Investigation of the impact of locomotive creep control on wear under changing contact conditions

This paper presents the locomotive traction controller performance with respect to the track wear under different operation conditions. In particular, an investigation into the dynamic response of a locomotive under changing wheel–rail friction conditions is performed with an aim to determine the effect of controller setting on track wear. Simulation using a full-scale longitudinal–vertical locomotive dynamic model shows that the appropriately designed creep threshold, controller, settings can effectively maintain a high tractive effort while avoiding excessive rail damage due to wear, especially during acceleration under low speed.     

超高加速度抛射体内电子芯片的两维欧拉-拉格朗日模拟

文章建立两维欧拉—拉格朗日模型以研究抛射体发射过程对其内部电子芯片的冲击及其机理。该模型计入了火药燃烧的两相流动、抛射体结构运动及流固相互作用,其中火药的固体相和气体相分别采用了线性和指数状态方程描述。通过数值结果分析了以位移、弹口速度、加速度表征的抛射体过程中的冲击响应,并讨论了火药比能对抛射体的加速度冲击及对其内部电子芯片的冲击的影响规律。该模拟方法也可供船用智能火炮系统抗冲击分析及船上电子设备生存能力设计时参考。     

利用AGM求解粘弹性地基刚性梁的非线性控制微分方程（英文）

In the present paper a vibrational differential equation governing on a rigid beam on viscoelastic foundation has been investigated. The nonlinear differential equation governing on this vibrating system is solved by a simple and innovative approach, which has been called Akbari-Ganji’s method(AGM). AGM is a very suitable computational process and is usable for solving various nonlinear differential equations. Moreover, using AGM which solving a set of algebraic equations, complicated nonlinear equations can easily be solved without any mathematical operations.Also, the damping ratio and energy lost per cycle for three cycles have been investigated. Furthermore, comparisons have been made between the obtained results by numerical method(Runk45) and AGM. Results showed the high accuracy of AGM. The results also showed that by increasing the amount of initial amplitude of vibration(A), the value of damping ratio will be increased, and the energy lost per cycle decreases by increasing the number of cycle. It is concluded that AGM is a reliable and precise approach for solving differential equations. On the other hand, it is better to say that AGM is able to solve linear and nonlinear differential equations directly in most of the situations. This means that the final solution can be obtained without any dimensionless procedure.Therefore, AGM can be considered as a significant progress in nonlinear sciences.     

Physical and biological correlates of virus dynamics in the southern Beaufort Sea and Amundsen Gulf

As part of the Canadian Arctic Shelf Exchange Study (CASES), we investigated the spatial and seasonal distributions of viruses in relation to biotic (bacteria, chlorophyll-a (chl a)) and abiotic variables (temperature, salinity and depth). Sampling occurred in the southern Beaufort Sea Shelf in the region of the Amundsen Gulf and Mackenzie Shelf, between November 2003 and August 2004. Bacterial and viral abundances estimated by epifluorescence microscopy (EFM) and flow cytometry (FC) were highly correlated (r² = 0.89 and r² = 0.87, respectively), although estimates by EFM were slightly higher (FC = 1.08 × EFM + 0.12 and FC = 1.07 × EFM + 0.43, respectively). Viral abundances ranged from 0.13 × 10⁶ to 23 × 10⁶ ml^− 1, and in surface waters were ~ 2-fold higher during the spring bloom in May and June and ~ 1.5-fold higher during July and August, relative to winter abundances. These increases were coincident with a ~ 6-fold increase in chl a during spring and a ~ 4-fold increase in bacteria during summer. Surface viral abundances near the Mackenzie River were ~ 2-fold higher than in the Mackenzie Shelf and Amundsen Gulf regions during the peak summer discharge, concomitant with a ~ 5.5-fold increase in chl a (up to 2.4 μg l^− 1) and a ~ 2-fold increase in bacterial abundance (up to 22 × 10⁵ ml^− 1). Using FC, two subgroups of viruses and heterotrophic bacteria were defined. A low SYBR-green fluorescence virus subgroup (V2) representing ~ 71% of the total viral abundance, was linked to the abundance of high nucleic acid fluorescence (HNA) bacteria (a proxy for bacterial activity), which represented 42 to 72% of the bacteria in surface layers. A high SYBR-green fluorescence viral subgroup (V1) was more related to high chl a concentrations that occurred in surface waters during spring and at stations near the Mackenzie River plume during the summer discharge. These results suggest that V1 infect phytoplankton, while most V2 are bacteriophages. On the Beaufort Sea shelf, viral abundance displayed seasonal and spatial variations in conjunction with chl a concentration, bacterial abundance and composition, temperature, salinity and depth. The highly dynamic nature of viral abundance and its correlation with increases in chl a concentration and bacterial abundance implies that viruses are important agents of microbial mortality in Arctic shelf waters.     

Hydrography and biogeochemistry of the north western Bay of Bengal and the north eastern Arabian Sea during winter monsoon

The north eastern Arabian Sea and the north western Bay of Bengal within the Indian exclusive economic zone were explored for their environmental characteristics during the winter monsoons of 2000 and 2001 respectively. The two regions were found to respond paradoxically to comparable intensities of the atmospheric forcing. There is an asymmetry in the net heat exchange of these two basins with atmosphere because of the varying thickness of barrier layer. During winter, the convective mixing in the Arabian Sea is driven by net heat loss from the ocean, whereas the Bay of Bengal does not contribute to such large heat loss to the atmosphere. It appears that the subduction of high saline Arabian Sea water mass is the mechanism behind the formation of a barrier layer in the northeast Arabian Sea; whereas that in the Bay of Bengal and the southeast Arabian Sea are already established as due to low saline water mass. The weak barrier layer in the Arabian Sea yields to the predominance of convective mixing to bring in nitrate-rich waters from the deeper layers to the surface, thereby supporting enhanced biological production. On the other hand, the river discharge into the Bay of Bengal during this period results in the formation of a thick and stable barrier layer, which insulates vertical mixing and provide oligotrophic condition in the Bay.     

Experimental evaluation of a vehicle steering assist controller using a driving simulator

Human-in-the-loop driving simulator experiments are conducted to evaluate a proposed robust steering assist controller that is designed on the basis of driver uncertainty modelling. A nominal controller (NC) that is designed without consideration of driver model uncertainty is also tested for comparison. Two types of experiments are proposed: a long driving task with nominal configurations and a short driving task with initially large lateral position error. The data are analysed using both time domain and frequency domain metrics. In the time domain, the standard deviation of lateral position error and percentage of road departure are used. In the frequency domain, the stability margins and crossover frequency are used. The driving simulator results indicate that statistically, the designed robust controller shows improvements in the short driving experiments. The improvements in the long driving experiments are less evident because of driver adaptation. The non-robust NC suffers from high gain and should be avoided. The benefits of considering driver model uncertainty in the design of vehicle steering assist controllers are, therefore, justified.     

Data assimilation with the Ensemble Kalman Filter and the SEIK filter applied to a finite element model of the North Atlantic

Currently there are different approaches to filter algorithms based on the Kalman filter. One of the most used filter algorithms is the Ensemble Kalman Filter (EnKF). It uses a Monte Carlo approach to the filtering problem. Another approach is given by the Singular Evolutive Extended Kalman (SEEK) and Singular Evolutive Interpolated Kalman (SEIK) filters. These filters operate explicitly on a low-dimensional error space which is represented by an ensemble of model states. The EnKF and the SEIK filter have been implemented within a parallel data assimilation framework in the Finite Element Ocean Model FEOM. In order to compare the filter performances of the algorithms, several data assimilation experiments are performed. The filter algorithms have been applied with a model configuration of FEOM for the North Atlantic to assimilate the sea surface height in twin experiments. The dependence of the filter estimates on the represented error subspace is discussed. In the experiments the SEIK algorithm provides better estimates than the EnKF. Furthermore, the SEIK filter is much cheaper in terms of computing time.     

Confidence bounds on structural reliability estimations for offshore platforms

Second-order estimates to measure platform reliability are generated and used to provide an additional space to select safety margins appropriate to the owner's perception or for risk-averse managers. The aleatory and epistemic uncertainties in the parameters of an offshore platform are explicitly considered in the reliability analysis and the platform structural reliability becomes a random variable, assessing then the beneficial effects of a reduction on these uncertainties. One of these benefits is for risk-aversive managers who often demand additional room to make conservative decisions regarding reliability estimations. Proposed here is a procedure to generate the frequency diagram of platform reliability with the use of confidence bounds to support reliability and cost decisions based on percentiles instead of mean values. The concepts are illustrated through a typical offshore platform in Mexico. The frequency diagram of the platform reliability index is built for several alternative designs and three levels of epistemic uncertainty. The results may be applied for decision making on new designs and also on the assessment and optimal inspection, retrofit, and decommissioning of existing platforms.     

Automotive transmission efficiency measurement using a chassis dynamometer

Automotive transmission efficiency measurements are usually performed on purpose-built rigs. A simple model was developed for calculating the overall transmission efficiency of passenger cars by using a chassis dynamometer. Wheel power and engine output were measured, and these values were used for calculations. The proposed method can only be employed for vehicles with manual drive because it requires constant speed measurements. Two case studies were investigated, with front-wheel and rear-wheel drive passenger cars. The results obtained from using the proposed model are in good agreement with data provided in the literature.     

应用于国Ⅲ摩托车的富钯涂层配方的研究

通过对不同催化作用涂层的对比，特别是针对小型摩托车活性、耐久性和贵金属成本的应用设计，提出以钯为主要或单一活性贵金属化合物涂料的研究数据，这些数据是通过使用合成气体反应器，对涂敷后的催化剂进行模拟发动机废气测试得到的。通过试验表明，较低成本的富钯催化涂料可用于小型摩托车的有效减排。此外，在110mL缸头补气与125mL中间补气摩托车上，按照摩托车欧Ⅲ和国Ⅲ排放法规运行ECER40冷起动循环，对不同配方催化剂的活性进行了测试，这些结果将与合成气体反应器测试结果相关联。