An analysis of Metro ridership at the station-to-station level in Seoul

While most aggregate studies of transit ridership are conducted at either the stop or the route level, the present study focused on factors affecting Metro ridership in the Seoul metropolitan area at the station-to-station level. The station-to-station analysis made it possible to distinguish the effect of origin factors on Metro ridership from that of destination factors and to cut down the errors caused by the aggregation of travel impedance-related variables. After adopting two types of direct-demand patronage forecasting models, the multiplicative model and the Poisson regression model, the former was found to be superior to the latter because it clearly identified the negative influences of competing modes on Metro ridership. Such results are rarely found with aggregate level analyses. Moreover, the importance of built environment in explaining Metro demand was confirmed by separating built environment variables for origin and destination stations and by differentiating ridership by the time of day. For morning peak hours, the population-related variables of the origin stations played a key role in accounting for Metro ridership, while employment-related variables prevailed in destination stations. In evening peak hours, both employment- and population-related variables were significant in accounting for the Metro ridership at the destination station. This showed that a significant number of people in the Seoul metropolitan area appear to take various non-home-based trips after work, which is consistent with the results from direct household travel surveys.     

Dynamic Bandwidth Analysis for Coordinated Arterial Streets

A commonly used strategy for improving mobility along signalized arterials is to coordinate neighboring intersections to minimize vehicle stops by maximizing the duration of green bands, otherwise known as arterial bandwidth. Signal coordination has been researched, developed, and refined for five decades. In lieu of traditional methods that are based on the analysis of programmed green times (which assume all phases operate at their maximum settings), a dynamic bandwidth analysis method is presented that reproduces actual dynamic bandwidth durations using closed loop signal data. The analysis is intended to help assess the performance of semi-actuated coordinated signal systems on arterial streets. In addition, the study highlights the arterial progression benefits that result from changing coordinated intersection offsets based on optimizing the dynamic, rather than the programmed, bandwidths. Detailed analysis at three arterial sites revealed that coordinated green phase time distributions are complex and multimodal and cannot be represented by a single-valued statistic. Dynamic bandwidth analysis confirmed that programmed green bandwidth consistently underestimates the size of the actual dynamic bandwidth, and exhaustive search results highlighted the potential for further improvements in coordination. Future research will include field and simulation comparative studies and the development of efficient methods for dynamic bandwidth optimization.     

迈向可持续的公共交通之路--首尔公交改革的经验与成就(连载)

2004年7月1日,首尔市政府在全市开展了深刻的针对公交系统的整合性改革,这一举措成为迈向可持续性城市交通的重要一步.这次公交改革成功实施的关键在于它将管理机构、创新技术、基础设施的建设以及公交的组织和运营融为一体.经过一系列改革之后,首尔的交通面貌焕然一新：通过进一步协调交通运输容量和需求之间的矛盾,提高了运营效率,增加了乘客人数,使公交运营商的收入自启动集成收费系统之后得到增加.     

Prediction of the maneuverability of a large container ship with twin propellers and twin rudders

The maneuvering characteristics of a large container ship with twin propellers and twin rudders were investigated using the horizontal planar motion mechanism (HPMM) test and computer simulation. A mathematical model for maneuvering motion with four degrees of freedom (DOF) for twin-propeller and twin-rudder systems was developed and included the effects of roll motion. To obtain the roll-coupling hydrodynamic coefficients of a container ship, a four-DOF HPMM system having a roll motion mechanism and a roll moment measurement system was used. At the full load condition, HPMM tests were carried out for two different 12 000-TEU container ship models, one with twin propellers and the other with a single propeller. Using the hydrodynamic coefficients obtained from the tests, computer simulations were carried out. Simulation results for the container ship with twin propellers and twin rudders were compared with the results for the container ship with a single propeller and single rudder.     

Design of Optimal Four-Wheel Steering System

Optimal design of the four wheel steering (4WS) system of the ground vehicle is studied. 4WS vehicles with the optimal control scheme are considered first. General formulation of the optimal control law is developed based on the linear quadratic regulator theory. The vehicle speed function (VSF) based 4WS vehicle with a simple feedback controller is considered as a special case of the optimal system. Two new designs of the VSF 4WS system are proposed and their performances are compared with the optimal 4WS systems and the existing VSF 4WS system. The first system is designed for the maximum stability while the second system is designed to emulate the response of the optimal 4WS vehicle. Advantages of the new VSF designs are discussed.     

The role of congestion of transportation networks in urban location and travel choices

Congestion of urban transportation systems results from an equilibrium of location and travel choices with generalized travel costs which increase with vehicle flows as well as other factors. The use of network equilibrium concepts in analyzing urban policies and evaluating alternative plans is examined. Issues arising in the use of network equilibrium models are described, and formulations of urban network prediction and design models are explored.     

Vehicle Dynamic Analysis and Evaluation of Continuously Controlled Semi-Active Suspensions Using Hardware-in-the-loop Simulation

A semi-active suspension system with continuously variable damper is greatly expected to be used mainly in the future as a high-performance suspension system due to its cost-effectiveness, light weight, and low energy consumption. In this paper, to develop a suitable control logic for the semi-active suspension system, the hardware-in-the-loop simulation is performed for the experimental continuously variable damper combined with a quarter-car model, and the simulation results are compared for passive, on/off controlled, and continuously controlled dampers in the aspects of ride comfort and driving safety, assuming each damper to be installed on the vehicle.     

Design factor optimization of 3D flash lidar sensor based on geometrical model for automated vehicle and advanced driver assistance system applications

Sensor technologies have been innovated and enhanced rapidly for highly automated vehicle and advanced driver assistance systems (ADAS) in automotive industry; however, in order to adopt sensors into mass production vehicle in near future, various requirements should be satisfied such as cost, durability, and maintainance without any loss of overall performance of the sensors. In this sense, a 3D flash lidar is one of primising range sensors because of no moving parts, compact package, and precise measure for distance by using a laser. In spite of the several advantages, the 3D flash lidar is not commonly used in automotive industry because it is quite expensive for adoption and it is manufactured with only general purpose currently; therefore, the cost reduction and optimal design to satisfy various purposes of ADAS or autonomous driving should be accomplished. In this paper, we propose a novel approach for design factor optimization of the 3D flash lidar based on a geometrical model by using structural similarity between the 3D flash lidar and 2D digital camera. In particular, focal length and area of a receiver (focal plane array and read-out integrated circuit) which directly affect on sensor performance (field of view and maximum detection range) are optimized as the design factors. From the optimization results in simulation, we show that optimal design factors according to various purposes required in ADAS could be easily determined and the sensor performances could be evaluated before manufacturing. It will reduce temporal and economic burdens for design and manufacturing in development process.     

Path optimization for marine vehicles in ocean currents using reinforcement learning

This study proposes a path planning algorithm for marine vehicles based on machine learning. The algorithm considers the dynamic characteristics of the vehicle and disturbance effects in ocean environments. The movements of marine vehicles are influenced by various physical disturbances in ocean environments, such as wind, waves, and currents. In the present study, the effects of ocean currents are the primary consideration. A kinematic model is used to incorporate the nonholonomic motion characteristics of a marine vehicle, and the reinforcement learning algorithm is used for path optimization to generate a feasible path that can be tracked by the vehicle. The proposed approach determines a near-optimal path that connects the start and goal points with a reasonable computational cost when the map and current field data are provided. To verify the optimality and validity of the proposed algorithm, a set of simulations were performed in simulated and actual ocean current conditions, and their results are presented.     

Estimating vehicle miles traveled (VMT) in urban areas using regression kriging

The recent increase in demand for performance‐driven and outcome‐based transportation planning makes accurate and reliable performance measures essential. Vehicle miles traveled (VMT), the total miles traveled by all vehicles on roadways, has been utilized widely as a proxy for traffic impact assessment, vehicle emissions, gasoline consumption, and crashes. Accordingly, a number of studies estimate VMT using diverse data sources. This study estimates VMT in the urban area of Bucheon, South Korea, by predicting the annual average daily traffic for unmeasured locations using spatial interpolation techniques (i.e., regression kriging and linear regression). The predictive performance of this method is compared with that of the existing Highway Performance Monitoring System (HPMS) method. The results show that regression kriging could provide more accurate VMT estimates than the HPMS method and linear regression, especially with a small sample size. Copyright © 2016 John Wiley & Sons, Ltd.