Improving maritime inventory routing: application to a Brazilian petroleum case

The crude oil offloading and supply problem (COSP) is a type of operation maritime inventory routing (MIR) problem encountered by petroleum companies. In COSP, the company not only is responsible for the ship scheduling to carry the crude oil from production sites to discharge ports but also must maintain inventory levels at both ports (production and consumption) between safety operational bounds to avoid disruptions in its crude oil production and/or refining processes. We show how to improve significantly the decision-making process in a Brazilian petroleum company using a mixed-integer linear programming (MILP) model to represent COSP. Comparison tests with a current ship-scheduling method adopted in the company indicated that the use of the MILP model increased the transportation efficiency and reduced costs by 20% on average. In addition to the quantitative gains, the use of a MILP model to solve COSP has succeeded when encountering real-life events, such as variation in production or consumption rates, berth unavailability, and changes in the storage capacities at ports.     

A study of the environmental impacts of intelligent automated vehicle control at intersections via V2V and V2I communications

This article presents a novel intersection traffic management system for automated vehicles and quantifies its impact on fuel consumption and greenhouse gas emissions of CO₂ relative to traditional traffic signal and roundabout intersection control. The developed intelligent traffic management (ITM) techniques, which are based on a spatiotemporal reservation scheme, ensure that vehicles proceed through the intersection without colliding with other vehicles while at the same time reducing the intersection delay and environmental impacts. Specifically, the spatiotemporal reservation scheme provides each vehicle a collision-free path that is decomposed into a speed profile along with navigational instructions. The integration of the developed microscopic traffic simulator with instantaneous emission model, provides improved assessments of the environmental impact of traffic control strategies at intersections. The simulator architecture integrates several ITM algorithms, vehicle sensors, V2V/V2I communications, and emission and fuel consumption models. Each vehicle is modeled by an agent and each agent provides information depending on the specific vehicle sensors. The ITM system is supported by V2V and V2I communications, allowing the exchange of information among vehicles and infrastructure. The data include the estimated vehicle position and speed. Compared with traditional traffic management techniques, the simulation results prove that the proposed ITM system reduces CO₂ emissions significantly. The research also shows that these reductions are more significant when the traffic flow increases.     

Safety of child passengers who ride to school on a motorcycle: An observational study in two Argentine cities

In low- and middle-income countries, the motorcycle has increasingly become a means of family transportation due to its low cost and the poor quality of public transportation. Consequently, many child motorcycle passengers are at an elevated risk of serious injury in the event of a traffic crash. The available research on child safety devices is scarce and focused mainly on helmet use, while other devices (e.g. high-visibility clothing) have received little attention. This observational study documented the safety conditions and related factors of primary schoolchildren who rode to school as motorcycle passengers in two cities of Argentina.Data was obtained in the vicinity of 27 public primary schools in two cities of Argentina (one mid-sized city and the other a small city by the country's standards) between May 2018 and September 2019. A total of 1440 motorcycle occupants (656 drivers and 784 child passengers) were observed.The use of an adequate helmet was lower among children (vs. drivers). Most of the children were unable to reach the motorcycle's footrests, did not use high-visibility clothing or a fastening device, carried a backpack, and mounted and dismounted the motorcycle in an unsafe place. Some children rode in front of the driver or in a motorcycle with three or four occupants. Use of helmet by drivers and driver sex (woman) were related with an increase in safety in children. The indicators were worse in the larger city.The results revealed a low level of adoption of safety measures in children as well as in adults in both cities. This suggests that motorcycle travel is unsafe. Greater effort is needed to improve motorcycle safety, especially for children. It is important to debate regulatory details such as a minimum age for passengers, a limit on the number of passengers, and other safety criteria. It is also important to conduct educational campaigns that include the distribution of safety devices.     

Optimal tolls for multi-class traffic: Analytical formulations and policy implications

This paper puts together an analytical formulation to compute optimal tolls for multi-class traffic. The formulation is comprised of two major modules. The first one is an optimization component aimed at computing optimal tolls assuming a Stackelberg game in which the toll agency sets the tolls, and the equilibrating traffic plays the role of the followers. The optimization component is supported by a set of cost models that estimate the externalities as a function of a multivariate vector of traffic flows. These models were estimated using Taylor series expansions of the output obtained from traffic simulations of a hypothetical test case. Of importance to the paper is the total travel time function estimated using this approach that expresses total travel time as a multivariate function of the traffic volumes. The formulation presented in the paper is then applied to a variety of scenarios to gain insight into the optimality of current toll policies. The optimal tolls are computed for two different cases: independent tolls, and tolls proportional to passenger car equivalencies (PCE).The numerical results clearly show that setting tolls proportional to PCEs leads to lower values of welfare that are on average 15% lower than when using independent tolls, though, in some cases the total welfare could be up to 33% lower. This is a consequence of two factors. First, the case of independent tolls has more degrees of freedom than the case of tolls proportional to PCEs. Second, tolls proportional to PCEs do not account for externalities other than congestion, which is likely to lead to lower welfare values.The analytical formulations and numerical results indicate that, because the total travel time is a non-linear function of the traffic volumes, the marginal social costs and thus the optimal congestion tolls also depend on the traffic volumes for each vehicle class. As a result of this, for the relatively low volumes of truck traffic observed in real life, the optimal congestion tolls for trucks could indeed be either lower or about the same as for passenger cars. This stand in sharp contrast with what is implied in the use of PCEs, i.e., that the contribution to congestion are constant. This latter assumption leads to optimal truck congestion tolls that are always proportional to the PCE values.The comparison of the toll ratios (truck tolls divided by passenger car tolls) for both observed and optimal conditions suggests that the tolls for small trucks are about the right level, maybe a slightly lower than optimal. However, the analysis of the toll ratio for large trucks seems to indicate a significant overcharge. The estimates show that the average observed toll ratio for large trucks is even higher than the maximum optimal toll ratio found in the numerical experiments. This suggests that the tolls for large trucks are set on the basis of revenue generation principles while the passenger car tolls are being set based on a mild form of welfare maximization. This leads to a suboptimal cross-subsidization of passenger car traffic in detriment of an important sector of the economy.     

The external cost of speed at sea: An analysis based on selected short sea shipping routes

According to the mid-term review of the EU White Paper on Transport, Short Sea Shipping (SSS) is expected to grow at a rate of 59% (metric tonnes) between 2000 and 2020. If we consider that the overall expected increase in both freight exchanges and volume is 50%, sea transport is one of the most feasible alternatives to reduce traffic congestion on European roads. Maritime transportation may compete with road transport as far as certain traffics are concerned, but only when assuming external costs. This paper analyzes several intermodal transport chains involving a sea leg by comparing the effect of pollutant emissions from different ship types and road transport in terms of potential external cost savings. The translation of these emissions into environmental costs shows, for certain conditions, savings in the case of sea transport that would justify the use of an environmental bonus to promote the sea option.     

Gantry crane operations to transfer containers between trains: A simulation study of a Spanish terminal

Freight transfer operations are critical in combined transport networks. In this paper a simulation model and modelling approach to the transfer of cargo between trains at rail terminals is presented. The model is used to study the Port-Bou terminal, the main intermodal terminal at the Spanish-French frontier. Four different gantry crane operation modes to interchange containers between trains are evaluated. These operation rules are tested in several scenarios to examine the critical factors of the system and the best operation rule for each situation. Latest generation software is used to develop the model that incorporates modular programming and enhanced graphic systems for output representation. It allows a dynamic display of the simulated system and, likewise, the possibility of developing modules that can be reused in other studies. The research shows how simulation can be a useful planning tool in the rail transportation context.     

CO2 air–sea disequilibrium and preformed alkalinity in the Pacific and Indian oceans calculated from subsurface layer data

This work estimates new regionalized empirical parameterizations for preformed alkalinity (A_T^o) and the CO₂ air–sea disequilibrium (?C_dis). Both are key terms for the computation of anthropogenic CO₂ in the back-calculation methods. Data from the subsurface layer (75–180 m depth range) covering an area from North to South and from 19°E to 67.5°W (Pacific and Indian oceans) were taken from GLODAP (The Global Ocean Data Analysis Project) database. The subsurface layer is proved as a reliable reference for representing the main characteristics of the different water masses of the oceans. Besides, handing data from the two ocean basins altogether makes the new parameterizations of A_T^o and ?C_dis to be more globally consistent. Nevertheless, each ocean basin, at least in some regions, has different oceanographic characteristics based on its proper dynamical processes and water masses formation. In order to maintain each ocean basin ‘identity’ the whole domain was divided in six different regions (two of them sharing waters from Pacific and Indian oceans) and parameterizations in each region for both terms were obtained. Previously, data were transformed into a grid of 4°lat. × 5°lon. and the results obtained from the parameterizations were visualized and compare with pCO₂ climatologies. From the comparisons with previous ?C_dis estimations good results are obtained showing the reliability and robustness of the new regionalized empiric parameterizations.     

Gas transfer velocities of CO2 and CH4 in a tropical reservoir and its river downstream

We have measured simultaneously the methane (CH₄) and carbon dioxide (CO₂) surface concentrations and water–air fluxes by floating chambers (FC) in the Petit-Saut Reservoir (French Guiana) and its tidal river (Sinnamary River) downstream of the dam, during the two field experiments in wet (May 2003) and dry season (December 2003). The eddy covariance (EC) technique was also used for CO₂ fluxes on the lake. The comparison of fluxes obtained by FC and EC showed little discrepancies mainly due to differences in measurements durations which resulted in different average wind speeds. When comparing the gas transfer velocity (k₆₀₀) for a given wind speed, both methods gave similar results. On the lake and excluding rainy events, we obtained an exponential relationship between k₆₀₀ and U₁₀, with a significant intercept at 1.7 cm h^− 1, probably due to thermal effects. Gas transfer velocity was also positively related to rainfall rates reaching 26.5 cm h⁻¹ for a rainfall rate of 36 mm h^− 1. During a 24-h experiment in dry season, rainfall accounted for as much as 25% of the k₆₀₀. In the river downstream of the dam, k₆₀₀ values were 3 to 4 times higher than on the lake, and followed a linear relationship with U₁₀.     

Hydrographic cruises off northwest Africa: the Canary Current and the Cape Ghir region

We present hydrographic data for several sections located along the African coastline and off Cape Ghir, carried out at times of weak surface winds (October 1995 and September 1997). The main sections are near the continental slope, at mean distances between 100 and 150 km from the coastline. North of Cape Ghir (31°N) the geostrophic transport (referenced to 650 m) of North Atlantic Central Water through these sections is 3.7 and 2.0 Sv for 1995 and 1997, respectively. This confirms that a major fraction of the water transport by the Canary Current flows east, into the continental slope off northwest Africa, at latitudes above Cape Ghir. Most of this flow continues south past Cape Ghir, along the coast and probably through the eastern passages of the Canary Archipelago. A significant fraction, however, may escape through surface Ekman transport (0.3–0.5 Sv during the early fall season) and by offshore flow at Cape Ghir (1.1 Sv in September 1997, referenced to 650 m). Despite the weak winds the Cape Ghir filament was clearly visible, characterized by localized coastal upwelling associated to a cyclonic shallow structure and cold (and fresh) waters stretching offshore as a very shallow feature (50–100 m deep). The satellite images show that the surface temperature field is highly variable, in rapid response to the surface winds, always with a core region of relatively cold water and commonly with one or two associated eddies. Our results support the existence of two recirculation cells in the area: a horizontal one that connects the interior eastern boundary currents with the coastal region and a vertical one related to both wind-induced and filament upwelling. The data also show a salinity subsurface maximum at the root of the filament, linked to water inflow from northern latitudes, and a subsurface anticyclonic eddy over the Agadir canyon, likely related to the poleward slope undercurrent.     

The influence of variable message signs on en-route diversion between a toll highway and a free competing alternative

Transportation - In the field of road transport, Advanced Traveller Information Systems represent a relevant tool to manage road traffic, improve drivers’ utility and make a more efficient...