Two-dimensional numerical simulation of water splash phenomena with and without surface tension

Two-dimensional numerical analyses were conducted and analyzed to simulate water splash produced by free falling object models starting from the resting position. The equilateral prism-shaped object models were allowed to fall onto the free surface of the water. The moving-particle semi-implicit (MPS) method was used to solve the unsteady Navier-Stokes equation for incompressible fluid flows with and without the surface tension effect. Froude numbers of 0.75, 1.0, and 1.25 were used with different model sizes for the entry velocity at the free surface. Splashes obtained by numerical computation closely agreed with the experimental results. The surface tension force, the Froude number, and the Weber number were found in these calculations to play major roles in determining various types of splash shapes. Model size was found to influence splash phenomena, even if the Froude number remained the same. The dependencies on these two nondimensional numbers and the fundamental law of similarity on water splash with and without the surface tension effect were thoroughly investigated in this research. Several two-dimensional numerical simulations are presented in this article to describe the hydrodynamic behaviors of water splash with and without the surface tension effect.     

The nitrogen cycle in tidal flats and eelgrass beds of Ise Bay

A tidal flat-sea grass bed ecosystem model was formulated and applied to Ise Bay to evaluate the purification capability of the shallow-water region where a new airport is expected to be built. The model results were in the range of the observed biomass for each state variable in the model. The purification capability of this shallow-water region is estimated from the model results. The inorganic nitrogen removal is estimated at 56 kg N day⁻¹; the organic particulate nitrogen removal by suspension feeders is 95 kg N day⁻¹; the organic nitrogen removal by harvest and fish predation is 25 kg N day⁻¹, and the purification capability of this site is 51 kg N day⁻¹. Potential loss of the sea grass bed by reclamation will reduce the removal ability of inorganic nitrogen as well as food sources for juvenile fishes.     

Rules for aggregated satisfaction with work commutes

In general trips frequently entail several stages varying in mode, duration, and other factors. In some way travelers aggregate their satisfaction with the stages to satisfaction with the whole trip. In this paper we address the question of how this aggregation is made. We use data from a Swedish survey measuring satisfaction with commutes to and from work and with the stages of the commutes. We test several aggregation rules for their goodness of fit to the observations. Our results show that a normatively correct averaging rule that takes into account the relative durations of the stages out-perform heuristic aggregation rules such as the peak-end, summation, and equal-weight averaging rules. We note that this does not exclude that the heuristic aggregation rules apply to other trips than repetitive commute trips.     

Field experiments and new design of a spilled oil tracking autonomous buoy

It is important to forecast the location of oil spills to realize effective and adequate oil spill response operations when huge oil spilsl occur. In order to enhance the accuracy of oil drifting simulations, one needs to obtain the meteorological and oceanographic data around the oil slick. In general, the drifting velocity vector of an oil spill contains a wind velocity vector and a water current velocity vector. SOTAB-II was developed for autonomous tracking of oil slicks drifting on the sea surface. It is equipped with a sail whose size and direction are controllable to drift along with the oil slick autonomously. In addition, SOTAB-II transmits its location and necessary measured data around it to the land base in real-time. The results of field experiments using SOTAB-II with a cylindrical hull brought us the effectiveness of the sail and its control. However, the drifting speed of SOTAB-II was lower than a theoretical speed for the oil slick. In order to overcome this problem, SOTAB-II was redesigned. A yacht shape was adopted to reduce the hydrodynamic drag in the water in the advancing direction. Transverse stability, scales of brake board and sail, maneuverability, and performance of tracking spilled oil on the sea surface were considered in the process of the design.     

The effects of free surface and end cell on flow around a finite circular cylinder with low aspect ratio

Vortex-induced motion is an oscillatory phenomenon which occurs to a floating body with low aspect ratio. The basic phenomenological study about the effects of free surface and end cell on flow around a finite fixed circular cylinder was investigated in this study using particle image velocimetry and hydrodynamic force measurement. It was found from the former experiment that the wake of the cylinder is influenced by the both end cell and free surface. Blowup and back flow are generated from the end cell, and their effects are suspended by free surface. The result of hydrodynamic force measurement showed the effect of Reynolds number, Froude number, and the aspect ratio of the floating body on the hydrodynamic force. Fluctuating components of hydrodynamic coefficients decrease for increasing Reynolds number, Froude number, and the aspect ratio. On the other hand, the mean drag coefficient increases as Froude number increases and decreases as the aspect ratio increases. The interpretation to these results was discussed in comparison with flow structures observed in the experiment. In addition, it was found that the effect of Reynolds number on the mean drag coefficient changes at different aspect ratios. A possible interpretation to this phenomenon was proposed.     

A study on TLP hull sizing by utilizing optimization algorithm

This paper reports a study on hull sizing for tension leg platforms (TLPs) using an optimization model. At the conceptual or basic design stage of an offshore platform project, hull sizing is one of the most important tasks, having a great impact on later stages of the project. Hull sizing is usually done by an engineering team combining several disciplines and taking account of factors including hydrodynamics, global performance, stability, and structure. This makes it difficult and time-consuming to optimize the hull dimensions. In this study, hull sizing was modeled as an optimization problem in which a range of design criteria had to be satisfied and an objective function minimized. Sizing was then performed using optimization algorithms. For each module, the result calculated by our method was compared with that produced by commercial software (DNV Sesam). Our system was tested for conventional TLP design in three specific metocean environments. Finally, our optimized hull shape was compared with an existing TLP, and the difference in hull shape demanded by each environment was analyzed.     

Hydrodynamic optimization of ship hull forms in shallow water

A computational method for improving hull form in shallow water with respect to wave resistance is presented. The method involves coupling ideas from two distinct research fields: numerical ship hydrodynamics and nonlinear programming techniques. The wave resistance is estimated by means of Morinos panel method, which is extended to free surface flow and considers the influence of finite depth on the wave resistance of ships. This is linked to the optimization procedure of the sequential quadratic programming (SQP) technique, and an optimum hull form can be obtained through a series of iterations giving some design constraints. Sinkage is an important factor in shallow water, and this method considers sinkage as a hydrodynamic design constraint. The optimization procedure developed is demonstrated by selecting a Wigley (C _B = 0.444) hull and the Series 60 (C _B = 0.60) hull, and new hull forms are obtained at Froude number 0.316. The Froude number specified corresponds to a lower than critical speed since most of the ships operating in shallow water move below their critical speed. The numerical results of the optimization procedure indicate that the optimized hull forms yields a reduction in wave resistance.     

神经干细胞经脑室移植后在损伤脊髓的早期动态分布

目的观察神经干细胞经脑室移植后在损伤脊髓的早期动态分布。方法取转录有绿色荧光蛋白(GFP)基因的孕16 d SD鼠胚脑海马组织,培养成神经干细胞球,注射到脊髓损伤鼠第四脑室,通过免疫染色和电镜,观察其在脊髓的存活、分化状况。结果移植细胞在脊髓表面形成细胞团,大多分布于损伤区头侧的腹、背侧两面。细胞团面积背侧小于腹侧;数目背侧多于腹侧,并于术后5 d达到高峰。这种分布和增殖形式见于损伤脊髓正常部分和无损伤脊髓(对照组)。1周时细胞侵入损伤区,分化并表达神经胶质纤维酸性蛋白(GFAP)。2~3周时与宿主细胞良好融合。结论通过脑脊液移植细胞对于损伤性脊髓进行干细胞移植是一种实用、有效的方法。     

Jobs-housing imbalance, spatial correlation, and excess commuting

In this paper, we use continuous urban structure instead of zonal model, try to calculate unbiased excess commuting with joint distribution of homes and workplaces developed by Vaughan (1974), and describe the relationship between urban structure and commuting distance explicitly and theoretically for generalized home-workplace assignment pattern. We simplify the quadrivariate distribution model to a model with three important parameters: the spread of homes, the spread of workplaces, and the spatial correlation of homes and workplaces. Then we show that excess commuting and capacity utilization are expressed by the imbalance and the spatial correlation of jobs-housing structure in a theoretical context, moreover it explicitly evaluates targeting US and Japanese/Korean cities.