Numerical study on bank effects for a ship sailing in shallow channel

A numerical study on bank effects in shallow channels is carried out by using a first-order Rankine source panel method. A container ship sailing along a vertical bank and a sloping bank at different forward speeds, different water depths and different distances between the bank and the ship hull is taken as example. The sway force and yaw moment acting on the hull are calculated and the influences of the speed, water depth and distance between the bank and ship hull on the hydrodynamic force and moment are analyzed. This study can provide insight into the bank effects, as well as to give guidance on ship manoeuvring and control in restricted waterways, which is helpful to the navigation safety.     

Effect of remelting current on molten pool profile of titanium alloy ingot during vacuum arc remelting process

The performance of vacuum arc remelting (VAR) ingot depends largely on ingot structure and chemical uniformity, which are strongly influenced by molten pool profile that is influenced by VAR process. To better understand the effect of remelting current on molten pool profile of titanium alloy ingot during VAR process, a 3D finite element model is developed by the ANSYS software. The results show that there are three remelting stages during VAR process when the remelting current is 2.0 kA. The molten pool depth increases gradually from 30 to 320 s, then the change of molten pool depth is very small during the steady state stage from 320 to 386 s, and lastly the molten pool depth becomes shallow after 386 s. The melting rate and temperature of superheat increase with the remelting current increasing, which leads to the augment of molten pool volume. In the end, the total remelting time and steady state molten pool time decrease with the melting current from 1.6 to 2.8 kA.     

Integrated fluid-thermal-structural numerical analysis for the quenching of metallic components

The quenching of a metal component with a channel section in a water tank is numerically simulated. Computational fluid dynamics (CFD) is used to model the multiphase flow and the heat transfer in film boiling, nucleate boiling and convective cooling processes to calculate the difference in heat transfer rate around the component and then combining with the thermal simulation and structure analysis of the component to study the effect of heat transfer rate on the distortion of the U-channel component. A model is also established to calculate the residual stress produced by quenching. The coupling fluid-thermal-structural simulation provides an insight into the deformation of the component and can be used to perform parameter analysis to reduce the distortion of the component.     

Numerical analysis of material properties in deformation of near hemispherical shells

In this paper, the effects of hardening exponent, yield strength and elastic modulus on the deformability of near hemispherical shells are investigated by means of finite element method and orthogonal experiment design. The largest eccentric angle during the deformation process and thickness reduction after the deformation are introduced to estimate the deformability quantitatively according to the deformation characteristics of near hemispherical shells. The results indicate that the hardening exponent is the most influential parameter, followed by elastic modulus and yield strength. The shell exhibits good deformability when the hardening exponent and elastic modulus are in the range of 0.1–0.125 and 70–108 GPa, respectively.     

Dynamic investigation on floating raft with elastic limiters

In this paper, we consider a floating raft isolation system with elastic limiters. The limiters might be “contact” or “no contact”, thus forming a unilateral system generating possible contacts. In order to avoid the large displacement of the floating raft under shock, limiters might be adopted but good limiters design requires the values of the gaps. Based on the contact dynamics, the multi-degree-freedom dynamic model of floating raft isolation system with elastic limiters is established. The artificial neural network has been developed to dingtinguish the contact state of elastic limiters at each step. The example analysis shows that the algorithm of neural network for contact can shorten the time of caclaution. From the example analysis, we get some interesting results that may be useful to the ship engineering.     

Upper limb musculo-skeletal model for biomechanical investigation of elbow flexion movement

A biomechanical musculo-skeletal model of upper limb is presented in this paper, which can provide accurate representations of muscles and joints, and capture important interactions between joints. The upper limb model is made up of seven segments: ribs, sternum, clavicle, scapular, humerus, radius and ulna, considered as a single rigid body respectively and includes 22 muscles. The individual muscle forces can be calculated by using an electromyography (EMG) assisted method, which is verified by comparing the simulation results with other researches of an elbow flexion motion. These comparisons show that the muscle forces and the estimated joint moment match well with previous literatures.     

Numerical simulation of defect inspection using electromagnetically stimulated thermography

The feasibility of electromagnetically stimulated thermography non-destructive testing (NDT) for the detection of defects in metallic conductive materials has been carried out by finite element analysis. Aluminum plates with defects of different diameters, depths, locations, shapes and orientation with respect to eddy current are numerically investigated. ANSYS software is used to solve the coupled electromagnetic and temperature field equations. The peak temperatures on the top surface of circular defects with different diameters and depths are calculated at varying excitation frequencies. It is demonstrated that the obtained temperature inreases with increase of the defect diameter and decrease of its depth. The dependence of the temperature over the top surface of the defect on its location and orientation is also presented. The results indicate that we can detect the subsurface defect and estimate its depth and location by choosing a suitable coil-specimen configuration.     

Modeling on directional solidification of solar cell grade multicrystalline silicon ingot casting

Solar energy is considered as one of the best alternative energy in the future. Multicrystalline silicon ingot casting is the main production process for major supply of solar cell. However, the casting process cannot be understood clearly because of some difficulties, such as enclosed furnace, long cycle time of production and so on. In this paper, an integrated model, including casting process analysis, quality prediction and production parameters optimization, is proposed and the preliminary results are acquired. The framework of the proposed model is introduced and the numerical simulation results on the temperature field and grain growth process are also given out and discussed.     

Threshold signature scheme with threshold verification based on multivariate linear polynomial

Secret sharing schemes are multi-party protocols related to key establishment. They also facilitate distributed trust or shared control for critical activities (e.g., signing corporate cheques and opening bank vaults), by gating the critical action on cooperation from t(t ∈ Z ⁺) of n(n ∈ Z ⁺) users. A (t, n) threshold scheme (t < n) is a method by which a trusted party computes secret shares Γ _i (1 ⩽ i ⩽ n) from an initial secret Γ ₀ and securely distributes Γ _i to user. Any t or more users who pool their shares may easily recover Γ ₀, but any group knowing only t−1 or fewer shares may not. By the ElGamal public key cryptophytes and the Schnorr’s signature scheme, this paper proposes a new (t, n) threshold signature scheme with (k,m) (k,m ∈ Z ⁺) threshold verification based on the multivariate linear polynomial.     

Identity-based key-insulated proxy signature without random oracles

In an identity based proxy signature (IBPS) scheme, a designated proxy signer can generate the signature on behalf of an original signer. Traditional IBPS schemes normally rely on the assumption that private keys are kept perfectly secure. However, due to viruses, worms or other break-ins allowed by operating-system holes, key exposure seems inevitable. To minimize the damage caused by key exposure in IBPS, we propose an identity-based key-insulated proxy signature (IBKIPS) scheme in the standard model, i.e. without random oracles.