Prediction of ship brittle fracture casualty rates by a probabilistic method

It has been proposed that grade A should be replaced with a tougher steel for ship construction. This recommendation is not supported by casualty statistics. Brittle fractures have decreased from once every 10 ship years at the time of the Liberty ships, to once every 100 ship years in the 1950s, and now stand at around once every 10,000 ship years. The authors have developed a probabilistic fracture mechanics approach indexed to the Charpy 27 Joule temperature, T_27J. This is used here to analyse the Liberty ship failures. Comparison with a databank of T_27J values for grade A steel spanning 1920 to 1995 suggests that the Liberty ship steel was unusually brittle. The probability analysis shows good agreement between predicted and observed fracture casualty rates for the Liberty ships and helps explain why brittle fractures are now uncommon in grade A steel ships.     

全阶状态观测器在传动控制系统中的速度辨识

比较了直接转矩控制中2种计算定子磁链的方法：全阶磁链观测器法和电压-转速模型法的异同。利用MATLAB对设计的一个闭环磁链观测器进行极点配置,在该观测器基础上采用自适应原理对电机转速进行辨识。     

Possible Improvements in Ride Comfort

The random vertical vibration of two linear models of a sprung mass with a passenger on seat is numerically solved. The input signal has a power spectrum of a real road. The acceleration of the passenger is frequency-weighted according to two various criteria. The gain in comfort obtained by lowering the natural frequency of the sprung mass is calculated along with the dynamic and static spring deflections. In addition, a solution of the vibration of the unsprung mass with evaluation of a possible improvement is presented.     

Analytical Tire Models for Dynamic Vehicle Simulation

Four basic tire models suitable for dynamic vehicle simulation are formulated. The models are compared through a six-degree-of-freedom nonlinear simulation of a cargo truck crossing rough ground. Guidelines are developed for the selection of an optimum tire model for a given dynamic vehicle simulation.     

On Control Laws for Vehicle Suspensions Accounting for Input Correlations

Input correlations involving time delays are common in active vehicle suspension system problems. One approach to control law derivation fur such systems is to restrict attention to slate feedback laws in the interests of practicality and it is then of interest to determine the law which is, in some sense, the best. Under assumptions which are common in this area. relating to input, system and cost Function forms, a new derivation of the expression for the cost, accounting for time delays, is given. The use of the expression in numerical procedures for determining effective control gains is discussed and an example for a half car planar vehicle model is described. By comparing results with existing ones which are truly optimal, an estimate is made of the loss of performance which results from the restriction of the control law form in this case. Some generalisation of the results is attempted and they are placed in a contemporary context at the conclusion.     

IEC列车通信网络

国际电工委员会（ＩＥＣ）和国际铁路联盟（ＵＩＣ）为铁路车辆之间和车辆内互相联接的可编程设备制定了一项标准——《列车通信网络》（ＴＣＮ），其目的是有利于铁路运用部门、装配厂和设备供应商实现世界范围的车辆间的相互操作和插入式设备的联接。文章介绍了ＴＣＮ的体系结构，包括绞线式列车总线（ＷＴＢ）和多功能车辆总线（ＭＶＢ）的功能、技术参数、公共协议及网络管理，并对ＴＣＮ原型的开发、试验验证情况和标准草案工作进程作了简要的说明。     

Thermal anaysis of an electric water pump for internal combustion engine vehicles

An electric water pump for engine cooling system has an advantage which particularly in the cold start, the use of the electric water pump saves fuel and leads to a corresponding reduction in emissions. However, the electric water pump for internal combustion engine generates much more heat loss than that for hybrid electric vehicle or electric vehicle since it is operated by electric power of high current and low voltage. In this study, the fluid flow and thermal characteristics of the canned type electric water pump with an inverter integrated has been investigated under the effects of heat generation. The analysis conditions such as outdoor air temperature of 125°C, water pump speed of 6000 rpm, coolant temperature of 106°C and coolant flow rate of 120 L/min were used as a standard condition. Therefore, the thermal performance of the canned type electric water pump’s motor and inverter was evaluated by comparison with that of mechanical seal type. In the motor, the temperature reduced by over 10°C, and in the inverter, the amount of temperature decrease equaled to the maximum temperature difference, about 18.7°C. Also, canned type electric water pumps of variable materials were compared for the evaluation of thermal transfer performance for variable thermal conductivity of a can. The motor and inverter were cooled lower to 42°C at motor and about 40°C at inverter for reasonable selection of can’s thermal conductivity.     

铁路货车防盗系统设计

针对铁路运输的货物在途中被盗现象，提出了货车、集装箱防盗系统的设计原理，给出了系统硬件结构示意图和软件设计框图并对其在 Ｔ Ｍ Ｉ Ｓ中的使用前景进行了展望。     

六边形钢丝网状加筋拉拔特性试验研究

以六边形钢丝网作为加筋材料,在室内模拟拉拔试验箱中进行了大型拉拔试验。得出了在不同的法向应力条件下六边形钢丝网的拉拔强度、破坏模式以及不同部位位移变化规律。