Co-operative control for regenerative braking and friction braking to increase energy recovery without wheel lock

This paper presents a regenerative braking co-operative control algorithm to increase energy recovery without wheel lock. Considering the magnitude of the braking force available between the tire and road surface, the control algorithm was designed for the regenerative braking force at the front wheel and friction braking force at the rear wheel to be increased following the friction coefficient line. The performance of the proposed regenerative braking co-operative control algorithm was evaluated by the hardware in the loop simulation (HILS) with an electronic wedge brake on its front wheels and an electronic mechanical brake on its rear wheels. The HILS results showed that a proper braking force on the front and rear wheels on a low μ road prevented the lock of the front wheels that was connected to the motor, and maintained the regenerative braking and increased energy recovery.     

Automatic parking of vehicles: A review of literatures

Collision accidents often occur during parking or reversing cars. In allusion to this point, this paper conducts a review of literatures on automatic parking. To begin with, a brief introduction of automatic parking including its background and significance is given. Then its commercial application, research status and latest progress are summarized which include visual perception, ultrasonic sensors and radar technology, path planning, control algorithms based on fuzzy theory, neural network, image processing and recognition technology, and digital signal processing technology, etc. On further analysis, some reasonable conclusions are drawn and the future work is suggested.     

Virtual product development for an automotive universal joint

Constant velocity universal joints play a very important role in automotive drivelines. The traditional development method, based on a physical prototype and experimenting, is time consuming and costly. This test-based method does not easily identify rational design clues. Therefore, a virtual product development method, which is based on dynamics modeling and simulation, is necessary. Virtual prototyping for a universal joint has been developed using the simulation software package MSC.ADAMS. Dynamics simulation has been performed to predict and evaluate joint behaviors. This virtual product development method has been implemented by the WanXiang Group Co., which is one of the most famous Chinese automotive component manufacturers.     

Full-slip kinematics based estimation of vehicle yaw rate from differential wheel speeds

Vehicle yaw rate is a key parameter required for various active stability control systems. Accurate yaw rate information may be obtained from the fusion of some on-vehicle sensors and GPS data. In this study, the closed-form expression of the yaw rate–written as a function of front wheel rolling speeds and steering angle–was derived via kinematic analysis of a planar four-wheel vehicle on the assumption of no longitudinal slip at the both front tires. The obtained analytical solution was primarily verified by computational simulation. In terms of implementation, the 1:10th scaled rear-wheel-drive vehicle was modified so that the front wheel rolling speeds and the steering angle could be measured. An inertial measurement unit was also installed to provide the directly measured yaw rate used for validation. Preliminary experiment was done on some extremely random sideslip maneuvers beneath the global positioning using four recording cameras. Comparing with the vision-based and the gyro-based references, the vehicle yaw rate could be well approximated at any slip condition without requiring integration or vehicle and tire models. The proposed cost-effective estimation strategy using only on-vehicle sensors could be used as an alternative way to enhance performance of the GPS-based yaw rate estimation system while the GPS signal is unavailable.     

Effect of tumble-home on roof strength of a vehicle

This study reports on the effect of vehicle tumble-home (side body inclination) on roof strength. The steep inclination of the side body of a vehicle increases its roof strength. Comprehensive analysis of the impact of high roof strength driven by the steep inclination on dynamic roof strength in rollover is described. Here, we have developed a numerical model using the ADAMS, which is capable of characterizing both of the static and the dynamic roof strength. According to the FMVSS 216 protocol, we achieve the strength to weight ratio (SWR; static roof strength) by applying loading plates to the roof of a vehicle. The Controlled Rollover Impact System (CRIS) allows us to quantitatively characterize the displacements of the top end of A-pillar and B-pillar, thus determining the dynamic roof strength by comparing the results. We demonstrated that the roof intrusion was one of the most critical causes which lead to injuries of occupants fastening seat belts. Our analysis revealed that the increase of the side body inclination of vehicles enhanced the static roof strength whereas it could not reduce the roof displacement (intrusion) in the dynamic rollover.     

Loosening analysis for fastening screw of automotive door trim parts

While a screw is a fastening element that can tighten the two parts at low cost, the loosening of the screw is generated due to external forces such as repetitive load, vibration, and thermal stress. This phenomenon decreases the initial clamping force, and this can be a serious problem to the safety of the product. However, while fastening parts are handled through experiment and experience, there is a lack of research on the screw loosening of plastic fastening parts. For example, vehicles have various fastening parts. Among the fastening elements, screws are typically used for tightening parts of the vehicle door trim. Vehicle interior materials are mainly composed of plastic parts. Especially, the temperature of the vehicle interior changes from a sub-zero temperature to 100 degrees (°C) due to solar radiation. Unlike metals, plastic materials are commonly susceptible to the environment. In this study, the fastening screw of automotive door trim parts is selected. First, a screw loosening mechanism is implemented through Computer Aided Engineering (CAE) analysis and the influences of degradation are then analyzed. Secondly, the selecting method of clamping force is suggested through the analysis result of reduction according to the tightening torque.     

Automotive window seal design considering external aerodynamic load and surrogate constraint modeling

Installed between metallic DIW (Door in White) panel and nonmetallic door glass, automotive window seals has great influence on customers’ perception of NVH (Noise-Vibration-Harshness) performance. Recently, aerodynamic effect on ride comfort attracts increasing research interest. The external load causes unsteady pressure on glass, which is finally transferred to window seals and leads to complicated vibration and increases interior noise level. However, non-linearities of hyper-elastic material, rubber-glass contact and large deformation behavior make the construction of window seals constraint model much more difficult, thus impeding further analysis and optimization. A new window seal design method is proposed featuring in considering aerodynamics-induced load and nonlinear constraint. Firstly, by SST ? k ? ε (Shear Stress Transport) turbulence model, external flow field of full-scale automotive is established by solving three-dimensional, steady and uncompressible Navier-Stokes equation. With re-exploited mapping algorithm, the overall aerodynamic pressure is extracted and matched to local window as external loads for seals, thus taking into account high speed fluid-structure interaction. Secondly, based on functional equivalence and mathematical fitting, new surrogate constraint model is presented. The unitedseal CLD (Compression Load Deflection) curve is synthesized after translations and transformations from two semi-seal CLD experimental measurements of inner and outer lips. It is then fit to complex exponential function, making seal constraint equivalent to a surrogate elastic constraint with variable stiffness. Experiment is performed to verify the constraint surrogation effectiveness. Finally, case study of window seal design under high speed is investigated. After seal optimization based on the new method, windows seals’ maximal displacements have decreased. The improved seal-glass fitting status shows better NVH quality of window seal in high-speed condition.     

Cooling performance of 25 kW in-wheel motor for electric vehicles

The in-wheel motor used in electric vehicles was designed and constructed for an electric direct-drive traction system. It is difficult to connect cooling water piping to the in-wheel motor because the in-wheel motor is located within the wheel structure. In the air cooling structure for the in-wheel motor, an outer surface on the housing is provided with cooling grooves to increase the heat transfer area. In this study, we carried out the analysis on the fluid flow and thermal characteristics of the in-wheel motor for various motor speeds and heat generations. In order to resolve heat release, the analysis has been performed using conjugate heat transfer (conduction and convection). As a result, flow fields and temperature distribution inside the in-wheel motor were obtained for base speed condition (1250 rpm) and maximum speed condition (5000 rpm). The thermo-flow analysis of the in-wheel motor for vehicles was performed in consideration of ram air effect. Also, in order to improve cooling effect of the motor, we variously changed geometries of housing. Therefore, we confirmed the feasibility of the air cooling for the motors of 25 kW capacity with housing geometry having cooling grooves and investigated the cooling performance enhancement. We found that the cooling effect was most excellent, in case that cooling groove direction was same with air flow direction and arranged densely.     

Experimental investigation and comparison of nanoparticle emission characteristics in light-duty vehicles for two different fuels

In recent years, particle number emissions rather than particulate mass emissions in automotive engines have become the subject with controversial discussions. Recent results from studies of health effects imply that it is possible that particulate mass does not properly correlate with the variety of health effects attributed to engine exhaust. The concern is now focusing on nano-sized particles emitted from I. C. engines. In this study, particulate mass and particle number concentration emitted from light-duty vehicles were investigated for a better understanding of the characteristics of the engine PM from different types of fuels, such as gasoline and diesel fuel. Engine nano-particle mass and size distributions of four test vehicles were measured by a condensation particle counter system, which is recommended by the particle measurement program in Europe (PMP), at the end of a dilution tunnel along a NEDC test mode on a chassis dynamometer. We found that particle number concentrations of diesel passenger vehicles with DPF system are lower than gasoline passenger vehicles, but PM mass has some similar values. However, in diesel vehicles with DPF system, PM mass and particle number concentrations were greatly influenced by PM regeneration. Particle emissions in light-duty vehicles emitted about 90% at the ECE15 cycle in NEDC test mode, regardless of vehicle fuel type. Particle emissions at the early cold condition of engine were highly emitted in the test mode.     

Hybrid three-dimensional mesh generation from quad-dominant surface meshes

A hybrid mesh generation algorithm using a modified plastering method for three-dimensional objects with variable thickness is presented. The method starts with a quad-dominant surface mesh and generates layered elements with variable thickness by using adaptive offsetting, resulting in hex-tet dominant mesh generation. Hexahedral and prismatic meshes are generated by the inward offsetting of the initial boundary mesh. In order to generate a conforming mesh, pyramid elements are constructed on top of hexahedral elements, and tetrahedral elements are generated for the remaining domain by using an advancing front method. This method is applied to several different geometries, and the effectiveness of the proposed algorithm is demonstrated.