Investigation on the vortex structure of propeller wake influenced by loading on the blade

The vortex structure of the wake behind a marine propeller was investigated in terms of loading variation by using particle image velocimetry. One hundred and fifty instantaneous velocity fields were ensemble averaged to study the spatial evolution of the wake and the behavior of the tip vortices in the region ranging from the trailing edge to one propeller diameter downstream. The trailing vorticity was found to be related to the radial velocity jump, and the viscous wake was affected by the boundary layers developed on the blade surfaces. A vortex identification method using the swirling strength was employed to extract the location of the tip vortex. The loading on the blade made a clear difference to the contraction angles. Slipstream contraction occurred in the very near wake region, and unstable oscillation occurred because of reduced interaction between the tip vortex and the wake sheet behind the maximum contraction point for each loading condition. The maximum tangential velocity around the tip vortex center revealed the average radius of its core, which was used for calculating the vortex strength. Additionally, variation of the average radius of tip vortices with the change of blade loading was related to vortex tube stretching in the wake region. The nearly constant vortex strength continued up to one diameter downstream for light loading and design loading conditions.     

Validation of the 3D biogeochemical model MIRO&CO with field nutrient and phytoplankton data and MERIS-derived surface chlorophyll a images

This paper presents results obtained with MIRO&CO-3D, a biogeochemical model dedicated to the study of eutrophication and applied to the Channel and Southern Bight of the North Sea (48.5°N–52.5°N). The model results from coupling of the COHERENS-3D hydrodynamic model and the biogeochemical model MIRO, which was previously calibrated in a multi-box implementation. MIRO&CO-3D is run to simulate the annual cycle of inorganic and organic carbon and nutrients (nitrogen, phosphorus and silica), phytoplankton (diatoms, nanoflagellates and Phaeocystis), bacteria and zooplankton (microzooplankton and copepods) with realistic forcing (meteorological conditions and river loads) for the period 1991–2003. Model validation is first shown by comparing time series of model concentrations of nutrients, chlorophyll a, diatom and Phaeocystis with in situ data from station 330 (51°26.00′N, 2°48.50′E) located in the centre of the Belgian coastal zone. This comparison shows the model's ability to represent the seasonal dynamics of nutrients and phytoplankton in Belgian waters. However the model fails to simulate correctly the dissolved silica cycle, especially during the beginning of spring, due to the late onset (in the model) of the early spring diatom bloom. As a general trend the chlorophyll a spring maximum is underestimated in simulations. A comparison between the seasonal average of surface winter nutrients and spring chlorophyll a concentrations simulated with in situ data for different stations is used to assess the accuracy of the simulated spatial distribution. At a seasonal scale, the spatial distribution of surface winter nutrients is in general well reproduced by the model with nevertheless a small overestimation for a few stations close to the Rhine/Meuse mouth and a tendency to underestimation in the coastal zone from Belgium to France. PO₄ was simulated best; silica was simulated with less success. Spring chlorophyll a concentration is in general underestimated by the model. The accuracy of the simulated phytoplankton spatial distribution is further evaluated by comparing simulated surface chlorophyll a with that derived from the satellite sensor MERIS for the year 2003. Reasonable agreement is found between simulated and satellite-derived regions of high chlorophyll a with nevertheless discrepancies close to the boundaries.     

A simulation study for the logistics planning of a container terminal in view of SCM

This paper aims to apply a supply-chain modelling and its analysis framework to the supply chain in the port industry. The simulation approach serves two purposes: to model a supply-chain network in quantity approach and to evaluate its supply-chain performance based on proposed strategies. Through the modelling works to improve the performance, components of simulation model, such as input model, strategy model, operational policy model and performance model, in the port supply chain were identified. The effects of various strategies can guide the way to administrate the supply chain in the different objectives.     

Development of route information based driving control algorithm for a range-extended electric vehicle

A route information based driving control algorithm was developed for an RE-EV which consists of two motorgenerators, MG1 and MG2. A threshold power which controls the engine on/off to charge the battery was obtained by an optimization process using route information, such as the vehicle velocity and altitude. The threshold power allows the vehicle to travel to the final destination while making the final battery SOC close to SOC _low. Using the threshold power, route based control (RBC) was proposed by considering the driver’s characteristics and traffic conditions using the driving data base. In addition, a relationship between the threshold power and various initial battery SOC was obtained by off-line optimization. The performance of the RBC was evaluated by simulation and human-in-the-loop simulation (HILS) for city driving. It was found from the simulation and HILS results that the RBC achieved approximately 4 % to 12 % reduction in fuel consumption compared to the existing charge depleting/charge sustaining (CD/CS) driving control.     

Fatigue design approach for the spot-welded T-type member using a simulated single spot-welded joint

In order to develop a fatigue design method for actual railroad car and commercial vehicle body structures using the fatigue data of simulated single spot-welded lap joints, we first analyzed the stress distribution and evaluated fatigue strength of spot-welded T-type members that are the components of actual railroad car and commercial vehicle body structures. Next, fatigue design approach of these members using the fatigue data of single spot-welded lap joints was investigated. From our results, we found that, even though there was a quantitative difference of fatigue strength between the single spot-welded joint and the actual members over the same number of fatigue cycles, through the use of appropriate correction, the fatigue design criterion of actual spot-welded members, such as those used in railroad car and commercial vehicle body, can be predicted using the fatigue strength of single spot-welded joint.     

Transient modeling and validation of lithium ion battery pack with air cooled thermal management system for electric vehicles

A transient numerical model of a lithium ion battery (LiB) pack with air cooled thermal management system is developed and validated for electric vehicle applications. In the battery model, the open circuit voltage and the internal resistance map based on experiments are used. The Butler-Volmer equation is directly considered for activation voltage loss estimation. The heat generation of cells and the heat transfer from cells are also calculated to estimate temperature distribution. Validations are conducted by comparison between experimental results at the cell level and the pack level. After validations, the effects of module arrangement in a battery pack are studied with different ambient temperature conditions. The configuration that more LiB cells are placed near the air flow inlet is more effective to reduce the temperature deviation between modules.     

Robustness analysis of ESC ECU to characteristic variation of vehicle chassis components using HILS technique

The ESC system, since its introduction in the mid 90s, has greatly contributed to prevention of vehicle accidents with its capability of maintaining vehicle stability in severe driving conditions. Due to its significant advantages, many nations are now adopting regulations that mandate installation of the ESC system in all classes of passenger vehicles — from mini to luxury. Accordingly it became important to know whether an ESC ECU can yield good performance on a wide range of vehicle parameter changes. In this paper, robustness analysis was conducted to study how characteristic variation of the main chassis components affect the performance of the ESC ECU. This analysis was carried out using a HILS system built on an actual ESC ECU. The variation range of each chassis component was carefully selected considering the component’s design criteria adopted in automotive industries. Based upon the robustness analysis results, the allowable variation ranges of the chassis components for ensuring sound performance of an ESC ECU were proposed.     

Robust design optimization of frontal structures for minimizing injury risks of Flex Pedestrian Legform Impactor

The Flexible Pedestrian Legform Impactor (Flex-PLI) consisting of a flexible femur and tibia will be tested for pedestrian protection by Euro NCAP within the next couple of years as a potential replacement for the Transport Research Laboratory (TRL) legform impactor. The injury risks that are measured when using Flex-PLI are the elongation of the anterior/posterior cruciate ligament (A/PCL), elongation of the medial collateral ligament (MCL), and tibia bending moment (TBM). In this study, we used a correlated computer-aided engineering (CAE) model to conduct a contribution analysis of each injury with regard to the changes in the location of the frontal structures based on the results of a design of experiments (DOE) and analysis of variance (ANOVA). The frontal structures that were selected as control factors were the energy absorber (EA), lower bumper stiffener (LBS), and hood angle. A kriging interpolation model was developed using the DOE results, and its results were compared with those of the CAE model. Furthermore, for robust design optimization, the speed and height of Flex-PLI were used as the noise factors. Finally, a robust design optimization was carried out using the optimal combination of the discrete control factors for minimizing MCL elongation.     

Analysis of the effect of cold start on fuel economy of gasoline automatic transmission vehicle

FTP75 driving cycle is used in many countries for evaluation of vehicle fuel economy. FTP75 has 3 phases, where the Phase 1 and the Phase 3 have a same velocity profile, but the Phase1, which is known as cold start phase, shows lower fuel efficiency than the Phase 3. In order to analyze the difference of fuel economy between Phase 1 and Phase 3, vehicle tests are performed. The test results show that the differences of fuel economy is ranging from 3.9% to 18.5%. The factors of the difference of fuel economy for gasoline automatic transmission vehicles are analyzed in this research. The key factors affecting the difference of fuel economy are engine friction loss, torque converter loss and accessory loss. The quantitative analysis of these factors is performed.     

Vibration path analysis and optimal design of the suspension for brake judder reduction

Brake judder is abnormal vibration, which is mainly generated by uneven contact between the brake disc and pad. The abnormal vibration from BTV (Brake Torque Variation) is transferred to the suspension and the steering system during braking. In this paper, judder simulation is carried out using a multi-body dynamic analysis program to analyze the relationship between judder and the transfer mechanism, which consists of the suspension and the steering system. In order to verify the analytical model, test results are compared with the simulation results. A sensitivity analysis is also carried out. In addition, an optimization method is presented for judder reduction, using the design of experiments.