2016. In this study, this method is further extended to include the effect of future change in offshore wave height and the sea level rise. The relative changes in wavelength, refraction coefficient, shoaling coefficient, and wave height in nearshore area are presented as functions of the relative changes in water depth and offshore wave height. The calculated relative changes in wave characteristics are then used to estimate the effect of sea level rise and offshore wave height change on coastal structures by calculating the relative changes in wave run-up height, overtopping discharge, crest freeboard, and armor weight of the structures. The relative changes in wave characteristics and structure-related parameters are all expressed as a function of the relative water depth for various combinations of the relative changes in water depth and offshore wave height.     

Effect of vehicle model on the estimation of lateral vehicle dynamics

A methodology is presented for estimating vehicle handling dynamics, which are important to control system design and safety measures. The methodology, which is based on an extended Kalman filter (EKF), makes it possible to estimate lateral vehicle states and tire forces on the basis of the results obtained from sinusoidal steering stroke tests that are widely used in the evaluation of vehicle and tire handling performances. This paper investigates the effect of vehicle-road system models on the estimation of lateral vehicle dynamics in the EKF. Various vehicle-road system models are considered in this study: vehicle models (2-DOF, 3-DOF, 4-DOF), tire models (linear, non-linear) and relaxation lengths. Handling tests are performed with a vehicle equipped with sensors that are widely used by vehicle and tire manufacturers for handling maneuvers. The test data are then used in the estimation of the EKF and identification of lateral tire model coefficients. The accuracy of the identified values is validated by comparing the RMS error between experimentally measured states and regenerated states simulated using the identified coefficients. The results show that the relaxation length of the tire model has a notable impact on the estimation of lateral vehicle dynamics.     

Investigation of turbulent flows in a waterjet intake duct using stereoscopic PIV measurements

Stereoscopic particle image velocimetry measurements were made in a wind tunnel using a prototype waterjet model. The main wind tunnel provided the vehicle velocity and a secondary wind tunnel was set up as the waterjet propulsion model. Pressure distributions along the ramp and lip sides inside the duct were measured for three jet velocity to vehicle velocity ratios. Three-dimensional velocity fields were obtained at the intake entrance and the nozzle exit of the waterjet system. The flow into the duct was faster in the lip region than on the ramp side. Because of the variation in intake geometry from a rectangular to a circular section and because of the sudden curvature change on the lip side, a pair of counter-rotating vortices was observed in the mean velocity field at the nozzle exit. In addition, the turbulent kinetic energy correlated with the vortex pair was stronger on the lip side than in other areas. Dominant large-scale structures were extracted by using a snapshot proper orthogonal decomposition analysis. It was found that most of the turbulent kinetic energy was attributed to at least three vortices near the nozzle exit. This detailed three-dimensional velocity field will be useful for the verification of CFD simulations applied to the waterjet system.     

Characterization of driving patterns and development of a driving cycle in a military area

This study develops a gradient-sensitive driving cycle for vehicles in military areas with paved and unpaved roads over steep and undulating terrain. The methodology develops the driving cycle using micro-trips extracted from real-world data taking into account factors that affect fuel consumption. The accuracy of cycle depended on the root mean square error and information value.     

A GIS‐based traffic analysis zone design: technique

The main purpose of this paper is to develop an efficient method to design traffic analysis zones (TAZs), which is necessary for implementing a planning process with Geographic Information System (GIS) for Transportation (GIS‐T), using statistical spatial data analyses and GIS technology. The major roles of GIS in this method are: (1) to produce basic spatial units (BSUs) with topological data structure; (2) to integrate various procedures during the TAZ generation including computer program routines; and (3) to visualize the output of each TAZ generation. One of the most significant reasons for obtaining well‐defined TAZs is the fact that they are defined at the outset of transportation demand modeling, used from trip generation to trip assignment, and will ultimately affect transportation policy decisions.

Toward obtaining well‐defined TAZs, this paper concentrates on two important constraints: homogeneity and contiguity. Iterative partitioning technique is adopted to promote the optimum homogeneity of generated TAZs, while a contiguity checking algorithm is developed to ensure contiguous TAZs are generated by the iterative partitioning technique.     

Optimal power distribution of front and rear motors for minimizing energy consumption of 4-wheel-drive electric vehicles

In this paper, the optimal power distribution of the front and rear motors for minimizing energy consumption of a 4WD EV is investigated. An optimal power distribution control is developed based on the mathematical energy consumption model of an EV. The objective function is defined while ignoring time. And, the time effect is applied by considering the objective function for every single driving point which consists of the vehicle driving force and velocity. From the optimization problem, the optimal torque distribution maps of the front and rear motors can be obtained for all vehicle driving force and velocity ranges. These maps can be expressed using a 3-dimensional map. If the vehicle driving force and velocity are determined, the optimal front and rear motor torques can be determined using these maps. These maps can distribute the front and rear motor torques for the entire velocity range. Thus, these maps can perform the optimal power (torque times speed) distribution of the front and rear motors for minimizing the energy consumption of the 4WD EV. The performance of the optimal power distribution is evaluated by comparing the energy consumption to that of simple power distribution control. For obtaining the energy consumption, a vehicle driving simulation is performed. For the simulation, the driving cycle is required, and the NEDC (New European Driving Cycle) is used. From the simulation results, it is found that the energy consumption of simple power distribution is 4.8 % larger than the optimal one. Thus, the optimal power distribution can minimize the 4WD EV energy consumption as the optimization objective function.     

Design of a compact 18-speed epicyclic transmission for a personal mobility vehicle

This paper describes the design and shifting dynamics of a novel and small-sized transmission which composed of three epicyclic gear modules and a hub shaft in conjunction with several clutches. The proposed epicyclic gear train can be used in a personal mobility vehicle such as an electric utility vehicle and small car, etc. And it is distinguished from others for its small size, light weight, high efficiency, and wide speed range up to 18 gear steps. In this paper, its dynamic behavior is dealt with in order to ensure the automatic and robust shifts according to the shift commands, focused on the shift mechanism design. First the overall structure and operating principles of the transmission are described in detail. Based on the CAD data of whole components, a detailed multibody dynamic model is built using ADAMS software which can analyze the dynamic behavior of a mechanical system. Then numerical simulations are performed during the shift and whole operating period. From the simulation and experiment results, the overall performance and operating principles of the 18 speed epicyclic transmission are discussed and the design of shift device is optimized to ensure the robust shift finally.