Development of an intelligent CAE system for auto-body concept design

The concept design phase is a critical step in auto-body design, as it has a great effect on later design work. This paper describes the implementation of an auto-body structure design in the early stages of a new auto-body developing program. In order to reduce the long design period and analysis error that plagues traditional auto-body concept design, an intelligent CAE system has been successfully developed and implemented based on the UGS NX/API opening platform. This system, the so-called ACD-ICAE (Auto-body concept design-intelligent computer aided engineering) System that means concept design-intelligent computer aided engineering system, employs a fully parametrized template method to build the conceptual auto-body geometry model and FEM model quickly and easily. It also integrates auto-body modeling, analysis and optimization on only one CAD platform via a parametric variables database. Moreover, all parametric variables are shared and updated in different phases of the ACD-ICAE System. A wizard User Interface (UI) based on knowledge of auto-body engineering was developed and used in this system. The procedures implementing the functional diagram of the ACD-ICAE system are also provided. A typical example of a car body concept design with four doors shows that the ACD-ICAE system is efficient and accurate.     

盾构法水下隧道工程技术的发展

盾构是建造穿越江河、海峡水下隧道的主要工法之一,其工程技术的现代发展趋势主要针对隧道大断面、高地下水头和长掘进距离等3大方面。文章就已建成的几大标志性盾构法水下隧道工程（英法海峡隧道、日本东京湾公路隧道、荷兰西斯凯尔特河隧道、德国易北河第四通道隧道、上海崇明长江通道隧道）就其工程规模和技术特点,讨论水下隧道盾构工法的技术发展。     

Calculation of vaulted magnetic field above ship using equivalent surface magnetic charge北大核心CSCD

[目的]为了获得舰船上方不同高度平面磁场数据,解决舰船上方拱顶磁场推算到平面磁场的问题,提出用面磁荷法进行舰船上方的磁场推算。[方法]从等效源理论出发,利用拱顶磁场数据进行反演建模,将舰船磁场等效为面磁荷产生的磁场,用面磁荷正演舰船上方的磁场。将面磁荷法推算出的磁场与舰船实际磁场进行对比,验证面磁荷法的可行性。[结果]通过数值仿真计算,舰船磁场垂直分量推算的相对均方根误差为0.44%;利用磁性船模进行实验分析,磁场垂直分量推算的相对均方根误差为7.64%。[结论]仿真和船模实验分析表明,利用面磁荷法进行磁场推算,其推算值与测量值较为吻合,推算的相对均方根误差较小,具有较高的精度,可用于实际工程计算。     

Impact of high occupancy vehicle lanes on carpooling behavior

High occupancy vehicle lanes have become an integral part of regional transportation planning. Their purpose is to increase ridesharing by offering a travel time advantage to multiple occupant vehicles. This paper examines the extent to which an HOV facility increases ridesharing. Using data from the Route 55 HOV facility in Orange Country, California, changes in the carpooling rate on Route 55 are compared to that of a control group of freeway commuters. The analysis shows that the carpooling rate among peak period commuters, and particularly those who use the entire length of the facility, has increased. However, there has been no significant increase in ridesharing among the entire population of Route 55 commuters. Results suggest that barriers to increased ridesharing are formidable, that travel time savings must be large in order to attract new carpoolers, and that further increases in capooling will likely require development of extensive HOV lane systems.     

Provision of accessible transportation alternatives for the transportation handicapped in Taiwan

Four transportation handicapped groups are identified in Taiwan (impaired ambulation, visually impaired, aged, and others) and nine accessible transportation alternatives are proposed. The costs and potential ridership for these nine alternatives in the Taipei area are estimated. Using analytic hierarchy process (AHP) and multicriteria evaluation with qualitative and quantitative data (MEQQD) methods, the most appropriate accessible transportation alternatives for each of the four handicap groups are selected. It is found that the best accessible transportation alternative for the impaired ambulation, the aged, and others would be a demand-responsive lift-equipped specialized van, while half-fare subsidized taxi would be the second-best option. By contrast, the best alternative for the visually impaired would be half-fare subsidized taxi, while conventional bus with broadcast equipment would be the second-best choice.     

�����еĶ�ά����ģ�ⷽ��Ӧ������

由于在模拟密集网络、宏观问题和方案阶段中的优势，连续性模拟方法应用到交通模型的模拟中，正在得到越来越多的关注。此论文意在为二维连续模拟方法的发展和应用提供综合的概括。首先讨论的是理论的发展和对特殊的或多变领域机理的模拟，然后再针对连续模拟方法应用到工厂选址、道路选择、人行道的规划、政策和社会经济分析进行评论。最后，预测其未来研究的前景。     

Semi-active control of tracked vehicle suspension incorporating magnetorheological dampers

In past years, the application of magnetorheological (MR) and electrorheological dampers in vehicle suspension has been widely studied, mainly for the purpose of vibration control. This paper presents theoretical study to identify an appropriate semi-active control method for MR-tracked vehicle suspension. Three representative control algorithms are simulated including the skyhook, hybrid and fuzzy-hybrid controllers. A seven degrees-of-freedom tracked vehicle suspension model incorporating MR dampers has been adopted for comparison between the performance of the three controllers. The model differential equations are derived based on Newton's second law of motion and the proposed control methods are developed. The performance of each control method under bump and sinusoidal road profiles for different vehicle speeds is simulated and compared with the performance of the conventional suspension system in time and frequency domains. The results show that the performance of tracked vehicle suspension with MR dampers is substantially improved. Moreover, the fuzzy-hybrid controller offers an excellent integrated performance in reducing the body accelerations as well as wheel bounce responses compared with the classical skyhook and hybrid controllers.     

Simulation model of an electrohydraulic-actuated double-clutch transmission vehicle: modelling and system design

Automated and manual transmissions are the main link between engine and powertrain. The technical term when the transmission provides the desired torque during all possible driving conditions is denoted as powertrain matching. Recent developments in the last years show that double-clutch-transmissions (DCTs) are a reasonable compromise in terms of production costs, shifting quality, drivability and fuel efficiency. They have several advantages compared to other automatic transmissions (AT). Most DCTs nowadays consist of a hydraulic actuation control unit, which controls the clutches of the gearbox in order to induce a desired drivetrain torque into the driveline. The main functions of hydraulic systems are manifold: they initiate gear shifts, they provide sufficient oil for lubrication and they control the shift quality by suitably providing a desired oil flow or pressure for the clutch actuation. In this paper, a mathematical model of a passenger car equipped with a DCT is presented. The objective of this contribution is to get an increased understanding for the dynamics of the hydraulic circuit and its coupling to the vehicle drivetrain. The simulation model consists of a hydraulic and a mechanical domain: the hydraulic actuation circuit is described by nonlinear differential equations and includes the dynamics of the line pressure and the proportional valve, as well as the influence of the pressure reducing valve, pipe resistances and accumulator dynamics. The drivetrain with its gear ratios, moments of inertia, torsional stiffness of the rotating shafts and a simple longitudinal vehicle model represent the mechanical domain. The link between hydraulic and mechanical domain is given by the clutch, which combines hydraulic equations and Newton's laws. The presented mathematical model may not only be used as a simulation model for developing the transmission control software, it may also serve as a virtual layout for the design process phase. At the end of this contribution a parametric study shows the influence of the mechanical components, the accumulator and the temperature of the oil.     

Subjective absolute discomfort threshold due to idle vibration in passenger vehicles according to sitting posture

Idle vibration, occurring when a vehicle comes to a stop while the engine is on, is known to be a main cause of discomfort for passengers, and the customer effect has been recently growing. The frequency of idle vibration is determined by the engine type. To lower the vibration, various technologies have been applied to optimize the engine mount and vehicle body structure. In addition to the technological developments, research on human response with a consideration of idle vibration is needed to effectively reduce the level of discomfort experienced by passengers. Seats aimed at enhancing static comfort influence the sitting posture of passengers; sitting posture is a factor affecting human body characteristics that response to idle vibration. This study examined the absolute discomfort threshold of idle vibration according to the sitting postures of 13 taxi drivers. The four sitting postures of subjects on a rigid-body seat without a backrest were variables in the determination of absolute discomfort threshold of idle vibration. The absolute discomfort threshold curves obtained in this experiment were less sensitive to frequency changes than the frequency weighting function of ISO 2631-1.     

Static Load Test of Low Vibration Track under Heavy Haul TrainEI北大核心

Research purposes: Low vibration track is a suitable track structure in the heavy haul railway long tunnel. Taking the low vibration track in the middle-south channel tunnel as the research object, through the full-scale model static load test, this paper studies the mechanical properties of a single bearing block under the vertical load at the end of the track bed slab (working condition 1), the horizontal and vertical load at the end of the track bed slab (working condition 2), the vertical load at the middle of the track bed slab (working condition 3) and track's crack development trend. Research conclusions:(1) Taking the static load of 30 t axle load train as a reference, the track slab and bearing block concrete of working condition 1 reach the axial tensile strength at 3.3 and 3.1 times static wheel load, the track slab and bearing block concrete of working condition 2 reach the axial tensile strength at 3.0 and 3.1 times static wheel load, the track slab and bearing block concrete of working condition 3 reach the axial tensile strength at 4.9 and 2.9 times static wheel load. (2) Track slab's crack of working condition 1 appears at the corner of the bearing block and the midline of the long side of the bearing block and extends to the short side of the track slab. The crack extension at the corner point is in the shape of "eight". There is no obvious crack of working condition 3 in the track slab. (3) The horizontal load of the train leads to the increase of the force of the concrete in the corner of the bearing block. (4)The research results have guiding significance for the design, construction and maintenance of low vibration track. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.