The commercialization of East European liner shipping: the experience of Poland

This paper will examine the impact of continuous and increasing change in the shipping sector of Eastern Europe with particular reference to the liner sector in Poland one of the more dynamic markets that has emerged since the political, economic and social changes of the late 1980s. Polish Ocean Lines, and in particular POL Levant, a relatively new, commercialized subsidiary operating in the private sector, are taken as case studies to assess the new structures that are emerging in the marketplace.     

Experimental study of drillship resistance performance in open and closed state of moonpool北大核心CSCD

[Objective] This paper carries out an experimental study of a multi-function dirllship model with moonpool structure in towing tank, aiming at analyzing the effects of the moonpool structure on the ship resistance in open and closure condition.[Methods]Taking a dirllship as the research object, the ship motion response in regular and irregular waves is investigated. The resistance of the ship in hydrostatic water and waves is measured with tension sensors, and the acceleration characteristics of the bow, midship and stern are analyzed by acceleration sensors.[Results]The results indicate that hull resistance under light load conditions is greater when open moonpool, while hydrostatic water resistance with closed moonpool is greater under design load conditions. The closed moonpool in regular waves reduces stern acceleration by 58.2%, bow resistance by 46.7% and heave response by 41.8%. The peak of resistance at the bow in irregular waves is about ten times higher than that at the stern, and the peak of resistance occurs more often when the moonpool is open at the same time.[Conclusions]The experimental study shows that the difference in load conditions changes the waterplane area and affects the hull resistance in hyrostatic water. In contrast, the closure of the moonpool not only reduces acceleration and resistance, but also improves surge and heave. As such, this paper can provide references for the structural design of drillships with moonpools. © 2023 Journal of Nanjing Agricultural University. All rights reserved.     

Location of bus garages

The location of bus garages is a complex issue that has received recent attention in the literature. Given a bus system, the number of bus garages and their locations depend on garage cost, deadheading cost and environmental impacts. An approximate analytical model is used to determine the number of bus garages that minimizes the above costs. The concept of a slowly varying density of bus-route origins (hence deadheads) per unit area is used to model deadheading costs. The increased deadheading caused by breakdowns and accidents is also considered. The garage cost is modeled as a function of the number of buses stored. A closed-form solution is obtained for the optimal density of garages, when the garage cost function is linear. The actual locations of garages and the allocations of buses to the garages are found using a discrete space location-allocation model formulated so as to consider the environmental impact associated with buses deadheading through populated neighborhoods.     

Interactive stated choice surveys: a study of air travel behaviour

Stated preference (SP) experiments are becoming an increasingly popular survey methodology for investigating travel behaviour. Nevertheless, some evidence suggests that SP experiments do not mirror decisions in real markets. With an increasing number of real world decisions made using the internet, an opportunity exists to improve the realism of the SP counterparts of such choices by aligning the choice environment with such online portals. In this paper, we illustrate the benefits of such an approach in the context of air travel surveys. Our survey is modelled on the interface and functionality of an online travel agent (OTA). As with a real OTA, many ticket options are presented. Sort tools allow the options to be reordered, search tools allow options to be removed from consideration, and a further tool allows attributes to be hidden and shown. Extensive use of these tools is made by the 462 respondents. A traditional SP component was also completed by the respondents. Our exploratory analysis as well as random utility model estimation results confirm not only that respondents seem to engage more actively with the interactive survey, but also that the resulting data allows for better performance in model estimation compared to a more conventional SP experiment. These results have implications for the study of other complex travel choices where interactive surveys may similarly be preferable to standard approaches.     

Correlates of bicycling trip flows in Hamilton,Ontario: fastest,quietest, or balanced routes?

Transportation - Bicycling is an increasingly popular mode of travel in Canadian urban areas, like the Greater Toronto and Hamilton Area (GTHA). While trip origins and destinations can be inferred...     

襄阳汉江沉管隧道设计关键技术北大核心CSCD

基于襄阳汉江沉管隧道的工程设计实践,针对该隧道强冲刷、强透水地层深厚、防洪要求高等特点,对隧道平纵布置、管节及接头止水结构、干坞选型及结构、沉管基础及回填、沉管最终接头及对接端止水结构等进行了研究。结果表明:(1)内河沉管隧道采用长距离双轴线干坞布置方式,通过格形地下连续墙、超深落底式帷幕、地下连续墙预应力锚索垂直支护和混凝土封底组合技术解决了强透水地层深基坑支护及隔水难题;(2)采用全断面顺浇技术进行整体式管节预制,实现了管节接头止水设施的全国产化;(3)在内河沉管隧道采用高精度浮式整平先铺卵石基础,并提出了强冲刷区管顶防冲保护解决方案;(4)采用了不设独立止推构造的陆域最终接头,并针对工程需求设置了大直径锁口钢管桩配合外侧止水墙的对接端支护结构及分片整体吊装双壁钢围堰二次止水结构。     

盾构隧道整体道床剥离病害规律研究北大核心CSCD

盾构隧道整体道床的剥离病害已严重影响地铁的安全运营。为研究整体道床剥离病害的规律,文章以国内某运营地铁线路为工程背景,建立整体道床-管片-注浆层数值模型进行分析研究。结果表明:列车轮组作用在道床一侧靠近伸缩缝位置时会引起较大的道床剥离变形,是最不利位置;列车荷载在振动作用下引起的剥离量远大于静载作用时的,且两者间存在函数关系;伸缩缝位置是最易发生剥离的区域,剥离首先发生在伸缩缝两侧边缘,随列车动载作用时间增加,剥离区域扩展至伸缩缝1.5 m范围内;注浆层刚度与接触面黏结强度均是影响剥离量的重要因素,提升注浆层刚度和道床-管片接触面的黏结强度可有效减少剥离量。     

Suboptimal Control Design of Active and Passive Suspensions Based on a Full Car Model

An optimal control design method is introduced and then applied to the optimum design of active and passive suspension systems. A basic three-dimensional 7-DOF car riding model subjected to four correlated random road inputs is considered. The design method is basically developed to allow arbitrary choice of sensors for various car state variables to be used for feedback control of each suspension unit. Previous studies show that full-state control laws and even some limited-state control laws often include feedback gains which are almost zero. Some other gains, although not zero, don't play an important role in improving the system performance measures. With the method proposed in this work, every suspension unit can have its own feedback measurements and the criterion function can be related to all state and control variables. Thus a large number of active and semi-active suspension systems with full- or limited-state control laws based on different measurement combination can be suggested, studied, and compared with each other. Instead of comparing these optimized active and semi-active suspension systems with a basic, passive suspension, the passive system itself is optimized with the same criterion. Simulations in the time domain and frequency analyses are performed, and comparisons are made among the systems in terms of r.m.s. car response measures and ISO riding comfort criterion.     

A repeated cross-sectional evaluation of car ownership

This paper studies changes in the relationship between household car ownership and income by household type. Ordered response probit models of car ownership are estimated for a sample of households repeatedly at six time points to track the evolution of income elasticities of car ownership over time. Elasticities of car ownership are found to change over time, questioning the existence of a unique equilibrium point between demand and supply that is implicitly assumed in traditional cross-sectional discrete choice car ownership models. Moreover, different household types and households that underwent household type transitions showed differing patterns of change in elasticities. Observed trends in car ownership and income clearly show behavioral asymmetry where the elasticity of procuring an additional car is greater than that of disposing a car. This too shows the inadequacy of traditional cross-sectional models of car ownership which tend to predict symmetry in behavior. The study suggests the importance of incorporating dynamic trends into the forecasting process, which can be accomplished through the use of longitudinal data.