Strong bottom–up effects on phytoplankton community caused by a rainfall during spring and summer in Sagami Bay,Japan

To assess the consequences of bottom-up effects on phytoplankton community composition during the rainy season, phytoplankton levels and environmental factors were monitored daily from 12 April to 22 July 2003 in Sagami Bay, Japan. The relevant environmental factors were analyzed using cross-correlation analyses. Based on time-series analysis, low surface salinity conditions lasting 0 or 2 days after heavy rainfalls resulted in significant nutrient loading, such as dissolved inorganic nitrogen (DIN), into the coastal area. Also, Chlorophyll-a (Chl-a) concentration frequently increased 2 and 6 days after rainfall. Based on the high total Chl-a concentration, the time was divided into three periods, from 1 to 11 May (Period A), 26 May to 9 June (Period B) and 30 June to 22 July (Period C). The phytoplankton assemblages during Period A were dominated by two dinoflagellates, Ceratium furca and Ceratium fusus. Prior to these species blooming, the heterotrophic dinoflagellate Noctiluca scintillans was dominant. During Period B, the phytoplankton communities were dominated primarily by the diatoms Rhizosolenia delicatula, Hemiaulus sinensis and Navicula spp. Finally, Cerataulina dentata, Rhizosolenia spp., Lauderia borealis and Neodelphineis pelagica were dominant during Period C. After increases in phytoplankton abundance, available nitrogen (N) and phosphorous (P) were consumed and exhausted, which were considered a potential cause of the shift in the dominant organisms from large diatoms to pico- and nano-plankton in the low Chl-a environment. In particular, silicate (Si) was not a major limiting factor for phytoplankton production, since the Si:DIN and Si:P ratios clearly demonstrated that there were no any potential stoichiometric Si limitations, and almost all silicate concentrations were > 2.0 µM during this study. Our results reveal that nutrient sources supplied by river discharge are a main cue for strong bottom–up effects on algal bloom succession during the early summer season in Sagami Bay.     

Assessing the performance of SpeedInfo radar traffic sensors

Traffic speed is a crucial input for real-time traffic management applications. Operating agencies typically deploy their own sensors to collect the measurements, e.g., loop detectors. Recently, SpeedInfo emerged with a different paradigm for traffic speed collection: instead of selling hardware to operating agencies, at each link the company deploys its own Doppler radar in a self-contained wireless unit to measure traffic speeds and then sells the speed data. This study uses well-tuned loop detector-based speed measurements to evaluate 15 of the Doppler radar sensors over several months while the two traffic data collection systems were operating concurrently. The extended study period includes potentially challenging and transient conditions for the radar sensors: both recurrent (rush hour congestion and late night low flow) and nonrecurrent (incidents and precipitation). The analysis took a broad overview, comparing speed measurements from the radar sensors against the concurrent loop detector data and then explicitly looked for any anomalous pattern in the radar data such as latency and system outages. The work found the radar measurements are generally good, but also identified several points that should be considered before deployment, including latency, different biases in free flow and congestion, vulnerability to precipitation, and sensitivity to mounting angle.     

Development of a low-noise cooling fan for an alternator using numerical and doe methods

An alternator, which converts mechanical rotational energy into electrical energy, is an important component of a vehicle. Alternators operate over a broad range of rotational speeds, typically from 3,000 RPM to 18,000 RPM, which demands a cooling fan producing sufficient airflow, ideally with a minimum of noise. In the current study, an optimized alternator-cooling fan was developed through a linked DOE(Design OF Experiment) process and numerical analysis. The SC/Tetra and FlowNoise S/W programs were used to calculate flow rates and noise levels, respectively, for the newly developed fan. Compared with original model, the numerical results predicted a 3 dBA noise reduction; the measured reduction was 4 dBA.     

Development of a navigation algorithm with dead reckoning for unmanned ground vehicles

A navigation algorithm is indispensable for Unmanned Ground Vehicles (UGVs). During driving, UGVs follow a global path. In this study, we propose a navigation algorithm using Real Time Kinematic (RTK)-Differential Global Positioning System (DGPS) units and encoders to complement global path planning. Sometimes GPS systems lose their signals and receive inaccurate position data due to many factors, such as edifice and barrier obstructions. This paper shows that GPS deviations can be solved using a Dead Reckoning (DR) navigation method with encoders and that position errors can be decreased through the use of RTK-DGPS units. In addition to this method, we will introduce a new waypoint update algorithm and a steering algorithm using RTK-DGPS units.     

Modified lateral control of an autonomous vehicle by look-ahead and look-down sensing

This paper presents a modified lateral control method for an autonomous vehicle with both look-ahead and look-down sensing systems. To cope with sensor noise and modeling uncertainty in the lateral control of the vehicle, a modified LMI-based H lateral controller was proposed, which uses the look-ahead information of the lateral offset error measured at the front of vehicle and the look-down information of the vehicle yaw angle error between the reference lane and the centerline of the vehicle. To verify the safety and the performance of the lateral control, a scaled-down vehicle was developed, and the positioning of the vehicle was estimated with USAT. The proposed controller, which uses both look-ahead and look-down information, was tested for lane changing and reference lane tracking with both simulation and experiment. The simulation and experimental results show that the proposed controller has better tracking and handling performance compared with a controller that uses only the look-ahead information of the target heading angle error.     

Piston-temperature measuring system using electromagnetic induction with verification by a telemetry system

The development of an inner-piston-chamber temperature measurement system is a necessary step in engine development or when solving other fundamental problems related to automotive engines. There are various pre-existing measurement methods available, e.g., the linkage method, piston telemetry, templog, and the electromagnetic induction method. In this study, we first redesigned the coil sensor used in the electromagnetic induction method using PEEK and then used Taguchi methods to reduce the number of experiments in the development process and finally utilized piston telemetry via Bluetooth to verify the precision and accuracy of the redesigned PEEK coil sensor and electromagnetic induction method. The results displayed a reproducibility within 0.5 degrees and an accuracy within 2 degrees Celsius.     

Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

Quality evaluation of car window motors using sound quality metrics

In this paper, a method to establish a decision criterion to evaluate the quality of small window motors using sound quality (SQ) metrics is suggested. Although the sound level radiated from the motor is relatively small compared to other sounds in a car, the sound from an abnormal motor gives an uncomfortable feeling and the impression of abnormal operation, which can lead to customer complaints. To construct an objective decision criterion, the correlation between the SQ metrics and the subjective decision on the passing or failure of the motor were investigated. Four representative SQ metrics, viz., loudness, sharpness, roughness, and fluctuation strength, were calculated for the collected samples. It was observed that the loudness and roughness of the motor sample group classified as abnormal was higher than those of the normal motors. For a single figure rating for motor quality, an evaluation index for the motor sound was generated by combining the correlated SQ metrics with proper weightings. Evaluation results on the specimens that were not employed in generating the quality evaluation index showed a reasonable agreement with the subjective test at 73%. The suggested quality check method can replace the current subjective decision procedure to identify the faulty motors.     

Damper modeling for dynamic simulation of a large bus with MR damper

In this study, a large bus is tested to measure its dynamic response by the single-lane change test and the rapid stop test. A full car model is established by ADAMS/Car for computer simulation. For multibody modeling of a large bus, user-defined templates are used in the simulation. Simulation results of the single-lane change test and the rapid braking test are compared to the results of the physical experiments, in which several sensors are installed to measure the vehicle’s responses. The results obtained from the simulation show good agreement with the tests’ results. A dynamic model for the MR(magnetic-rheological) damper is also developed by employing the Magic Formula model, which is widely used in the nonlinear modeling of a tire. Bump simulation of a full car with the MR damper is carried out to verify the performance of the MR damper. The comparison of the simulation results obtained with the MR damper model to the results obtained with the traditional passive damper model showed improved response of the vehicle with the MR damper.