VVL耦合喷油策略对GDI汽油机混合气形成的影响

利用三维仿真软件Ansys Fluent建立了GDI汽油机的仿真计算模型,就变气门升程耦合不同喷油策略对缸内气流运动和混合气形成的影响进行了模拟计算。结果表明,与大气门升程工况相比,小气门升程工况的缸内湍流运动强度、燃油蒸发和湿壁情况以及点火时刻混合气质量都明显改善;在小气门升程工况,采用两段喷油会缩短油气混合时间,过度推迟二次喷油时刻会恶化混合气质量和燃油湿壁情况;在大气门升程工况,两段喷油会改善混合气均匀性,随着二次喷油时刻推迟,燃油蒸发量增加,湿壁情况加剧,混合气质量得到改善;小气门升程工况下采用二次喷油时刻为470°曲轴转角,前后两次喷油量比例为7∶3的两段喷油方案在燃油蒸发和湿壁以及点火时刻缸内混合气质量这几个方面的效果都很好,是最合理的方案。     

A robust non-Hertzian contact method for wheel–rail normal contact analysis

A modified Kik–Piotrowski (MKP) model is proposed in this paper for an accurate and robust calculation of wheel–rail normal contact problem. The presented method is able to consider the relationship between the elastic deformation of a line and the normal pressure distribution within the contact patch. A novel shape correction method is put forward to correctly describe the elastic deformation of the contact patch. Taking the results estimated by Kalker’s variational method and Kik–Piotrowski method as references, the proposed method is validated by three contact cases, including the assumed standardised non-Hertzian contact and the two-point contact, as well as the contact behaviours based on three actual wheel–rail profiles. The simulation results indicate that, compared with Kik–Piotrowski method, the proposed MKP method achieves better agreement with Kalker’s variational method. Moreover, the MKP method can avoid the abrupt change of wheel–rail normal force due to the sudden transfer of the contact point, which contributes to a better computational stability.     

Numerical Analysis of the Mixture Formation in a Two-Stroke Wall-Guided LPG DI Engine for Extended-Range Electric Vehicle

The use of automotive LPG characteristics which are easy to evaporate vaporization and carry. The paper presents a design of extended-range electric vehicle for wall-guided two stroke LPG engine with direct injection combustion system. Based on the modified vehicle LPG spray model, a database describing the characteristics of vehicle LPG fuel was built and imported into the CFD software. And the accuracy of the model is verified by the Schlieren experimental results. The concentration and velocity field of the mixture in the cylinder under different load conditions are numerically analyzed. The analyzed result indicated that the start injection time θ = 60°–70°CA BTDC under part load condition, the plug electrode near the gathering of a richer mixture is easy to be fired at spark ignition time, the obvious formation of mixture in cylinder is formed and the overall air-fuel ratio is above 40: 1. The start-transition working condition and large load conditions in the piston moves upward before closing the exhaust port to start injection LPG. The optimized LPG injection start time θ ensures that the fresh gas is locked in the cylinder when the exhaust port is closed (63°CA ABDC). In the ignition time of the spark plug, an ideal homogeneous mixture in the cylinder is realized.     

用于车身制造质量控制的白车身测点布置及优化

在对检测点进行分类定义后阐述了车身设计阶段各类测点的布置原则，在此基础上提出了面向制造偏差诊断的测点布置位置优化方法。     

汽车车身复杂钣金件的拓扑优化设计

利用有限元方法，结合零件的造型、约束、受力和模态等特点，对汽车车身复杂钣金件进行了拓扑分析和设计。利用激光模态分析仪对实物进行了模态测量，分析结果和测量结果基本一致。从而验证了拓扑优化方法可以用于复杂钣金件的设计，并可以获得最佳的结构和力学特性。     

具有模块化结构的汽车动力学仿真模型的初步研究

初步探讨了面向开发型驾驶模拟器的具有模块化结构的汽车动力学仿真模型建立方法，从而可以在此基础上进一步建立一套通用的面向结构的汽车动力学仿真程序，便捷地在开发型驾驶模拟器上实现对不同类型或同类型不同结构车辆性能的仿真。     

车辆主动悬架系统的LMS自适应控制

选择LMS自适应滤波算法，通过调整自适应滤波器的权系数使二次性能指标达最小，根据单个样本方差的负梯度来调节权系数；得到控制输出。针对简化的车辆模型，将空钩控制、广义自适应控制与LMS自适应控制相对比。仿真计算表明，主动悬架系统LMS自适应控制策略不仅计算简单，而且理论上在主动悬架系统中的应用是切实可行的，性能明显优于其它对比控制方法。     

沥青路面就地热回收微波技术的探讨

介绍了沥青路面现场加热回收的几种方式．并进行一定的探讨与比较，特别是对微波技术的应用进行了分析。     

中国和美国汽车保险比较——谈投保人对保险费率的影响

汽车保险是我国财产保险中份额最重的一项，随着中国汽车工业的迅猛发展，我国的汽车保险业也将迎来一个黄金期。但是与汽车王国美国相比较，我国汽车保险费率的厘定，更多地关注汽车本身，而忽略投保人这一主体因素，更多地关注人的因素，是加入WTO后的我国汽车保险人值得重视的一个话题。     

系杆拱桥无支架施工探讨

本文结合上海市青浦区蒸浦大桥施工实践 ,简要介绍了钢筋混凝土系杆拱桥无支架施工的工艺。