喷撒颗粒的增粘机理研究

本文建立了向轮轨接触间喷撒颗粒时的摩擦模型，并将此摩擦模型应用于修正的轮轨粘着理论中，对喷撒颗粒的增粘机理进行了理论研究。从理论计算结果可以看出，向轮轨接触间喷撒颗粒的增粘效果是非常明显的，且增粘效果和轮轨的表面状态、颗粒的质量和进入轮轨接触面间的颗粒数量有关。     

汽车车身柔性装焊生产线探讨

阐述了建立汽车车身柔性生产线的必要性，指出了车身装焊生产线是汽车车身柔性生产的关键，从工艺设备、工装夹具、机械化输送及自动控制几个方面控制实现柔性汽车装焊生产线的措施。分析了柔性装焊生产线－车身生产发展的趋势，论证了计算机是实现柔性自动控制的核心。     

导管螺旋桨软件设计方法

本文简要分析了导管螺旋桨的优缺点是一般设计方法,结合所开发的通用导管桨设计软件,阐述了导管桨的设计方法,最后给出了一个基于该软件的设计实例     

供应链战略合作伙伴的选择

在现代物流科学理念的引导下,为进一步提升企业的核心竞争力、降低资源配置成本和更好地满足客户柔性化需要,人们开始将管理目光从企业内部的生产或服务过程转向产品和服务的全生命周期中的整个供应链系统,即从内部整合走向外部整合,从“大而全”的纵向一体化走向优势互补的横向联营化。这里就提出了一个供应链战略合作伙伴的选择问题。     

地铁电动车组的VVVF逆变器控制系统

本文简述了交流传动系统应用于城市地铁交通的优越性，分析了主电路及控制电路的原理，并对其具体实现办法进行了初步探讨。     

柔性下水技术走进1999

从1999年6月1日起,一项新标准--CB/T3837-1998<船舶用气囊上排下水工艺要求>将开始实施.这项我国独创的新工艺标准由济南昌林气囊容器厂与中船总公司综合技术经济研究院共同提出、起草,1998年10月在全国海洋船舶标准化技术委员会修船分技委召开的标准审查会上审定通过.新标准总结了多年的实践经验,它的实施将进一步规范船舶用气囊上排、下水的工艺操作规程,使船舶用气囊上下水更加安全可靠.     

Tool sequence optimization based on three logical modes of robot control via CPLEX optimization

Cluster tools have advantages of shorter cycle times, faster process development, and better yield for less contamination. The sequence of dual-arm cluster tools is a complex logistics process during the semiconductor production. Efficient use of cluster tools is naturally very significant to competitive fab operations. Generating an optimized sequence in a computationally efficient manner and assessing the quality of the requirements to improve the fab production are the key factors for semiconductor manufacturing productivity. The Petri net modeling is introduced to minimize the makespan of the process for the three different logical modes and select a better mode after comparing the makespan among the three logical modes. The tool sequence optimization problem is formulated as optimization firing transition sequences based on the Petri net and then the formulation is converted to be linearly solved by the branch-and-cut method in the standard commercial solver CPLEX. Special methods for the linear conversion are highlighted. Due to the limited calculation time requirement for the real production and the large scale of the problem, special methods for the efficiency tuning are applied according to the characteristics of the problem. Numerical testing is supported by one of the most advanced semiconductor enterprises and the computational results show significant improvement compared with the traditional manual sequence results.     

Capillary electrophoresis coupled with electrochemiluminescence for determination of cloperastine hydrochloride

Objective To investigate the electrochemiluminescence (ECL) behavior of cloperustine hydrochloride.Methods ECL intensity of tris (2,2'-bipyridyl) rutheniumo(Ⅱ) was enhanced, the method for the determination of dupernstine hydrochloride was established using capillary electrophoresis (CE) coupled with electrochemilumolinescence (ECL) detection. Results Under the optimum conditions, ECL intensity varied linearly with cloperastine hydrochloride concentration from 7.0×10-6 g/mL to 1.0×10-4 g/mL. The detection limit (S/N=3) was 8.05×10-7g/mL. he relative standard deviation of the ECL intensity and the migration time for 11 consecutive injections of 1.0 ×10-5g/mL cloperastine hydrochloride was 2.9% and 1.5%, respectively. This method was successfully applied to eloperastine hydrochloride tablet determination. Conclusion The method has been established, validated and applied for determination of cloperastine hydrochloride.     

高斯-克吕格投影和横轴墨卡托（UTM）投影的异同

介绍在工程测量中使用的2个主要投影的原理和方法,特别在国外测量中常使用的UTM投影和国内常用的高斯投影之间的关系,以及2个投影的异同。结合UTM投影在缅甸工程测量中的应用,分析高斯-克吕格投影与UTM投影的正反解公式。     

道路交通事故紧急救援保障体系与技术支持

我国汽车保有量仅占全球汽车保有量的3%,而每年死于交通事故的人数约占全球死于交通事故人数的15%20%,尤其交通事故致死率是日本等国家的1020倍。本文就此现象进行基本原因的分析,并着重对交通事故紧急救援保障体系与技术支持问题进行探讨。