DC Motor Current Control Algorithm Using Proportional-Integral LQT with Disturbance Observer

This paper proposes a DC motor current control algorithm using a proportional-integral linear quadratic tracking (LQT) controller with a disturbance observer for the electronic stability control (ESC) brake system. Previously researched algorithms related to current control using disturbance rejection are robust control, adaptive control, LQT, or proportional-integral disturbance observer (PI-DOB); each of them has both advantages and disadvantages. The proposed algorithm uses a disturbance observer in order to improve disturbance rejection performance while avoiding the drawbacks of high gain property. Additionally, the proposed algorithm adds integral control in order to improve performance in the low frequency bands. In order to assess the performance of the proposed algorithm, simulations and experiments are performed in the time and frequency domains to compare the proposed algorithm with different algorithms which are actually implemented into the ESC. The proposed algorithm shows good characteristics near the cut-off frequency, which can be confirmed clearly by the time domain results.     

Electrically Assisted Internal Combustion Engines: A Comparative Analysis

An electrically assisted internal combustion engine is obtained by combining a conventional engine and one or more electrical motors of considerably smaller size. A key feature of such an innovative vehicle hybridization approach is that the torque generated by electric machines is not transmitted to the wheels. The electric motors are, in fact, intended only to assist the internal combustion engine in low efficiency, low performance, or high polluting working conditions. They however, draw extra power and energy from the battery. This paper presents a tool to evaluate different possible solutions in terms of energy balance, efficiency, battery stress and battery ageing. The method, which is based on suitable mathematical models and specific analysis criteria is also exploited to compare eight different configurations of a C-segment vehicle, pointing out limits and capabilities of traditional 12?14 V systems.     

Trends in vehicle motion control for automated driving on public roads

ABSTRACT

In this paper, we describe how vehicle systems and the vehicle motion control are affected by automated driving on public roads. We describe the redundancy needed for a road vehicle to meet certain safety goals. The concept of system safety as well as system solutions to fault tolerant actuation of steering and braking and the associated fault tolerant power supply is described. Notably restriction of the operational domain in case of reduced capability of the driving automation system is discussed. Further we consider path tracking, state estimation of vehicle motion control required for automated driving as well as an example of a minimum risk manoeuver and redundant steering by means of differential braking. The steering by differential braking could offer heterogeneous or dissimilar redundancy that complements the redundancy of described fault tolerant steering systems for driving automation equipped vehicles. Finally, the important topic of verification of driving automation systems is addressed.     

Development of hydrogen-compressed natural gas blend engine for heavy duty vehicles

Natural gas fuel, as an alternative energy source of transportation, has been used widely since it has an advantage of low emission levels. However, new technologies are required in order to meet the reinforced emission regulations. For this purpose, research into the development of hydrogen-compressed natural gas (HCNG) blend engine was carried out to evaluate its feasibility and emission characteristics. The Engine Research Department at the Korea Institute of Machinery and Materials carried out a large number of tests based on various parameter changes that could affect the performance and emission of HCNG engine in different operating conditions. An earlier stage of the research project focused on the lean combustion of a HCNG engine for heavy duty vehicles to meet the EURO-VI standards. An 11-L/6-cylinder CNG engine was used for the test. The effects of the excess air ratio change were assessed based on various content ratios of hydrogen in the natural gas fuel. In the later part of the HCNG research, a stoichiometric mixture operation was suggested to meet reinforced emission regulation without requiring a De-NOx system. Additionally, an exhaust gas recirculation (EGR) system was introduced for the purpose of improving thermal efficiency and durability. The optimal operating conditions were selected to achieve the best thermal efficiency to meet the required emission levels. In this paper, we demonstrate that a HCNG engine can achieve a significant decrease in NOx emissions, as compared to that of a CNG engine, while meeting the requirements of the EURO-VI standards during a transient mode cycle test. EGR can suppress the weakness of stoichiometric mixture combustion strategy, such as the deterioration of the durability and thermal efficiency, while the emission level can be lowered with the use of a three-way catalyst. The possibility of further reduction of emissions and CO2 with EGR was evaluated to access practical application of a HCNG engine in the field. From that evaluation, the HCNG engine with stoichiometric mixture operation for heavy duty vehicles was developed. The emission levels of HCNG engine were 50 % lower when compared to the EURO-VI standards with a greater than 10 % decrease in CO₂ compared to that of a natural gas engine.     

Grid convergence study in the resistance calculation of a trimaran

As a new type of hull form, trimaran has remarkable excellent performances and has drawn more and more attention. When the viscous CFD technology now available is applied to the research of resistance performance of trimaran, the spatial discretization would usually result in the grid error and uncertainty, and thus the considerable discrepancy between the numerical results and the experimental data. In order to ascertain how much the grid would affect the calculation, the grid convergence should be studied. A mathematical trimaran was chosen as an example, with the commercial code CFX for the simulation, VOF for surface treatment, and the grid study was carried out based on two different turbulence models. It was concluded that carrying out grid study is helpful in estimating the grid error and uncertainty, and indicating the direction of improving the credibility of the numerical calculation, and, in addition to grid errors and uncertainties, the turbulence modeling errors and uncertainties contribute to the simulation errors.     

船体表面矩形块优化敷设设计(英文)

Rectangular tiles can be laid on a ship’s hull for protection, but the sides of the tiles must be adjusted so adjacent tiles will conform to the curvature of the hull. A method for laying tiles along a reference line was proposed, and an allowable range of displacement for the four vertices of the tile was determined. Deformations of each tile on a specific reference line were then obtained. It was found that the least deformation was required when the tiles were laid parallel to a line with the least curvature. After calculating the mean curvature on the surface, the surface was divided into three layout areas. A set of discrete points following the least deformation of the principal curvatures was obtained. A NURBS interpolation curve was then plotted as the reference line for laying tiles. The optimum size of the tiles was obtained, given the allowable maximum deformation condition. This minimized the number of bolts and the amount of stuffing. A typical aft hull section was selected and divided into three layout areas based on the distribution of curvature. The optimum sizes of rectangular tiles were obtained for every layout area and they were then laid on the surface. In this way the layout of the rectangular tiles could be plotted.     

Getting by with a little help from my friends…and family: immigrants and carpooling

While much of the scholarly literature on immigrants’ travel focuses on transit use, the newest arrivals to the United States make over twelve times as many trips by carpool as by transit. Using the 2001 National Household Travel Survey and multinomial logit mode choice models, we examine the determinants of carpooling. In particular, we focus on the likelihood of carpooling among immigrants—carpooling both within and across households. After controlling for relevant determinants of carpooling, we find that immigrants are far more likely to form household carpools than native-born adults and also are more likely than the native-born to form external carpools (outside the household). Moreover, when faced with the options of carpooling and public transit, immigrants—even recent arrivals—appear to prefer carpools over transit more strongly than the native born.     

A numerical approach to trajectory planning for yoyo movement

Based on nonlinear trajectory generation (NTG) software package, a general approach (i.e. numerical solution) to trajectory planning for yoyo motion is presented. For the real-time control of such periodical dynamic system, a critical problem is how to implement fast solving the optimal trajectory, so as to meet the real-time demand. However, traditional numerical solution methods are very time-consuming. In this paper, the optimization problem is solved by mapping the problem to a lower-dimension space. And combined with multithread programming technology, the computation time for solving the optimal trajectory is greatly reduced. Simulation results show that the numerical solution is identical to the analytic one, which demonstrates the correctness of the proposed method. The computation time of one cycle of yoyo simulation is about 10 ms, which shows that the proposed numerical method can be applied to the real-time control of yoyo playing.     

Single-assignment hub location problems with multiple capacity levels

In this paper, an extension of the classical capacitated single-allocation hub location problem is studied in which the size of the hubs is part of the decision making process. For each potential hub a set of capacities is assumed to be available among which one can be chosen. Several formulations are proposed for the problem, which are compared in terms of the bound provided by the linear programming relaxation. Different sets of inequalities are proposed to enhance the models. Several preprocessing tests are also presented with the goal of reducing the size of the models for each particular instance. The results of the computational experiments performed using the proposed models are reported.     

A low-cost testbed of underwater mobile sensing network

Comprised by a swarm of acoustically linked and cooperative autonomous underwater vehicles (AUVs) with onboard sensors, an underwater mobile sensing network (UMSN) will be a complementary means to fixed observatory networks, e.g. seafloor observatory networks and moored buoy arrays. It has obvious advantages over a single large AUV in higher efficiency due to parallel observation, stronger robustness to vehicle failures and lower cost. Although an UMSN can be viewed as a counterpart of wireless mobile sensing networks for air and terrestrial applications, it is much more challenging due to poor performance of underwater acoustic communication, poor performance of underwater positioning and high degree of uncertainty in vehicle dynamics and underwater environment. In order to verify key technologies involved in an UMSN, e.g. cooperation of multi-AUVs based on acoustic communication, a low cost testbed has been developed for experimental study. The design of both hardware and software is introduced. Also the results of a functional test for verification of the effectiveness of the testbed are presented.