Simulations of roughness growth on rails - results from a 2D non-Hertzian, non-steady contact model

A new model for simulating rail roughness growth on tangent track is presented in this paper. The model consists of three relatively independent components: (1) a time-domain vehicle/track interaction model; (2) a 2D non-Hertzian and non-steady wheel/rail contact model; and (3) a wear model. Wheel/rail contact forces for a given initial roughness obtained from the vehicle/track interaction model are used by the contact model to calculate the contact patch size, normal pressure and tangential stresses with material removal assumed to be linearly proportional to the friction work in the contact patch. The roughness profile is updated and fed back into vehicle/track interaction model. The 2D contact model is initially compared with a 3D model for various wavelength of initial sinusoidal roughness. Long term roughness growth is then simulated with the 2D contact model. Simulation shows that all initial sinusoidal roughness of wavelengths between 20-100 mm are levelled out. The wavelength-fixing mechanism, that has previously been used to explain the cause of corrugation, is not found in the present investigations.     

耦合非线性三维海洋立管的边界控制(英文)

This paper presents a design of boundary controllers implemented at the top end for global stabilization of a marine riser in a three dimensional space under environmental loadings. Based on the energy approach, nonlinear partial differential equations of motion, including bending-bending and longitudinal-bending couplings for the risers are derived. The couplings cause mutual effects between the three independent directions in the riser’s motions, and make it difficult to minimize its vibrations. The Lyapunov direct method is employed to design the boundary controller. It is shown that the proposed boundary controllers can effectively reduce the riser’s vibration. Stability analysis of the closed-loop system is performed using the Lyapunov direct method. Numerical simulations illustrate the results.     

The Value of a Spillover Fishery for Spiny Lobsters Around a Marine Reserve in Northern New Zealand

The contribution that Leigh Marine Reserve in northern New Zealand makes to the local spiny lobster fishery was examined by comparing the catch characteristics of Jasus edwardsii around the reserve boundary with those from Coastal Leigh, 0.3-2 km from the reserve, and Little Barrier Island, 22-30 km from the reserve. Seasonal trends were apparent in the reserve catch characteristics, consistent with lobster movements into and out of offshore fishing areas adjacent to the boundary. No significant difference was detected in catch per unit effort (kg.trap haul -1 ) among locations. However, the catch around the marine reserve consisted of fewer but larger lobsters than at Little Barrier Island, while the size and number of lobsters caught per trap haul at Coastal Leigh was intermediate between the other two locations. Catch rates around the reserve were more variable than at the other sites, but on average, the amount of money made per trap haul was similar to Little Barrier Island and Coastal Leigh.     

Successful Transplantation of a Fragmenting Coral,Montipora digitata,for Reef Rehabilitation

The scleractinian coral Montipora digitata (Acroporidae) is a common reef flat species that thrives under high levels of light and water turbulence, and propagates successfully by natural fragmentation. It was used for transplantation experiments in an attempt to restore a degraded lagoon environment in the northwestern Philippines. Branches about 5 cm high from a natural population in the lagoon were transplanted to dead coral outcrops or knolls in two locations (Binlab and Malilnep-Ac) with different environmental characteristics. Growth and survival were significantly better at Malilnep Ac, which resembled the natural habitat of the species more closely. Environmental conditions at this site also favored the establishment of a greater diversity of species around the coral transplants. There was no difference in performance between transplants on vertical and horizontal surfaces, and the transplants showed limited differences due to density within the experimental range. Significant survival of detached, transplanted colonies or fragments thereof around the bases of the experimental bommies at the more successful site was an additional positive outcome. Water motion showed significant effects on survival and growth, possibly enhancing the suitability of the more successful site for transplantation. These results demonstrate the potential of coral transplantation to initiate the establishment of natural communities in degraded reef areas, a concern for coastal managers in developing countries.     

Wetlands protection: The regulatory role of the U.S. army corps of engineers

The U.S. Army Corps of Engineers administers the only nationwide regulatory program that controls development activities in U.S. waters and wetlands. This article examines the statutory authorities, jurisdictional limitations, and evolution of the current Corps regulations, which express a strong policy to protect wetlands, estuaries, and tidal waters from unnecessary dredging, filling, or other alteration. The article explains the organization and procedures of the U.S. Army Corps of Engineers and examines in detail several precedential permit cases which have developed and implemented the Corps “wetlands policy.”; The article also evaluates current and potential policies underlying the regulatory efforts of the Corps of Engineers.     

Scientists and Crew

This study reports on scientist/crew relations aboard research vessels at sea. It is a case study in a case study in a long-range project dealing with the relations of natural scientists in the U.S.A. to various segments of the lay population. An earlier paper dealt with the interaction of scientists and Government policy makers during the science-advisory process [1]. In that study we found that the frustration was reciprocal; scientists and policy makers were equally vocal on what was wrong with ‘ the other groups’. The present research, by comparison, focuses on scientists and members of ‘the working class’. Here we find the frustration rather one-sided, reflecting the differences in status and power of the two groups. On a research vessel, science and scientists control the lives and careers of the mariners. In the science-advising committee, members of both government and science meet as social equals.

In this paper elements of conflict between scientists and crew on a research vessel are described. It is suggested that conflict between these two groups is the inevitable result of extending the ‘intellectual’/‘worker’ class conflict of our society to a closed space at sea. The controlling mechanism of the conflict may be called ‘subcultural privacy’, a mechanism worked out by mariners to cope with the disrupting effects of a constant stream of strangers into their sea-going home. The mechanism takes the form of institutionalized ‘bitching’ and systematic physical separation of scientists and crew during critical periods of the day. It is suggested that attempts to create greater crew/scientist harmony by forcing by greater interaction (and thus a breakdown of subcultural privacy) will be counter productive.     

Analyzing the dispersion of cargo vapors around a ship’s superstructure by means of wind tunnel experiments

In a previous study, it was found that cargo tank operations like cleaning and venting, lead to higher cargo vapor concentrations around the ship’s superstructure. Can wind tunnel experiments confirm these findings? Is there an improvement when using higher outlets at high velocities compared to lower outlets with a low outlet velocity? Is there a relation between relative wind speed and measured concentration? These questions were investigated in the Peutz wind tunnel. By using a tracer gas for the wind tunnel experiments, concentration coefficients have been calculated for various settings. The study shows that using high-velocity outlets is an efficient way to keep concentrations as low as possible. The only exception is for relative wind directions from the bow. In this last case using a manhole as ventilation outlet leads to lower concentrations. With increasing wind speeds the building downwash effect resulted in higher concentration coefficients near the main deck. This study confirms our on-board measurements and suggests the lowering of the ventilation inlet of the accommodation, so that the high-velocity outlet can be used safely at all times.     

发展“绿色”汽车势在必行 但道路崎岖

在过去几年里,中国试图将新能源汽车开发领先于世界。但高成本、技术落后和低动力继续阻止了新能源汽车的量产。两年前,《纽约时报》曾刊登了一篇题为“中国力争成为世界电动汽车的领头羊”的文章,报道了中国汽车产业政策制订者将中国定位于“在未来三年内”成为全球领先的绿色能源汽车生产国之一。     

Method for analyzing epicyclic gearboxes

This paper presents a method for analyzing epicyclic gearboxes by evaluating the speeds, torques and power of the external elements in epicyclic gear mechanisms, as well as the total ratios of the gear box. The method is based on the equations that describe each epicyclic gear mechanism and rules that assign appropriate codes to the external elements. The method emphasizes how power flows are transmitted through the epicyclic gears, as well as power losses. Analysis of an epicyclic gear box is performed to illustrate the proposed method.     

Impact Analysis of the Reduction Effect for Reducing Joint Position of Stick-slip Fault TunnelEI北大核心

Research purposes: Based on an engineering of traffic tunnel, anti-breaking model experiment of large-scale 1 :30 is carried out under fault dislocation. Reduction effect of three working conditions(working condition A of no reducing joint, B of staggered setting of reducing joint and dislocation surface, C of reducing joint set at dislocation position) is comparatively analyzed by analysis of contact pressure, lining strain and lining stress. The optimal location of reduction joint is explored. Research conclusions:(1)The reduction effect of different position of reducing joint is different, such as A相似文献