Dynamic modeling and active control of a strap-on launch vehicle

Dynamic modeling and active control of a strap-on launch vehicle are studied in this paper. In the dynamic modeling, the double-compatible free-interface modal synthesis method is used to establish dynamic model of the system, and its model precision is compared with those of finite element method(FEM), fixedinterface modal synthesis method and free-interface modal synthesis method. In the active control, the swing angle of rocket motor is used as design variable, and the control law design based on the model of mass center motion is adopted to validate the system. Simulation results indicate that the double-compatible model synthesis method can properly approximate the FEM which is used as the benchmark solution, and the model precision of the double-compatible modal synthesis method is obviously higher than those of the fixed-interface and freeinterface modal synthesis methods. Based on the control law design, the deflection of mass center of the launch vehicle is very small.     

Coupled heat and mass transfer analysis of NH<Subscript>3</Subscript>-H<Subscript>2</Subscript>O falling film absorption on inner tube surface with low solution flow rates

NH₃-H₂O falling film absorption usually takes place with low solution flow rate in real absorption refrigeration system. An experimental study of inner vertical absorption is carried out for the consideration of air-cooling absorber. Variable working conditions are tested to evaluate the heat and mass transfer performances.The traditional evaluation method based on log-mean-temperature（concentration） difference is criticized for its lack of theoretical basis while simultaneous heat and mass transfer process occurs. A new method proposed by Kim and Infante Ferreira is modified to evaluate the experimental results with reasonable assumptions. The method is based on the derivation of coupled heat and mass transfer differential equations of NH₃-H₂O absorption process.The analysis of the same experimental data shows that the new method realizes better consistency with smaller error, especially in heat transfer aspect. Heat and mass transfer performance is enhanced with the increase of solution Reynolds number. Sub-cooling of inlet weak solution also has positive influence on the absorption process,which should be evaluated by the new method correctly. Two correlations are developed to evaluate both Nusselt and Sherwood numbers for the design of air-cooling absorber.     

A bayesian based process monitoring and fixture fault diagnosis approach in the auto body assembly process

The auto body process monitoring and the root cause diagnosis based on data-driven approaches are vital ways to improve the dimension quality of sheet metal assemblies. However, during the launch time of the process mass production with an off-line measurement strategy, the traditional statistical methods are difficult to perform process control effectively. Based on the powerful abilities in information fusion, a systematic Bayesian based quality control approach is presented to solve the quality problems in condition of incomplete dataset. For the process monitoring, a Bayesian estimation method is used to give out-of-control signals in the process. With the abnormal evidence, the Bayesian network (BN) approach is employed to identify the fixture root causes. A novel BN structure and the conditional probability training methods based on process knowledge representation are proposed to obtain the diagnostic model. Furthermore, based on the diagnostic performance analysis, a case study is used to evaluate the effectiveness of the proposed approach. Results show that the Bayesian based method has a better diagnostic performance for multi-fault cases.     

Deliberative collision avoidance for unmanned surface vehicle based on the directional weight

The purpose of this study is to realize the intelligent deliberative obstacle avoidance for unmanned surface vehicle (USV), based on the International Regulations for Preventing Collisions at Sea called COLREGS. Firstly, a three-level system architecture is designed for the ship intelligent collision avoidance system. Secondly, an intelligent collision avoidance algorithm is presented based on the calculation of motion parameters and the rules of COLREGS. Thirdly, according to COLREGS, the marine environment is modeled from the electronic chart data and radar information, and a deliberative collision avoidance algorithm is written. Finally, the deliberative collision avoidance simulation is carried out for the USV. The feasibility and reliability of intelligent collision avoidance algorithm are verified by the vivid simulation results.     

A dynamic computable general equilibrium simulation of China’s innovation-based economy under the new normal

Researching China’s innovative economic and financial innovation issues under the background of the New Normal, we need to carefully analyze the internal structure and interaction of China’s macroeconomics. The computable general equilibrium (CGE) model has outstanding advantages on predicting the external shock influences on economic system, but previous studies on forecast for China’s future economy mostly considered a high growth rate which is hard to comply with the New Normal scene. By constructing China’s macroeconomic dynamic CGE (DCGE) model and anticipating the economic impact of the New Normal, this paper finds that the New Normal has a certain extent inhibition on China’s macro-economy and innovation. However, after adding the research and development (R&D) subsidy policy, the negative impacts of the New Normal on macro-economy can be eliminated to realize the optimization of economic structure. In addition, after combining the financial innovation promoting policy and the KeQiang index through the simulation of macro-economy, we find that the quality of economic growth is improved. Finally, we provide the policy recommendations for the realization of an innovative economy under China’s New Normal.     

Non-probabilistic reliability research on multi-variable hydraulic turbine blade model

Based on the interval mathematics and possibility theory, the variables existing in hydraulic turbine blade are described. Considering the multi-failure mode in turbine blade, multi-variable model is established to meet the actual situation. Thus, non-probabilistic reliability index is presented by comparing with the output range and the given range.     

Reliability analysis of multi-state repairable system with dynamic transition probabilities

Inadequate maintenance decisions lead to incremental overall costs. In order to minimize costs in maintenance of the multi-state repairable system, we model a preventive maintenance (PM) scheme of the multistate repairable system using non-Markov process. The periodically decreasing reliability model of the non-Markov dynamic system with dynamic transition probabilities is established to satisfy the probability change. The diesel engine system is taken as an example to illustrate the model. The reliability of the diesel engine is analyzed and its PM scheme is worked out. RENO software is used to simulate the diesel engine system. The maintenance cost of components and the optimal PM interval data of the system are obtained by using the minimal average cost as the objective function. The adaptability of PM is judged, and the optimal PM scheme is presented.     

Online fault diagnosis of modern process industry system based on color-spectrum

This paper proposes a new method to diagnose the system fault of the process industry based on the monitor data set of distributed control system (DCS). Firstly, it defines a homeomorphism product space named color phase space which is a Cartesian product of two-dimensional Euclidean space and three-dimensional color phase space. Secondly, it maps the DCS data to the color phase space in order to get a system color-spectrum which displays the inherent relationship of the whole system. Then, it diagnoses the system fault by observing the color change on the color-spectrum depending on the physiological characteristics that human’s eyes are more sensitive for the color change than data change.     

The ambivalence of ridesharing

Ridesharing is quite a popular topic of discussion among transport authority personnel. It is perceived to be a viable alternative to classical modes of transportation, and receives a great deal of political support from transport planners. However, not much objective information is available on ridesharing behaviors. We use travel survey data to study the evolution of the ridesharing market in an urban area. Our study is based on data from four large-scale OD surveys conducted in the Greater Montreal Area (1987, 1993, 1998 and 2003). In the latest survey conducted in Montreal, car passengers were asked to identify the driver who gave them the opportunity to travel in this way. Their answers were classified according to the type of driver; for instance, a member of their household, a neighbor or a co-worker. We use this information to calibrate a model matching car passengers and car drivers belonging to the same household. This will be referred to as IHHR (intra-household ridesharing). Preliminary results reveal that approximately 70% of all trips made by car passengers are the result of IHHR. Furthermore, around 15% of those trips are questionable, in that they were exclusively generated for another individual’s purposes, consequently generating an additional trip for the journey back home. Moreover, this percentage increased over time. Objective data regarding ridesharing and its evolution in an urban area will undoubtedly help decision makers gain a clearer profile of this means of travel and help to realign attitudes on the issue.

The role of paratransit: some reflections based on the experience of residents’ coach services in Hong Kong

Paratransit refers to urban transport services “somewhere between private passenger transport and conventional public transport in terms of cost and quality of service” [Rimmer (1980), Paratransit: A commentary. Environ. Plan. A 12, 937–944]. Since the 1980s, a new form of paratransit—residents’ coach, which provides exclusive transport services to residents living in private housing estates—has emerged in Hong Kong. What was the background underlying the emergence and subsequent growth of residents’ coach services? Also, what was the role of residents’ coach in the public transport system of Hong Kong? With the completion of more railway extensions, should residents’ coach services be replaced? If so, what are the potential impacts on people’s life? This paper addresses the above research questions through a large-scale questionnaire survey that examined not only people’s modal choice but also their residential choice, socio-economic background and attitudes. The findings suggest that transport policy makers should pay more attention to examine new forms of paratransit and the ways of integrating them into the overall public transport system, both spatially and temporally. It is only through the development of an efficient and multi-modal transport system can the maximum potential of paratransit in filling the transport gap between conventional mass transit and private cars be realized.